Lockwood 202 Exterior Round Corner Plate - Privacy Indicating Emergency Turn & Lower Cylinder | Satin Stainless Steel
The Lockwood 202 Series Exterior Plate with Privacy Indicating Emergency Turn and Lower Cylinder is part of the distinguished Artefact range of round corner plate door furniture - designed, assembled and customised in Australia for the Australian market. This specialist exterior plate combines a privacy indicating emergency turn displaying occupied/vacant status from outside, with a Lockwood 570 Series oval cylinder hole positioned lower on the plate - providing both keyed staff access and occupancy indication on a single clean exterior face with no lever or pull handle.
The absence of a lever or pull handle on the exterior face makes this plate suited to push-side entry doors or applications where a separate external access device is installed independently. The lower cylinder position accommodates the plate layout alongside the privacy indicator. The privacy indicating emergency turn allows staff or carers to check occupancy status and enter in an emergency without damaging the furniture. The cylinder must be ordered separately as it is not included.
The 202 Series features the same 162 x 162mm plate profile as the 200 Series but with 10mm radius corners. The plate pairs back-to-back with the 203 Series interior plate (round corner) and is compatible with Lockwood Selector 3770 and Synergy 3570 Series Mortice Locks, latches and push/pull doors. Supplied in Satin Stainless Steel in both left and right hand.
Usually ships in 11 business days
This product is a special order item and cannot be returned. Please confirm handing, cylinder compatibility and door configuration before ordering.
Finish
Satin Stainless Steel
SS
Available in left and right hand. Single finish option for this configuration.
Fire Rated
- Tested up to 2 hours with a fire rated Lockwood mortice lock on fire door assemblies in accordance with AS1905.1:2005 (Fire Resistant Doorsets).
- Fire performance is dependent on doorset type and configuration.
- Fire compliance is system-based and limited by the Fire Resistance Level of the complete doorset assembly.
Key Features
- Round corner 162 x 162mm exterior plate with 10mm radius corners - Lockwood Artefact 202 Series
- Privacy Indicating Emergency Turn and Lower Cylinder configuration (Function 19) - no lever or pull handle
- Privacy indicating emergency turn - displays occupied/vacant status from the exterior
- Emergency release function - allows outside entry in an emergency without damaging the furniture
- Lockwood 570 Series oval cylinder hole positioned lower on the plate - 32mm (H) x 18mm (W). Cylinder not included, order separately.
- No exterior lever or pull handle - suited to push-side entry or separate access device installations
- No engraving - clean unadorned plate face
- Concealed fixings - clean exterior face with no visible screws
- Available in left and right hand
- Designed, assembled and customised in Australia for the Australian market
- Tested to Level D8 (500,000 cycles) - AS4145.2-2008
- Fire rated up to 2 hours - AS1905.1:2005
- Pairs back-to-back with the 203 Series interior plate (round corner)
- Compatible with Lockwood Selector 3770 and Synergy 3570 Series Mortice Locks, latches and push/pull doors
- 25-year mechanical warranty
Suitable Uses
- Push-side exterior of accessible bathroom, ensuite and amenity room doors requiring keyed staff access and occupancy indication
- Doors where a separate external access device is fitted and an exterior lever or pull handle is not required on the plate
- Aged care, healthcare, education and public facility doors where staff keyed access must coexist with privacy indication
- Installations where the full pull handle + privacy indicating emergency turn + lower cylinder configuration (Function 47) is not required
- Fire-rated door assemblies (when paired with a rated Lockwood mortice lock)
- Architecturally specified projects requiring a round corner stainless steel plate profile
Full Specifications
Item Codes
Dimensions & Technical Drawings
Helpful Tips
- No lever or pull handle on this plate: This is a plate-only configuration with privacy indicator and lower cylinder. If a lever is required on the exterior face, refer to Function 14 (20214NN/96). If a pull handle is also required, refer to Function 47 (20247NA/P1RSS).
