Lockwood 202 Exterior Round Corner Plate - Privacy Indicating Emergency Turn Only | Selector 3770 Series | Satin Stainless Steel
The Lockwood 202 Series Exterior Plate with Privacy Indicating Emergency Turn is part of the distinguished Artefact range of round corner plate door furniture - designed, assembled and customised in Australia for the Australian market. This exterior plate is specifically designed for use with the Lockwood Selector 3770 Series Mortice Lock and features a privacy indicating emergency turn only - with no lever on the exterior face.
The privacy indicating emergency turn displays occupied or vacant status from outside when the inside occupant engages the turn snib, and incorporates an emergency release allowing entry from the exterior in an emergency without damaging the furniture. With no lever on the exterior face, this plate is suited to push-side entry doors and pass doors where exterior lever operation is not required, or where a separate access device is fitted independently.
The 202 Series features the same 162 x 162mm plate profile as the 200 Series but with 10mm radius corners. The plate pairs back-to-back with the 203 Series interior plate (round corner). Supplied in Satin Stainless Steel in both left and right hand.
Estimated Warehouse Dispatch
Usually ships in 11 business days
Usually ships in 11 business days
Special Order - Non-Returnable Item
This product is a special order item and cannot be returned. Please confirm lock series compatibility, handing and door configuration before ordering.
This product is a special order item and cannot be returned. Please confirm lock series compatibility, handing and door configuration before ordering.
Finish
Satin Stainless Steel
SS
Available in left and right hand. Single finish option for this configuration.
Fire Rated
- Tested up to 2 hours with a fire rated Lockwood mortice lock on fire door assemblies in accordance with AS1905.1:2005 (Fire Resistant Doorsets).
- Fire performance is dependent on doorset type and configuration.
- Fire compliance is system-based and limited by the Fire Resistance Level of the complete doorset assembly.
Key Features
- Round corner 162 x 162mm exterior plate with 10mm radius corners - Lockwood Artefact 202 Series
- Privacy Indicating Emergency Turn Only configuration (Function 13) - no lever on exterior face
- Privacy indicating emergency turn - displays occupied/vacant status from exterior when inside turn snib is engaged
- Emergency release function - allows outside entry in an emergency without damaging the furniture
- Specifically designated for use with the Lockwood Selector 3770 Series Mortice Lock (cylinder code S)
- No engraving - clean unadorned plate face
- Concealed fixings - clean exterior face with no visible screws
- Available in left and right hand
- Designed, assembled and customised in Australia for the Australian market
- Tested to Level D8 (500,000 cycles) - AS4145.2-2008
- Fire rated up to 2 hours - AS1905.1:2005
- Pairs back-to-back with the 203 Series interior plate (round corner)
- Compatible with Lockwood Selector 3770 Series Mortice Locks, latches and push/pull doors
- 25-year mechanical warranty
Suitable Uses
- Push-side exterior of accessible bathroom, ensuite and amenity room doors where no exterior lever is required
- Pass doors where occupancy indication and emergency access are needed but exterior lever operation is not
- Doors fitted with a separate access device where the plate needs only to carry the privacy indicator and emergency turn
- Aged care, healthcare, education and public facility doors paired with Selector 3770 Series lock systems
- Fire-rated door assemblies (when paired with a rated Lockwood Selector 3770 mortice lock)
- Architecturally specified projects requiring a round corner stainless steel plate profile
Full Specifications
Item Codes
Dimensions & Technical Drawings
Plate dimension drawing showing 162 x 162mm round corner profile with 10mm radius corners and cross-section details.
Standards and compliance reference - fire rating, Level D8 cycling test and anti-corrosion.
Functions diagram showing the full range of compatible plate configurations including privacy indicating emergency turn options for the 202/203 Series.
Part number builder and ordering procedure for the 200/202 Series - including the Selector (S) vs Synergy (N) cylinder designation for functions 13, 14, 16 and 39.
Helpful Tips
- Selector 3770 Series lock only: This plate uses cylinder code S, designating it for the Lockwood Selector 3770 Series Mortice Lock. If you are using a Synergy 3570 Series lock, a different variant with cylinder code N is required - do not order this SKU for a 3570 Series installation.
- No lever on exterior face: This plate provides privacy indication and emergency access only - there is no lever for exterior entry. If an exterior lever is also required, refer to the Privacy Indicating Emergency Turn and Lever variant (Function 14).
- How the privacy indicator works: When the inside occupant engages the turn snib, the indicator changes to show occupied. When released it returns to vacant.
