Lockwood 202 Exterior Round Corner Plate - Cylinder & Lever 96 | Artefact Series
The Lockwood 202 Series Exterior Plate with Cylinder and Lever 96 is part of the distinguished Artefact range of round corner plate door furniture - designed, assembled and customised in Australia for the Australian market. This is the standard keyed entry exterior plate configuration for the 202 Series, combining a Lockwood 570 Series oval cylinder hole with a DDA-compliant Lever 96 for lever-operated keyed access on commercial, institutional and residential entry doors.
The cylinder must be ordered separately as it is not included with the plate. With six finish options spanning Natural Anodised Aluminium, Satin and Polished Stainless Steel, 316 Marine Grade, Polished Brass and Satin Brass, this plate offers the broadest finish range in the 202 Series - suited to a wide range of architectural styles from contemporary stainless to traditional brass aesthetics.
The 202 Series features the same 162 x 162mm plate profile as the 200 Series but with 10mm radius corners. The plate pairs back-to-back with the 203 Series interior plate (round corner) and is compatible with Lockwood Selector 3770 and Synergy 3570 Series Mortice Locks, latches and push/pull doors.
Usually ships in 11 business days
This product is a special order item and cannot be returned. Please confirm finish, handing and cylinder compatibility before ordering.
Available Finish Options
316 Marine Grade
MG
Natural Anodised
NT
Polished Brass
PB
Polished Stainless Steel
PS
Satin Brass
SB - Left Hand only-
Satin Stainless Steel
SS
Satin Brass is available in Left Hand only. All other finishes are available in both left and right hand. Polished Brass and Satin Brass are decorative finishes - refer to the finish warranty guide below for applicable coverage.
Fire Rated
- Tested up to 2 hours with a fire rated Lockwood mortice lock on fire door assemblies in accordance with AS1905.1:2005 (Fire Resistant Doorsets).
- Fire performance is dependent on doorset type and configuration.
- Fire compliance is system-based and limited by the Fire Resistance Level of the complete doorset assembly.
Disability Act Compliance (DDA)
- Lever 96 meets the requirements of AS1428.1-2009, Design for Access and Mobility.
- Suitable for applications requiring DDA-compliant door hardware under the BCA.
- Lever compliance relates to handle design only and does not imply full building compliance.
Key Features
- Round corner 162 x 162mm exterior plate with 10mm radius corners - Lockwood Artefact 202 Series
- Cylinder and Lever configuration (Function 01) - standard keyed entry exterior plate
- Accepts Lockwood 570 Series oval cylinder - 32mm (H) x 18mm (W) - cylinder not included, order separately
- Lever 96 - AS1428.1-2009 compliant accessible lever
- Broadest finish range in the 202 Series - six options including brass and marine grade
- No engraving - clean unadorned plate face
- Concealed fixings - clean exterior face with no visible screws
- Available in left and right hand across most finishes; Satin Brass left hand only
- Designed, assembled and customised in Australia for the Australian market
- Tested to Level D8 (500,000 cycles) - AS4145.2-2008
- Fire rated up to 2 hours - AS1905.1:2005
- Pairs back-to-back with the 203 Series interior plate (round corner)
- Compatible with Lockwood Selector 3770 and Synergy 3570 Series Mortice Locks, latches and push/pull doors
- 25-year mechanical warranty
Suitable Uses
- Keyed entry doors in commercial, institutional and residential buildings
- Office, retail, hospitality and public building entry doors
- DDA-compliant accessible entry door installations
- Coastal and marine environments (316 Marine Grade finish)
- Traditional and heritage-style buildings (Polished Brass or Satin Brass finishes)
- Fire-rated door assemblies (when paired with a rated Lockwood mortice lock)
- Architecturally specified projects requiring a round corner plate profile across a broad range of finishes
Full Specifications
Item Codes
Dimensions & Technical Drawings
Helpful Tips
- Cylinder not included: This plate accepts a Lockwood 570 Series oval cylinder (32mm H x 18mm W) but the cylinder is not supplied - order it separately to suit your key system.
