Lockwood 202 Exterior Round Corner Plate - Privacy Indicating Emergency Turn & P1 Pull Handle | Satin Stainless Steel
The Lockwood 202 Series Exterior Plate with Privacy Indicating Emergency Turn and P1 Pull Handle is part of the distinguished Artefact range of round corner plate door furniture - designed, assembled and customised in Australia for the Australian market. This exterior plate configuration is specifically designed for privacy rooms such as accessible bathrooms, ensuites and amenity facilities, combining a P1 stainless steel pull handle with a privacy indicating emergency turn that displays the room's occupied or vacant status to those outside.
The privacy indicating emergency turn allows the inside occupant to engage a turn snib for privacy, while the indicator on the exterior face clearly shows whether the room is occupied or vacant. An emergency release function is also incorporated, allowing the door to be opened from the outside in an emergency without damaging the furniture - critical for accessible and public facility applications.
The 202 Series features the same 162 x 162mm plate profile as the 200 Series but with 10mm radius corners, giving a softer, contemporary aesthetic. Concealed fixings at four points provide a clean exterior face. Compatible with Lockwood Synergy 3570 and Selector 3770 Series Mortice Locks, latches, and push/pull doors. Supplied in Satin Stainless Steel in both left and right hand.
Usually ships in 11 business days
This product is a special order item and cannot be returned. Please confirm handing and suitability before ordering.
Finish
Satin Stainless Steel
SS
Available in left and right hand. Single finish option for this configuration.
Fire Rated
- Fire rated up to 2 hours in accordance with AS1905.1:2005 (Fire Resistant Doorsets).
- Fire performance is dependent on doorset type and configuration.
- Fire compliance is system-based and limited by the Fire Resistance Level of the complete doorset assembly.
Key Features
- Round corner 162 x 162mm exterior plate with 10mm radius corners - Lockwood Artefact 202 Series
- Pull Handle and Privacy Indicating Emergency Turn configuration (Function 28)
- P1 stainless steel pull handle on exterior face
- Privacy indicating emergency turn - displays occupied/vacant status from the exterior
- Emergency release function - allows outside entry in an emergency without damaging the furniture
- Concealed fixings at 4 points - clean exterior face with no visible screws
- Available in left and right hand
- Slim-line profile suited to public, commercial, industrial and institutional buildings
- Designed, assembled and customised in Australia for the Australian market
- Tested to Level D8 (500,000 cycles) - AS4145.2-2008
- Fire rated up to 2 hours - AS1905.1:2005
- Pairs back-to-back with the 203 Series interior plate (round corner)
- Compatible with Lockwood Synergy 3570 and Selector 3770 Series Mortice Locks, latches and push/pull doors
- Supplied in trade pack
- 25-year mechanical warranty
Suitable Uses
- Accessible bathroom, ensuite and toilet facility doors in commercial and public buildings
- Any privacy room requiring occupied/vacant indication from the outside
- Aged care, healthcare, education and hospitality facilities
- Change rooms and amenity facilities where emergency access may be required
- Fire-rated door assemblies (when paired with a rated Lockwood mortice lock)
- Architecturally specified projects requiring a round corner plate profile in stainless steel
Full Specifications
Item Codes
Dimensions & Technical Drawings
Helpful Tips
- Exterior plate - pairs with 203 Series: This is the outside face plate. It must be paired with a 203 Series interior plate (round corner) - not a 201 Series (square corner).
- How the privacy indicator works: When the occupant engages the inside turn snib, the indicator on this exterior plate changes to show the room is occupied. When the snib is released, the indicator returns to vacant. No key is required to read the status.
- Emergency release: The exterior plate incorporates an emergency release - the door can be opened from outside in an emergency (e.g. if an occupant is incapacitated) using a coin, flat tool or dedicated release key, without damaging the furniture.
- Concealed fixings: This plate uses concealed fixing studs, not visible screws. The paired interior 203 plate must use visible fixings - confirm pairing before ordering.
- Handing: Determined by which side the hinges are on when facing the door from outside. Left hand = hinges on the left.
- 202 vs 200 Series: The 202 Series has 10mm radius round corners. If square corners are required, refer to the 200 Series equivalent.
- Thick doors: For doors 45-55mm, order long fixing screws SP2000-208 separately.
- Non-returnable: This item cannot be returned once ordered - confirm handing and suitability before purchasing.
Lockwood branded products purchased new in Australia from authorised resellers are covered against defects in materials and workmanship for:
- Mechanical components: 25 years
- Electrical and electronic components: 2 years (excluding batteries)
- Everbrass: 25 years
- Stainless Steel, Chrome & Anodised: Up to 10 years
- PVD / VIVID: 10 years
- Symmetry: 5 years
- Decorative finishes (Bronze, Antique, Powdercoat): Typically 2 years
Lockwood 200/202 Series Handle Catalogue
Lockwood Warranty
Lockwood branded products are covered by manufacturer warranties issued by ASSA ABLOY Australia Pty Ltd. Warranty periods vary by product type, with separate cover for mechanical components, electrical and electronic parts, keys, and finishes.
The summary below sets out the standard warranty structure. All warranty claims are handled by Terry's Tradies Pty Ltd and its associated websites, trading names, and subsidiaries. Full terms and exclusions are set out in the official Lockwood warranty document linked at the base of this page.
Warranty Summary
Finish Coverage Guide
- Everbrass finishes: up to 25 years against corrosion, tarnishing and discolouration.
- Stainless steel, polished stainless steel, chrome plating and anodised finishes: typically up to 10 years.
- PVD and VIVID finishes: typically up to 10 years.
- Symmetry range finishes: typically up to 5 years.
- Decorative finishes (Antique Copper, Architectural Bronze, Oil Rubbed Bronze, Aged Brass, Polished Brass, Satin Brass and related variants): typically up to 2 years against corrosion.
- Unlacquered brass finishes naturally age and change appearance over time. This is not considered a defect.
- Tea staining of stainless steel is not covered where the required cleaning and maintenance have not been followed.
How to Make a Claim
- Contact Terry's Tradies Pty Ltd and its associated websites, trading names, and subsidiaries with your proof of original purchase.
- Keep the product securely packed and clearly identified, ready for assessment.
- Where a claim is escalated to the manufacturer, ASSA ABLOY may issue a case number before goods are returned.
- ASSA ABLOY assesses the claim and determines repair, replacement with the same or closest equivalent product, or refund of the purchase price.
Exclusions
- Normal wear and tear.
- Misuse, abuse, accidental damage or use outside published specifications.
- Improper maintenance or failure to follow care instructions.
- Unauthorised modification, repair or use of non-genuine parts.
- Exposure to corrosive environments including coastal air, salt spray, chemicals or pollution.
- Removal, refitment or associated labour charges.
- Products not originally sold in Australia through authorised channels.
These manufacturer warranties apply in addition to your rights under the Australian Consumer Law. Our goods come with guarantees that cannot be excluded under the ACL. You are entitled to a replacement or refund for a major failure and to compensation for any other reasonably foreseeable loss or damage. Where a failure does not amount to a major failure, you are entitled to have the goods repaired or replaced.
