Lockwood 202 Exterior Round Corner Plate - Privacy Indicating Emergency Turn & Lever 98 | Artefact Series | Satin Stainless Steel
The Lockwood 202 Series Exterior Plate with Privacy Indicating Emergency Turn and Lever 98 is part of the distinguished Artefact range of round corner plate door furniture - designed, assembled and customised in Australia for the Australian market. This exterior plate combines a privacy indicating emergency turn with Lever 98, providing the complete exterior solution for privacy amenity doors in commercial, healthcare, aged care and public-access buildings.
The privacy indicating emergency turn displays occupied or vacant status from the outside when the inside occupant engages the turn snib, and incorporates an emergency release allowing entry from the exterior in an emergency without damaging the furniture. The 202 Series with lever meets the requirements of AS1428.1-2009 (Design for Access and Mobility). No cylinder or engraving - this is a clean, unadorned plate suited to general commercial privacy door applications paired with a Lockwood Synergy 3570 Series mortice lock.
The 202 Series features the same 162 x 162mm plate profile as the 200 Series but with 10mm radius corners. The plate pairs back-to-back with the 203 Series interior plate (round corner) and is compatible with Lockwood Synergy 3570 and Selector 3770 Series Mortice Locks, latches and push/pull doors. Supplied in Satin Stainless Steel in both left and right hand.
Usually ships in 11 business days
This product is a special order item and cannot be returned. Please confirm handing and suitability before ordering.
Finish
Satin Stainless Steel
SS
Available in left and right hand. Single finish option for this configuration. For Lever 96 in Natural Anodised Aluminium or additional finishes, refer to item code 20214NN/96.
Fire Rated
- Fire rated up to 2 hours in accordance with AS1905.1:2005 (Fire Resistant Doorsets).
- Fire performance is dependent on doorset type and configuration.
- Fire compliance is system-based and limited by the Fire Resistance Level of the complete doorset assembly.
Disability Act Compliance (DDA)
- The Artefact 200 Series with lever meets the requirements of AS1428.1-2009, Design for Access and Mobility.
- Suitable for applications requiring DDA-compliant door hardware under the BCA.
- The privacy indicating emergency turn supports accessible facility management - staff can check occupancy status and enter in an emergency.
- Lever and turn compliance relates to hardware design only and does not imply full building compliance.
Key Features
- Round corner 162 x 162mm exterior plate with 10mm radius corners - Lockwood Artefact 202 Series
- Privacy Indicating Emergency Turn and Lever configuration (Function 14)
- Privacy indicating emergency turn - displays occupied/vacant status from exterior when inside turn snib is engaged
- Emergency release function - allows outside entry in an emergency without damaging the furniture
- Lever 98 - Artefact 200 Series with lever meets AS1428.1-2009
- No cylinder and no engraving - clean unadorned plate face
- Concealed fixings - clean exterior face with no visible screws
- Supplied in trade pack
- Available in left and right hand
- Designed, assembled and customised in Australia for the Australian market
- Tested to Level D8 (500,000 cycles) - AS4145.2-2008
- Fire rated up to 2 hours - AS1905.1:2005
- Pairs back-to-back with the 203 Series interior plate (round corner)
- Compatible with Lockwood Synergy 3570 and Selector 3770 Series Mortice Locks, latches and push/pull doors
- 25-year mechanical warranty
Suitable Uses
- Bathroom, ensuite and amenity room privacy doors in commercial and public buildings
- Accessible bathroom and toilet doors requiring lever entry, occupancy indication and emergency access
- Aged care, healthcare, education and hospitality facilities
- Any interior privacy door requiring occupied/vacant indication from the outside with lever entry
- Fire-rated door assemblies (when paired with a rated Lockwood mortice lock)
- Architecturally specified projects requiring a round corner stainless steel plate profile
Full Specifications
Item Codes
Dimensions & Technical Drawings
Helpful Tips
- Lever 98 vs Lever 96: This plate uses Lever 98. If a broader choice of finishes is required - including Natural Anodised Aluminium - the Lever 96 version (item code 20214NN/96) is available in more finish and handing combinations. Both levers are specified for the 200 Series plate range and both meet AS1428.1-2009.