- Satin Brass - Left Hand only: RSB (Right Hand Satin Brass) is not available in the current range. If right hand Satin Brass is required, contact us to confirm special order availability.
- Decorative finish warranty: Polished Brass and Satin Brass are decorative finishes and carry a shorter finish warranty than stainless steel or anodised - refer to the finish warranty guide below.
- Plate thickness by material: Natural Anodised Aluminium (NT) plates are 3mm thick; all stainless steel and brass variants are 2mm thick. This is a standard Artefact Series material difference and does not affect function or fixing.
- Exterior plate - pairs with 203 Series: This is the outside face plate. It must be paired with a 203 Series interior plate (round corner) - not a 201 Series (square corner).
- Concealed fixings: This plate uses concealed fixing studs. The paired interior 203 plate must use visible fixings - confirm this when ordering the interior plate.
- Handing: Determined by which side the hinges are on when facing the door from outside. Left hand = hinges on the left.
- 202 vs 200 Series: The 202 Series has 10mm radius round corners. If square corners are required, refer to the equivalent 200 Series plate.
- Thick doors: For doors 45-55mm, order long fixing screws SP2000-208 separately.
- Non-returnable: Confirm finish and handing before ordering - this item cannot be returned once purchased.
Lockwood branded products purchased new in Australia from authorised resellers are covered against defects in materials and workmanship for:
- Mechanical components: 25 years
- Electrical and electronic components: 2 years (excluding batteries)
- Everbrass: 25 years
- Stainless Steel, Chrome & Anodised: Up to 10 years
- PVD / VIVID: 10 years
- Symmetry: 5 years
- Decorative finishes (Bronze, Antique, Powdercoat): Typically 2 years
Lockwood 200/202 Series Handle Catalogue
Lockwood Warranty Overview
Lockwood branded products are covered by manufacturer warranties issued by ASSA ABLOY Australia Pty Ltd. Warranty periods vary depending on product type, mechanical components, electrical elements, and finish category.
This overview summarises the structure of Lockwood warranty coverage. Full terms, exclusions and claim procedures are set out in the official Lockwood Warranty document.
Warranty Periods Summary
Finish Coverage Guide
- Everbrass finishes: up to 25 years against corrosion, tarnishing and discolouration.
- Stainless steel, polished stainless steel, chrome plating and anodised finishes: typically up to 10 years.
- Decorative finishes including Antique Copper, Architectural Bronze, Oil Rubbed Bronze, Aged Brass, Polished Brass, Satin Brass and related variants: typically up to 2 years against corrosion.
- Unlacquered brass finishes will naturally age and change appearance over time. This is not considered a defect.
- Tea staining of stainless steel is not covered where cleaning and maintenance have not been followed.
What the Warranty Covers
- Defects in material and workmanship during the applicable warranty period.
- Assessment by ASSA ABLOY to determine repair, replacement with the same or closest equivalent product, or refund of purchase price.
Common Exclusions
- Normal wear and tear.
- Misuse, abuse, accidental damage or use outside published specifications.
- Improper maintenance or failure to follow care instructions.
- Unauthorised modification, repair or use of non-genuine parts.
- Exposure to corrosive environments including coastal air, salt spray, chemicals or pollution.
- Removal, refitment or associated labour charges.
- Products not originally sold in Australia through authorised channels.
Warranty Claim Process
- Retain proof of original purchase.
- Return the product through the original place of purchase where applicable.
- If claiming directly, obtain a case number before returning goods.
- Products must be securely packed and clearly identified.
- Warranty assessment determines repair, replacement or refund.
Australian Consumer Law
Lockwood warranties operate in addition to rights available under the Australian Consumer Law. Goods come with guarantees that cannot be excluded. Customers may be entitled to a replacement or refund for a major failure and compensation for reasonably foreseeable loss or damage.
Where a product fails to meet acceptable quality standards and the failure does not amount to a major failure, the customer is entitled to repair or replacement.