- Lower cylinder position: The cylinder hole is positioned lower on the plate than the standard position to accommodate the privacy indicating emergency turn in the layout. Confirm this suits your door and lock configuration before ordering.
- Cylinder not included: This plate accepts a Lockwood 570 Series oval cylinder (32mm H x 18mm W) but the cylinder is not supplied - order it separately to suit your key system.
- How the privacy indicator works: When the inside occupant engages the turn snib, the indicator on this exterior plate changes to show the room is occupied. When the snib is released it returns to vacant.
- Emergency release: The exterior plate allows staff or carers to open the door in an emergency using a coin, flat tool or dedicated release key without damaging the furniture.
- Exterior plate - pairs with 203 Series: This is the outside face plate. It must be paired with a 203 Series interior plate (round corner) - not a 201 Series (square corner).
- Concealed fixings: This plate uses concealed fixing studs. The paired interior 203 plate must use visible fixings - confirm this when ordering the interior plate.
- Handing: Determined by which side the hinges are on when facing the door from outside. Left hand = hinges on the left.
- Thick doors: For doors 45-55mm, order long fixing screws SP2000-208 separately.
- Non-returnable: This item cannot be returned once ordered - confirm handing, cylinder compatibility and door configuration before purchasing.
Lockwood branded products purchased new in Australia from authorised resellers are covered against defects in materials and workmanship for:
- Mechanical components: 25 years
- Electrical and electronic components: 2 years (excluding batteries)
- Everbrass: 25 years
- Stainless Steel, Chrome & Anodised: Up to 10 years
- PVD / VIVID: 10 years
- Symmetry: 5 years
- Decorative finishes (Bronze, Antique, Powdercoat): Typically 2 years
Lockwood 200/202 Series Handle Catalogue
Lockwood Warranty Overview
Lockwood branded products are covered by manufacturer warranties issued by ASSA ABLOY Australia Pty Ltd. Warranty periods vary depending on product type, mechanical components, electrical elements, and finish category.
This overview summarises the structure of Lockwood warranty coverage. Full terms, exclusions and claim procedures are set out in the official Lockwood Warranty document.
Warranty Periods Summary
Finish Coverage Guide
- Everbrass finishes: up to 25 years against corrosion, tarnishing and discolouration.
- Stainless steel, polished stainless steel, chrome plating and anodised finishes: typically up to 10 years.
- Decorative finishes including Antique Copper, Architectural Bronze, Oil Rubbed Bronze, Aged Brass, Polished Brass, Satin Brass and related variants: typically up to 2 years against corrosion.
- Unlacquered brass finishes will naturally age and change appearance over time. This is not considered a defect.
- Tea staining of stainless steel is not covered where cleaning and maintenance have not been followed.
What the Warranty Covers
- Defects in material and workmanship during the applicable warranty period.
- Assessment by ASSA ABLOY to determine repair, replacement with the same or closest equivalent product, or refund of purchase price.
Common Exclusions
- Normal wear and tear.
- Misuse, abuse, accidental damage or use outside published specifications.
- Improper maintenance or failure to follow care instructions.
- Unauthorised modification, repair or use of non-genuine parts.
- Exposure to corrosive environments including coastal air, salt spray, chemicals or pollution.
- Removal, refitment or associated labour charges.
- Products not originally sold in Australia through authorised channels.
Warranty Claim Process
- Retain proof of original purchase.
- Return the product through the original place of purchase where applicable.
- If claiming directly, obtain a case number before returning goods.
- Products must be securely packed and clearly identified.
- Warranty assessment determines repair, replacement or refund.
Australian Consumer Law
Lockwood warranties operate in addition to rights available under the Australian Consumer Law. Goods come with guarantees that cannot be excluded. Customers may be entitled to a replacement or refund for a major failure and compensation for reasonably foreseeable loss or damage.
Where a product fails to meet acceptable quality standards and the failure does not amount to a major failure, the customer is entitled to repair or replacement.
