Lockwood 202 Exterior Round Corner Plate - Privacy Indicating Emergency Turn & Lever 96 | Artefact Series
The Lockwood 202 Series Exterior Plate with Privacy Indicating Emergency Turn and Lever 96 is part of the distinguished Artefact range of round corner plate door furniture - designed, assembled and customised in Australia for the Australian market. This exterior plate combines a privacy indicating emergency turn with a DDA-compliant Lever 96, providing the complete exterior solution for privacy amenity doors in commercial, healthcare, aged care and public-access buildings.
The privacy indicating emergency turn displays occupied or vacant status from the outside when the inside occupant engages the turn snib, and incorporates an emergency release allowing entry from the exterior in an emergency without damaging the furniture. Lever 96 provides compliant lever-operated access in accordance with AS1428.1-2009 (Design for Access and Mobility). No cylinder or engraving - this is a clean, unadorned plate suited to general commercial privacy door applications.
The 202 Series features the same 162 x 162mm plate profile as the 200 Series but with 10mm radius corners. The plate pairs back-to-back with the 203 Series interior plate (round corner) and is compatible with Lockwood Selector 3770 and Synergy 3570 Series Mortice Locks, latches and push/pull doors. Available in Natural Anodised Aluminium and Satin Stainless Steel, both left and right hand.
Usually ships in 11 business days
This product is a special order item and cannot be returned. Please confirm finish and handing before ordering.
Available Finish Options
Natural Anodised
NT
Satin Stainless Steel
SS
Both finishes available in left and right hand. Finish selection does not affect functionality or compliance.
Fire Rated
- Tested up to 2 hours with a fire rated Lockwood mortice lock on fire door assemblies in accordance with AS1905.1:2005 (Fire Resistant Doorsets).
- Fire performance is dependent on doorset type and configuration.
- Fire compliance is system-based and limited by the Fire Resistance Level of the complete doorset assembly.
Disability Act Compliance (DDA)
- Lever 96 meets the requirements of AS1428.1-2009, Design for Access and Mobility.
- Suitable for applications requiring DDA-compliant door hardware under the BCA.
- The privacy indicating emergency turn supports accessible facility management - staff can check occupancy and enter in an emergency.
- Lever and turn compliance relates to hardware design only and does not imply full building compliance.
Key Features
- Round corner 162 x 162mm exterior plate with 10mm radius corners - Lockwood Artefact 202 Series
- Privacy Indicating Emergency Turn and Lever configuration (Function 14)
- Privacy indicating emergency turn - displays occupied/vacant status from exterior when inside turn snib is engaged
- Emergency release function - allows outside entry in an emergency without damaging the furniture
- Lever 96 - AS1428.1-2009 compliant accessible lever for entry
- No engraving and no cylinder - clean unadorned plate face
- Concealed fixings - clean exterior face with no visible screws
- Available in Natural Anodised Aluminium and Satin Stainless Steel, left and right hand
- Designed, assembled and customised in Australia for the Australian market
- Tested to Level D8 (500,000 cycles) - AS4145.2-2008
- Fire rated up to 2 hours - AS1905.1:2005
- Pairs back-to-back with the 203 Series interior plate (round corner)
- Compatible with Lockwood Selector 3770 and Synergy 3570 Series Mortice Locks, latches and push/pull doors
- 25-year mechanical warranty
Suitable Uses
- Bathroom, ensuite and amenity room privacy doors in commercial and public buildings
- Accessible bathroom and toilet doors requiring lever entry, occupancy indication and emergency access
- Aged care, healthcare, education and hospitality facilities
- Any interior privacy door requiring occupied/vacant indication from the outside with lever entry
- Fire-rated door assemblies (when paired with a rated Lockwood mortice lock)
- Architecturally specified projects requiring a round corner plate in natural anodised aluminium or satin stainless steel
Full Specifications
Item Codes
Dimensions & Technical Drawings
Helpful Tips
- Exterior plate - pairs with 203 Series: This is the outside face plate. It must be paired with a 203 Series interior plate (round corner) - not a 201 Series (square corner). The interior plate for a privacy amenity door typically includes a turn snib and lever.
