Lockwood 202 Exterior Round Corner Plate - Dual Cylinder | Satin Stainless Steel
The Lockwood 202 Series Exterior Plate with Dual Cylinder is part of the distinguished Artefact range of round corner plate door furniture. This exterior plate features two Lockwood 570 Series oval cylinder holes - providing a double-cylinder (keyed both sides) configuration on a single plate. Both cylinders are not included and must be ordered separately.
The dual cylinder configuration is used on high-security applications where keyed access is required from both the exterior and interior face of the door - such as secure storage, high-value areas, or external gates where free egress is not required. Note: Dual cylinder locks can present a fire egress hazard and must only be specified where compliant with NCC requirements and confirmed by the building certifier. No lever, turn snib or engraving. Supplied in Satin Stainless Steel in both left and right hand.
Usually ships in 11 business days
Please confirm fire egress compliance, handing and cylinder compatibility before ordering. Consult your building certifier.
Available Finish Options
Satin Stainless Steel
SS
Available in left and right hand.
Fire Rated
- Fire rated up to 2 hours - AS1905.1:2005. Fire performance is dependent on doorset type and configuration. Compliance is system-based and limited by the FRL of the complete doorset assembly.
Key Features
- Round corner 162 x 162mm exterior plate with 10mm radius corners - Lockwood Artefact 202 Series
- Dual Cylinder (Function 10) - two cylinder holes, keyed access from both sides
- Accepts two Lockwood 570 Series oval cylinders - 32mm (H) x 18mm (W) each. Cylinders not included.
- No lever, turn snib or engraving
- Concealed fixings at 4 points. Supplied in trade pack.
- Tested to Level D8 (500,000 cycles) - AS4145.2-2008. Fire rated to 2 hours - AS1905.1:2005
- Pairs back-to-back with the 203 Series interior plate (round corner). 25-year mechanical warranty.
- Egress restriction: key required to exit from interior - confirm NCC fire egress compliance
Suitable Uses
- High-security applications requiring keyed access from both sides of the door - where NCC fire egress requirements are confirmed as met
- Secure storage, high-value areas and external gates not subject to fire egress requirements
- Applications where both interior and exterior cylinder keying is required by the security specification
Full Specifications
Item Codes
Dimensions & Technical Drawings
Helpful Tips
- Egress safety - critical: A dual cylinder lock restricts interior egress to key holders only. This is a fire safety issue. Confirm compliance with NCC Section D (egress) and AS1905.1 before specifying. The building certifier must confirm this configuration is appropriate.
- Both cylinders not included: Order two Lockwood 570 Series oval cylinders separately to complete the installation.
- Key management: Ensure key availability for all occupants who may need to exit in an emergency, or specify compliant thumb-turn interior cylinder alternatives if your certifier permits.
- Exterior plate - pairs with 203 Series: This is the outside face plate. It must be paired with a 203 Series interior plate (round corner) - not a 201 Series. The interior plate must use visible fixings.
- Handing: Determined by which side the hinges are on when facing the door from outside. Left hand = hinges on the left.
- 202 vs 200 Series: The 202 Series has 10mm radius round corners. For square corners refer to the equivalent 200 Series plate.
- Thick doors: For doors 45-55mm, order long fixing screws SP2000-208 separately.
- Non-returnable: Confirm finish and handing before ordering - this item cannot be returned once purchased.
Mechanical: 25 years. Electrical/electronic: 2 years (excl. batteries).
- Everbrass: 25 years
- Stainless Steel, Chrome & Anodised: Up to 10 years
- PVD / VIVID: 10 years
- Symmetry: 5 years
- Decorative finishes (Bronze, Antique, Powdercoat): Typically 2 years
Lockwood 200/202 Series Handle Catalogue
Lockwood Warranty Overview
Lockwood branded products are covered by manufacturer warranties issued by ASSA ABLOY Australia Pty Ltd. Warranty periods vary depending on product type, mechanical components, electrical elements, and finish category.
This overview summarises the structure of Lockwood warranty coverage. Full terms, exclusions and claim procedures are set out in the official Lockwood Warranty document.
Warranty Periods Summary
Finish Coverage Guide
- Everbrass finishes: up to 25 years against corrosion, tarnishing and discolouration.
- Stainless steel, polished stainless steel, chrome plating and anodised finishes: typically up to 10 years.
- Decorative finishes including Antique Copper, Architectural Bronze, Oil Rubbed Bronze, Aged Brass, Polished Brass, Satin Brass and related variants: typically up to 2 years against corrosion.
- Unlacquered brass finishes will naturally age and change appearance over time. This is not considered a defect.
- Tea staining of stainless steel is not covered where cleaning and maintenance have not been followed.
What the Warranty Covers
- Defects in material and workmanship during the applicable warranty period.
- Assessment by ASSA ABLOY to determine repair, replacement with the same or closest equivalent product, or refund of purchase price.
Common Exclusions
- Normal wear and tear.
- Misuse, abuse, accidental damage or use outside published specifications.
- Improper maintenance or failure to follow care instructions.
- Unauthorised modification, repair or use of non-genuine parts.
- Exposure to corrosive environments including coastal air, salt spray, chemicals or pollution.
- Removal, refitment or associated labour charges.
- Products not originally sold in Australia through authorised channels.
Warranty Claim Process
- Retain proof of original purchase.
- Return the product through the original place of purchase where applicable.
- If claiming directly, obtain a case number before returning goods.
- Products must be securely packed and clearly identified.
- Warranty assessment determines repair, replacement or refund.
Australian Consumer Law
Lockwood warranties operate in addition to rights available under the Australian Consumer Law. Goods come with guarantees that cannot be excluded. Customers may be entitled to a replacement or refund for a major failure and compensation for reasonably foreseeable loss or damage.
Where a product fails to meet acceptable quality standards and the failure does not amount to a major failure, the customer is entitled to repair or replacement.