- Emergency Turn vs Turnknob: This plate has an emergency turn with emergency release (Function 14). If no emergency release is required and the door is paired with a Synergy 3570 lock, refer to the turnknob variant (Function 16, item code 20216NN/96). Consult your building certifier if unsure which is appropriate.
- How the privacy indicator works: When the inside occupant engages the turn snib, the indicator on this exterior plate changes to show occupied. When released it returns to vacant.
- Emergency release: The exterior plate allows staff or carers to open the door in an emergency using a coin, flat tool or dedicated release key without damaging the furniture.
- Exterior plate - pairs with 203 Series: This is the outside face plate. It must be paired with a 203 Series interior plate (round corner) - not a 201 Series (square corner). The interior plate should include a turn snib and lever to complete the amenity door set.
- Concealed fixings: This plate uses concealed fixing studs. The paired interior 203 plate must use visible fixings - confirm this when ordering the interior plate.
- Handing: Determined by which side the hinges are on when facing the door from outside. Left hand = hinges on the left.
- Thick doors: For doors 45-55mm, order long fixing screws SP2000-208 separately.
- Non-returnable: Confirm handing before ordering - this item cannot be returned once purchased.
Lockwood branded products purchased new in Australia from authorised resellers are covered against defects in materials and workmanship for:
- Mechanical components: 25 years
- Electrical and electronic components: 2 years (excluding batteries)
- Everbrass: 25 years
- Stainless Steel, Chrome & Anodised: Up to 10 years
- PVD / VIVID: 10 years
- Symmetry: 5 years
- Decorative finishes (Bronze, Antique, Powdercoat): Typically 2 years
Lockwood 200/202 Series Handle Catalogue
Lockwood Warranty
Lockwood branded products are covered by manufacturer warranties issued by ASSA ABLOY Australia Pty Ltd. Warranty periods vary by product type, with separate cover for mechanical components, electrical and electronic parts, keys, and finishes.
The summary below sets out the standard warranty structure. All warranty claims are handled by Terry's Tradies Pty Ltd and its associated websites, trading names, and subsidiaries. Full terms and exclusions are set out in the official Lockwood warranty document linked at the base of this page.
Warranty Summary
Finish Coverage Guide
- Everbrass finishes: up to 25 years against corrosion, tarnishing and discolouration.
- Stainless steel, polished stainless steel, chrome plating and anodised finishes: typically up to 10 years.
- PVD and VIVID finishes: typically up to 10 years.
- Symmetry range finishes: typically up to 5 years.
- Decorative finishes (Antique Copper, Architectural Bronze, Oil Rubbed Bronze, Aged Brass, Polished Brass, Satin Brass and related variants): typically up to 2 years against corrosion.
- Unlacquered brass finishes naturally age and change appearance over time. This is not considered a defect.
- Tea staining of stainless steel is not covered where the required cleaning and maintenance have not been followed.
How to Make a Claim
- Contact Terry's Tradies Pty Ltd and its associated websites, trading names, and subsidiaries with your proof of original purchase.
- Keep the product securely packed and clearly identified, ready for assessment.
- Where a claim is escalated to the manufacturer, ASSA ABLOY may issue a case number before goods are returned.
- ASSA ABLOY assesses the claim and determines repair, replacement with the same or closest equivalent product, or refund of the purchase price.
Exclusions
- Normal wear and tear.
- Misuse, abuse, accidental damage or use outside published specifications.
- Improper maintenance or failure to follow care instructions.
- Unauthorised modification, repair or use of non-genuine parts.
- Exposure to corrosive environments including coastal air, salt spray, chemicals or pollution.
- Removal, refitment or associated labour charges.
- Products not originally sold in Australia through authorised channels.
These manufacturer warranties apply in addition to your rights under the Australian Consumer Law. Our goods come with guarantees that cannot be excluded under the ACL. You are entitled to a replacement or refund for a major failure and to compensation for any other reasonably foreseeable loss or damage. Where a failure does not amount to a major failure, you are entitled to have the goods repaired or replaced.
