Lockwood 202 Exterior Round Corner Plate - Turnknob & Lever 96 | Satin Stainless Steel
The Lockwood 202 Series Exterior Plate with Turnknob and Lever 96 is part of the distinguished Artefact range of round corner plate door furniture. This exterior plate combines a turnknob with a DDA-compliant Lever 96 for lever-operated exterior entry. The turnknob provides an additional means of operating the latch from outside, alongside the lever - no cylinder or key is required.
This configuration is suited to doors where both a lever and a turn-operated snib are required on the exterior face without keyed access. No engraving. Supplied in Satin Stainless Steel in both left and right hand. The plate pairs back-to-back with the 203 Series interior plate (round corner).
Usually ships in 11 business days
Please confirm handing and suitability before ordering.
Available Finish Options
Satin Stainless Steel
SS
Available in left and right hand.
Fire Rated
- Fire rated up to 2 hours - AS1905.1:2005. Fire performance is dependent on doorset type and configuration. Compliance is system-based and limited by the FRL of the complete doorset assembly.
Disability Act Compliance (DDA)
- The Artefact 200 Series with lever meets the requirements of AS1428.1-2009, Design for Access and Mobility.
- Suitable for applications requiring DDA-compliant door hardware under the BCA. Lever compliance relates to handle design only and does not imply full building compliance.
Key Features
- Round corner 162 x 162mm exterior plate with 10mm radius corners - Lockwood Artefact 202 Series
- Turnknob and Lever configuration (Function 04)
- Lever 96 - AS1428.1-2009 compliant accessible lever for exterior entry
- Turnknob - additional exterior turn operation without a key
- No cylinder and no engraving. Concealed fixings at 4 points. Supplied in trade pack.
- Tested to Level D8 (500,000 cycles) - AS4145.2-2008. Fire rated to 2 hours - AS1905.1:2005
- Pairs back-to-back with the 203 Series interior plate (round corner). 25-year mechanical warranty.
Suitable Uses
- Exterior entry doors requiring both lever entry and a turn-operated snib on the exterior without keyed access
- DDA-compliant accessible entry doors with additional turn operation
- Fire-rated door assemblies (when paired with a rated Lockwood mortice lock)
Full Specifications
Item Codes
Dimensions & Technical Drawings
Helpful Tips
- No cylinder - unkeyed access: Both the lever and the turnknob operate without a key. If keyed access is required, specify the Cylinder and Lever variant (20201NA/96).
- Turnknob vs Emergency Turn: This is a standard turnknob (Function 04). If an emergency override is required refer to Emergency Turn and Lever variants (Function 03 or 14).
- Exterior plate - pairs with 203 Series: This is the outside face plate. It must be paired with a 203 Series interior plate (round corner) - not a 201 Series. The interior plate must use visible fixings.
- Handing: Determined by which side the hinges are on when facing the door from outside. Left hand = hinges on the left.
- 202 vs 200 Series: The 202 Series has 10mm radius round corners. For square corners refer to the equivalent 200 Series plate.
- Thick doors: For doors 45-55mm, order long fixing screws SP2000-208 separately.
- Non-returnable: Confirm finish and handing before ordering - this item cannot be returned once purchased.
Mechanical: 25 years. Electrical/electronic: 2 years (excl. batteries).
- Everbrass: 25 years
- Stainless Steel, Chrome & Anodised: Up to 10 years
- PVD / VIVID: 10 years
- Symmetry: 5 years
- Decorative finishes (Bronze, Antique, Powdercoat): Typically 2 years
Lockwood 200/202 Series Handle Catalogue
Lockwood Warranty Overview
Lockwood branded products are covered by manufacturer warranties issued by ASSA ABLOY Australia Pty Ltd. Warranty periods vary depending on product type, mechanical components, electrical elements, and finish category.
This overview summarises the structure of Lockwood warranty coverage. Full terms, exclusions and claim procedures are set out in the official Lockwood Warranty document.
Warranty Periods Summary
Finish Coverage Guide
- Everbrass finishes: up to 25 years against corrosion, tarnishing and discolouration.
- Stainless steel, polished stainless steel, chrome plating and anodised finishes: typically up to 10 years.
- Decorative finishes including Antique Copper, Architectural Bronze, Oil Rubbed Bronze, Aged Brass, Polished Brass, Satin Brass and related variants: typically up to 2 years against corrosion.
- Unlacquered brass finishes will naturally age and change appearance over time. This is not considered a defect.
- Tea staining of stainless steel is not covered where cleaning and maintenance have not been followed.
What the Warranty Covers
- Defects in material and workmanship during the applicable warranty period.
- Assessment by ASSA ABLOY to determine repair, replacement with the same or closest equivalent product, or refund of purchase price.
Common Exclusions
- Normal wear and tear.
- Misuse, abuse, accidental damage or use outside published specifications.
- Improper maintenance or failure to follow care instructions.
- Unauthorised modification, repair or use of non-genuine parts.
- Exposure to corrosive environments including coastal air, salt spray, chemicals or pollution.
- Removal, refitment or associated labour charges.
- Products not originally sold in Australia through authorised channels.
Warranty Claim Process
- Retain proof of original purchase.
- Return the product through the original place of purchase where applicable.
- If claiming directly, obtain a case number before returning goods.
- Products must be securely packed and clearly identified.
- Warranty assessment determines repair, replacement or refund.
Australian Consumer Law
Lockwood warranties operate in addition to rights available under the Australian Consumer Law. Goods come with guarantees that cannot be excluded. Customers may be entitled to a replacement or refund for a major failure and compensation for reasonably foreseeable loss or damage.
Where a product fails to meet acceptable quality standards and the failure does not amount to a major failure, the customer is entitled to repair or replacement.