- Emergency release: The exterior plate allows staff or carers to open the door in an emergency using a coin, flat tool or dedicated release key without damaging the furniture.
- Exterior plate - pairs with 203 Series: This is the outside face plate. It must be paired with a 203 Series interior plate (round corner) - not a 201 Series (square corner).
- Concealed fixings: This plate uses concealed fixing studs. The paired interior 203 plate must use visible fixings.
- Handing: Determined by which side the hinges are on when facing the door from outside. Left hand = hinges on the left.
- Thick doors: For doors 45-55mm, order long fixing screws SP2000-208 separately.
- Non-returnable: Confirm lock series and handing before ordering - this item cannot be returned once purchased.
Lockwood Warranty (Australia)
Lockwood branded products purchased new in Australia from authorised resellers are covered against defects in materials and workmanship for:
Lockwood branded products purchased new in Australia from authorised resellers are covered against defects in materials and workmanship for:
- Mechanical components: 25 years
- Electrical and electronic components: 2 years (excluding batteries)
Finish Warranty Guide:
- Everbrass: 25 years
- Stainless Steel, Chrome & Anodised: Up to 10 years
- PVD / VIVID: 10 years
- Symmetry: 5 years
- Decorative finishes (Bronze, Antique, Powdercoat): Typically 2 years
Cosmetic finishes, batteries, normal wear and tear, misuse, unauthorised modification, corrosion and labour or freight costs are excluded.
This warranty operates in addition to rights available under the Australian Consumer Law.
Download PDF Resources
Lockwood 200/202 Series Handle Catalogue
Lockwood 200/202 Series Handle Catalogue
Lockwood Warranty
Lockwood branded products are covered by manufacturer warranties issued by ASSA ABLOY Australia Pty Ltd. Warranty periods vary by product type, with separate cover for mechanical components, electrical and electronic parts, keys, and finishes.
The summary below sets out the standard warranty structure. All warranty claims are handled by Terry's Tradies Pty Ltd and its associated websites, trading names, and subsidiaries. Full terms and exclusions are set out in the official Lockwood warranty document linked at the base of this page.
Warranty Summary
Finish Coverage Guide
- Everbrass finishes: up to 25 years against corrosion, tarnishing and discolouration.
- Stainless steel, polished stainless steel, chrome plating and anodised finishes: typically up to 10 years.
- PVD and VIVID finishes: typically up to 10 years.
- Symmetry range finishes: typically up to 5 years.
- Decorative finishes (Antique Copper, Architectural Bronze, Oil Rubbed Bronze, Aged Brass, Polished Brass, Satin Brass and related variants): typically up to 2 years against corrosion.
- Unlacquered brass finishes naturally age and change appearance over time. This is not considered a defect.
- Tea staining of stainless steel is not covered where the required cleaning and maintenance have not been followed.
How to Make a Claim
For full returns and warranty claim procedures, visit our Returns & Warranty page - this is kept up to date and is the authoritative reference for current claim steps.
- Contact Terry's Tradies Pty Ltd and its associated websites, trading names, and subsidiaries with your proof of original purchase.
- Keep the product securely packed and clearly identified, ready for assessment.
- Where a claim is escalated to the manufacturer, ASSA ABLOY may issue a case number before goods are returned.
- ASSA ABLOY assesses the claim and determines repair, replacement with the same or closest equivalent product, or refund of the purchase price.
Exclusions
- Normal wear and tear.
- Misuse, abuse, accidental damage or use outside published specifications.
- Improper maintenance or failure to follow care instructions.
- Unauthorised modification, repair or use of non-genuine parts.
- Exposure to corrosive environments including coastal air, salt spray, chemicals or pollution.
- Removal, refitment or associated labour charges.
- Products not originally sold in Australia through authorised channels.
Australian Consumer Law
These manufacturer warranties apply in addition to your rights under the Australian Consumer Law. Our goods come with guarantees that cannot be excluded under the ACL. You are entitled to a replacement or refund for a major failure and to compensation for any other reasonably foreseeable loss or damage. Where a failure does not amount to a major failure, you are entitled to have the goods repaired or replaced.
These manufacturer warranties apply in addition to your rights under the Australian Consumer Law. Our goods come with guarantees that cannot be excluded under the ACL. You are entitled to a replacement or refund for a major failure and to compensation for any other reasonably foreseeable loss or damage. Where a failure does not amount to a major failure, you are entitled to have the goods repaired or replaced.
