Lockwood 202 Exterior Round Corner Plate - Lever 96 Only | Artefact Series | Multiple Finishes
The Lockwood 202 Series Exterior Plate with Lever 96 Only is part of the distinguished Artefact range of round corner plate door furniture - designed, assembled and customised in Australia for the Australian market. This exterior plate provides a DDA-compliant Lever 96 on the exterior face with no cylinder, allowing unkeyed lever-operated entry from outside. No key is required - the lever directly retracts the latch.
This configuration is suited to doors where free entry from outside is permitted - offices, classrooms, retail areas, or any door where the latch is the primary closure and keyed security is not required on the exterior. With six finish options including the distinctive Oil Rubbed Bronze and Marine Grade stainless steel, this plate offers the broadest finish range in the lever-only 202 Series. Oil Rubbed Bronze is available in Right Hand only. Polished Stainless Steel is Left Hand only. The plate pairs back-to-back with the 203 Series interior plate.
Usually ships in 11 business days
Please confirm finish, handing and suitability before ordering.
Available Finish Options
316 Marine Grade
MG
Natural Anodised
NT
Polished Brass
PB
Polished Stainless Steel
PS
Left Hand only-
Satin Stainless Steel
SS 
Oil Rubbed Bronze
ORB
Right Hand only
Oil Rubbed Bronze (ORB): Right Hand only. Polished Stainless Steel (PS): Left Hand only. All other finishes available in both hands. Polished Brass and Oil Rubbed Bronze are decorative finishes - refer to finish warranty guide below.
Fire Rated
- Fire rated up to 2 hours - AS1905.1:2005. Fire performance is dependent on doorset type and configuration. Compliance is system-based and limited by the FRL of the complete doorset assembly.
Disability Act Compliance (DDA)
- The Artefact 200 Series with lever meets the requirements of AS1428.1-2009, Design for Access and Mobility.
- Suitable for applications requiring DDA-compliant door hardware under the BCA. Lever compliance relates to handle design only and does not imply full building compliance.
Key Features
- Round corner 162 x 162mm exterior plate with 10mm radius corners - Lockwood Artefact 202 Series
- Lever Only (Function 05) - lever retracts latch from exterior, no cylinder or key required
- Lever 96 - AS1428.1-2009 compliant accessible lever
- No engraving - clean unadorned plate face
- Six finish options including 316 Marine Grade, Oil Rubbed Bronze and Polished Brass
- Concealed fixings at 4 points. Supplied in trade pack.
- Designed, assembled and customised in Australia
- Tested to Level D8 (500,000 cycles) - AS4145.2-2008. Fire rated to 2 hours - AS1905.1:2005
- Pairs back-to-back with the 203 Series interior plate (round corner). 25-year mechanical warranty.
Suitable Uses
- Office, classroom, retail and amenity doors where free unkeyed entry from outside is permitted
- Doors where a latch provides the primary closure and exterior keyed security is not required
- DDA-compliant accessible entry doors (lever meets AS1428.1-2009)
- Coastal and marine environments (316 Marine Grade finish)
- Heritage and traditional-style buildings (Polished Brass or Oil Rubbed Bronze finishes)
- Fire-rated door assemblies (when paired with a rated Lockwood mortice lock)
Full Specifications
Item Codes
Dimensions & Technical Drawings
Helpful Tips
- No cylinder - free exterior entry: The lever retracts the latch without a key. If keyed exterior access is required, refer to the Cylinder and Lever variant (20201NA/96 or 20201NA/98).
- Oil Rubbed Bronze - Right Hand only; Polished Stainless Steel - Left Hand only. Contact us if the opposite hand is required in these finishes.
- Decorative finish warranty: Polished Brass and Oil Rubbed Bronze are decorative finishes with a shorter finish warranty than stainless steel or anodised - refer to the warranty guide below.
- Exterior plate - pairs with 203 Series: This is the outside face plate. It must be paired with a 203 Series interior plate (round corner) - not a 201 Series. The interior plate must use visible fixings.
- Handing: Determined by which side the hinges are on when facing the door from outside. Left hand = hinges on the left.
- 202 vs 200 Series: The 202 Series has 10mm radius round corners. For square corners refer to the equivalent 200 Series plate.
- Thick doors: For doors 45-55mm, order long fixing screws SP2000-208 separately.
- Non-returnable: Confirm finish and handing before ordering - this item cannot be returned once purchased.
Mechanical: 25 years. Electrical/electronic: 2 years (excl. batteries).
- Everbrass: 25 years
- Stainless Steel, Chrome & Anodised: Up to 10 years
- PVD / VIVID: 10 years
- Symmetry: 5 years
- Decorative finishes (Bronze, Antique, Powdercoat): Typically 2 years
Lockwood 200/202 Series Handle Catalogue
Lockwood Warranty Overview
Lockwood branded products are covered by manufacturer warranties issued by ASSA ABLOY Australia Pty Ltd. Warranty periods vary depending on product type, mechanical components, electrical elements, and finish category.
This overview summarises the structure of Lockwood warranty coverage. Full terms, exclusions and claim procedures are set out in the official Lockwood Warranty document.
Warranty Periods Summary
Finish Coverage Guide
- Everbrass finishes: up to 25 years against corrosion, tarnishing and discolouration.
- Stainless steel, polished stainless steel, chrome plating and anodised finishes: typically up to 10 years.
- Decorative finishes including Antique Copper, Architectural Bronze, Oil Rubbed Bronze, Aged Brass, Polished Brass, Satin Brass and related variants: typically up to 2 years against corrosion.
- Unlacquered brass finishes will naturally age and change appearance over time. This is not considered a defect.
- Tea staining of stainless steel is not covered where cleaning and maintenance have not been followed.
What the Warranty Covers
- Defects in material and workmanship during the applicable warranty period.
- Assessment by ASSA ABLOY to determine repair, replacement with the same or closest equivalent product, or refund of purchase price.
Common Exclusions
- Normal wear and tear.
- Misuse, abuse, accidental damage or use outside published specifications.
- Improper maintenance or failure to follow care instructions.
- Unauthorised modification, repair or use of non-genuine parts.
- Exposure to corrosive environments including coastal air, salt spray, chemicals or pollution.
- Removal, refitment or associated labour charges.
- Products not originally sold in Australia through authorised channels.
Warranty Claim Process
- Retain proof of original purchase.
- Return the product through the original place of purchase where applicable.
- If claiming directly, obtain a case number before returning goods.
- Products must be securely packed and clearly identified.
- Warranty assessment determines repair, replacement or refund.
Australian Consumer Law
Lockwood warranties operate in addition to rights available under the Australian Consumer Law. Goods come with guarantees that cannot be excluded. Customers may be entitled to a replacement or refund for a major failure and compensation for reasonably foreseeable loss or damage.
Where a product fails to meet acceptable quality standards and the failure does not amount to a major failure, the customer is entitled to repair or replacement.
