Lockwood 202 Exterior Round Corner Plate - Custom Engraving, Cylinder & Lever 98 | Artefact Series
The Lockwood 202 Series Exterior Plate with Custom Engraving, Cylinder and Lever 98 is part of the distinguished Artefact range of round corner plate door furniture - designed, assembled and customised in Australia for the Australian market. This exterior plate configuration combines a custom miscellaneous engraving with a Lockwood 570 Series oval cylinder hole and Lever 98, providing keyed entry access and lever operation alongside customer-specified engraved text or symbols for identification, wayfinding or instructional purposes.
The custom engraving option allows this plate to be specified with non-standard text or symbols beyond the standard range of push, pull, male, female, disabled and unisex engraving options. This makes it suited to specialist commercial, institutional and government applications where specific room identification or custom signage is required directly on the door furniture plate. The cylinder must be ordered separately as it is not included.
The 202 Series features the same 162 x 162mm plate profile as the 200 Series but with 10mm radius corners. The plate pairs back-to-back with the 203 Series interior plate (round corner) and is compatible with Lockwood Selector 3770 and Synergy 3570 Series Mortice Locks, latches and push/pull doors. Supplied in Satin Stainless Steel in both left and right hand.
Usually ships in 11 business days
This product is a special order item incorporating a custom engraving. Please confirm engraving content, handing and suitability before ordering as it cannot be returned.
Finish
Satin Stainless Steel
SS
Available in left and right hand. Single finish option for this configuration.
Fire Rated
- Tested up to 2 hours with a fire rated Lockwood mortice lock on fire door assemblies in accordance with AS1905.1:2005 (Fire Resistant Doorsets).
- Fire performance is dependent on doorset type and configuration.
- Fire compliance is system-based and limited by the Fire Resistance Level of the complete doorset assembly.
Disability Act Compliance (DDA)
- The Artefact 200 Series with lever meets the requirements of AS1428.1-2009, Design for Access and Mobility.
- Suitable for applications requiring DDA-compliant door hardware under the BCA.
- Lever compliance relates to handle design only and does not imply full building compliance.
Key Features
- Round corner 162 x 162mm exterior plate with 10mm radius corners - Lockwood Artefact 202 Series
- Cylinder and Lever configuration (Function 01)
- Custom miscellaneous engraving (code P) - customer-specified text or symbol, black gloss infill standard
- Accepts Lockwood 570 Series oval cylinder - 32mm (H) x 18mm (W) - cylinder not included, order separately
- Lever 98 - Artefact 200 Series with lever meets AS1428.1-2009
- Concealed fixings - clean exterior face with no visible screws
- Available in left and right hand
- Designed, assembled and customised in Australia for the Australian market
- Tested to Level D8 (500,000 cycles) - AS4145.2-2008
- Fire rated up to 2 hours - AS1905.1:2005
- Pairs back-to-back with the 203 Series interior plate (round corner)
- Compatible with Lockwood Selector 3770 and Synergy 3570 Series Mortice Locks, latches and push/pull doors
- 25-year mechanical warranty
Suitable Uses
- Commercial, institutional and government entry doors requiring custom engraved room identification
- Doors where standard engraving options (push, pull, male, female, disabled) do not meet specification
- Specialist healthcare, education or public facility applications with custom signage requirements
- Keyed entry doors in architecturally specified projects requiring a round corner plate profile
- Fire-rated door assemblies (when paired with a rated Lockwood mortice lock)
Full Specifications
Item Codes
Dimensions & Technical Drawings
Helpful Tips
- Custom engraving - confirm before ordering: This plate uses a non-standard miscellaneous engraving (code P). The exact engraving text or symbol must be confirmed with us before placing your order. Once manufactured, the plate cannot be returned.
- Standard engraving alternatives: If a standard engraving is sufficient - push, pull, male, female, disabled or unisex symbol - a standard code variant (A-G outlined or R-X solid infill) may be available and is preferable for lead time certainty. Contact us to discuss.
- Cylinder not included: This plate accepts a Lockwood 570 Series oval cylinder (32mm H x 18mm W) but the cylinder is not supplied - order it separately to suit your key system.
- Exterior plate - pairs with 203 Series: This is the outside face plate. It must be paired with a 203 Series interior plate (round corner) - not a 201 Series (square corner).
- Concealed fixings: This plate uses concealed fixing studs. The paired interior 203 plate must use visible fixings - confirm this when ordering the interior plate.
- Handing: Determined by which side the hinges are on when facing the door from outside. Left hand = hinges on the left.
- 202 vs 200 Series: The 202 Series has 10mm radius round corners. If square corners are required, refer to the equivalent 200 Series plate.
- Thick doors: For doors 45-55mm, order long fixing screws SP2000-208 separately.
- Non-returnable: Custom engraved items cannot be returned under any circumstances - confirm all details before placing your order.
Lockwood branded products purchased new in Australia from authorised resellers are covered against defects in materials and workmanship for:
- Mechanical components: 25 years
- Electrical and electronic components: 2 years (excluding batteries)
- Everbrass: 25 years
- Stainless Steel, Chrome & Anodised: Up to 10 years
- PVD / VIVID: 10 years
- Symmetry: 5 years
- Decorative finishes (Bronze, Antique, Powdercoat): Typically 2 years
Lockwood 200/202 Series Handle Catalogue
Lockwood Warranty
Lockwood branded products are covered by manufacturer warranties issued by ASSA ABLOY Australia Pty Ltd. Warranty periods vary by product type, with separate cover for mechanical components, electrical and electronic parts, keys, and finishes.
The summary below sets out the standard warranty structure. All warranty claims are handled by Terry's Tradies Pty Ltd and its associated websites, trading names, and subsidiaries. Full terms and exclusions are set out in the official Lockwood warranty document linked at the base of this page.
Warranty Summary
Finish Coverage Guide
- Everbrass finishes: up to 25 years against corrosion, tarnishing and discolouration.
- Stainless steel, polished stainless steel, chrome plating and anodised finishes: typically up to 10 years.
- PVD and VIVID finishes: typically up to 10 years.
- Symmetry range finishes: typically up to 5 years.
- Decorative finishes (Antique Copper, Architectural Bronze, Oil Rubbed Bronze, Aged Brass, Polished Brass, Satin Brass and related variants): typically up to 2 years against corrosion.
- Unlacquered brass finishes naturally age and change appearance over time. This is not considered a defect.
- Tea staining of stainless steel is not covered where the required cleaning and maintenance have not been followed.
How to Make a Claim
- Contact Terry's Tradies Pty Ltd and its associated websites, trading names, and subsidiaries with your proof of original purchase.
- Keep the product securely packed and clearly identified, ready for assessment.
- Where a claim is escalated to the manufacturer, ASSA ABLOY may issue a case number before goods are returned.
- ASSA ABLOY assesses the claim and determines repair, replacement with the same or closest equivalent product, or refund of the purchase price.
Exclusions
- Normal wear and tear.
- Misuse, abuse, accidental damage or use outside published specifications.
- Improper maintenance or failure to follow care instructions.
- Unauthorised modification, repair or use of non-genuine parts.
- Exposure to corrosive environments including coastal air, salt spray, chemicals or pollution.
- Removal, refitment or associated labour charges.
- Products not originally sold in Australia through authorised channels.
These manufacturer warranties apply in addition to your rights under the Australian Consumer Law. Our goods come with guarantees that cannot be excluded under the ACL. You are entitled to a replacement or refund for a major failure and to compensation for any other reasonably foreseeable loss or damage. Where a failure does not amount to a major failure, you are entitled to have the goods repaired or replaced.