- No engraving on this variant: This plate has no symbol or text engraving. If accessible symbol identification is also required on the plate face, refer to the DDA symbol variant (item code 20214EN/96RSS) which adds the disability symbol outlined infill engraving.
- How the privacy indicator works: When the inside occupant engages the turn snib, the indicator on this exterior plate changes to show the room is occupied. When the snib is released it returns to vacant.
- Emergency release: The exterior plate allows staff or carers to open the door in an emergency using a coin, flat tool or dedicated release key without damaging the furniture.
- Natural Anodised Aluminium plate thickness: The NT (aluminium) variants are 3mm thick vs 2mm for the SS (stainless steel) variants - this is a standard Artefact Series material difference and does not affect function or fixing.
- Concealed fixings: This plate uses concealed fixing studs. The paired interior 203 plate must use visible fixings - confirm this when ordering the interior plate.
- Handing: Determined by which side the hinges are on when facing the door from outside. Left hand = hinges on the left.
- 202 vs 200 Series: The 202 Series has 10mm radius round corners. If square corners are required, refer to the equivalent 200 Series plate.
- Thick doors: For doors 45-55mm, order long fixing screws SP2000-208 separately.
- Non-returnable: Confirm finish and handing before ordering - this item cannot be returned once purchased.
Lockwood branded products purchased new in Australia from authorised resellers are covered against defects in materials and workmanship for:
- Mechanical components: 25 years
- Electrical and electronic components: 2 years (excluding batteries)
- Everbrass: 25 years
- Stainless Steel, Chrome & Anodised: Up to 10 years
- PVD / VIVID: 10 years
- Symmetry: 5 years
- Decorative finishes (Bronze, Antique, Powdercoat): Typically 2 years
Lockwood 200/202 Series Handle Catalogue
Lockwood Warranty Overview
Lockwood branded products are covered by manufacturer warranties issued by ASSA ABLOY Australia Pty Ltd. Warranty periods vary depending on product type, mechanical components, electrical elements, and finish category.
This overview summarises the structure of Lockwood warranty coverage. Full terms, exclusions and claim procedures are set out in the official Lockwood Warranty document.
Warranty Periods Summary
Finish Coverage Guide
- Everbrass finishes: up to 25 years against corrosion, tarnishing and discolouration.
- Stainless steel, polished stainless steel, chrome plating and anodised finishes: typically up to 10 years.
- Decorative finishes including Antique Copper, Architectural Bronze, Oil Rubbed Bronze, Aged Brass, Polished Brass, Satin Brass and related variants: typically up to 2 years against corrosion.
- Unlacquered brass finishes will naturally age and change appearance over time. This is not considered a defect.
- Tea staining of stainless steel is not covered where cleaning and maintenance have not been followed.
What the Warranty Covers
- Defects in material and workmanship during the applicable warranty period.
- Assessment by ASSA ABLOY to determine repair, replacement with the same or closest equivalent product, or refund of purchase price.
Common Exclusions
- Normal wear and tear.
- Misuse, abuse, accidental damage or use outside published specifications.
- Improper maintenance or failure to follow care instructions.
- Unauthorised modification, repair or use of non-genuine parts.
- Exposure to corrosive environments including coastal air, salt spray, chemicals or pollution.
- Removal, refitment or associated labour charges.
- Products not originally sold in Australia through authorised channels.
Warranty Claim Process
- Retain proof of original purchase.
- Return the product through the original place of purchase where applicable.
- If claiming directly, obtain a case number before returning goods.
- Products must be securely packed and clearly identified.
- Warranty assessment determines repair, replacement or refund.
Australian Consumer Law
Lockwood warranties operate in addition to rights available under the Australian Consumer Law. Goods come with guarantees that cannot be excluded. Customers may be entitled to a replacement or refund for a major failure and compensation for reasonably foreseeable loss or damage.
Where a product fails to meet acceptable quality standards and the failure does not amount to a major failure, the customer is entitled to repair or replacement.
