Lockwood 202 Exterior Round Corner Plate - Privacy Indicating Turnknob & Lever 96 | Synergy 3570 Series | Satin Stainless Steel
The Lockwood 202 Series Exterior Plate with Privacy Indicating Turnknob and Lever 96 is part of the distinguished Artefact range of round corner plate door furniture - designed, assembled and customised in Australia for the Australian market. This exterior plate is designed for use with the Lockwood Synergy 3570 Series Mortice Lock and combines a privacy indicating turnknob with a DDA-compliant Lever 96 for lever-operated exterior entry.
The privacy indicating turnknob displays occupied or vacant status from the outside when the inside occupant engages the turn snib. Unlike the emergency turn variant (Function 14), this turnknob configuration does not include an emergency release from the outside - exterior entry is via Lever 96 and the associated lock only. This makes it appropriate for privacy amenity door applications where occupancy indication is required but external override access is managed through the key system rather than a coin-slot emergency release.
The 202 Series features the same 162 x 162mm plate profile as the 200 Series but with 10mm radius corners. The plate pairs back-to-back with the 203 Series interior plate (round corner). Supplied in Satin Stainless Steel in both left and right hand.
Usually ships in 11 business days
This product is a special order item and cannot be returned. Please confirm lock series compatibility, handing and suitability before ordering.
Finish
Satin Stainless Steel
SS
Available in left and right hand. Single finish option for this configuration.
Fire Rated
- Tested up to 2 hours with a fire rated Lockwood mortice lock on fire door assemblies in accordance with AS1905.1:2005 (Fire Resistant Doorsets).
- Fire performance is dependent on doorset type and configuration.
- Fire compliance is system-based and limited by the Fire Resistance Level of the complete doorset assembly.
Disability Act Compliance (DDA)
- Lever 96 meets the requirements of AS1428.1-2009, Design for Access and Mobility.
- Suitable for applications requiring DDA-compliant door hardware under the BCA.
- Lever compliance relates to handle design only and does not imply full building compliance.
Key Features
- Round corner 162 x 162mm exterior plate with 10mm radius corners - Lockwood Artefact 202 Series
- Privacy Indicating Turnknob and Lever configuration (Function 16)
- Privacy indicating turnknob - displays occupied/vacant status from exterior when inside turn snib is engaged
- No emergency release - exterior entry via Lever 96 and associated lock only
- Lever 96 - AS1428.1-2009 compliant accessible lever for exterior entry
- Specifically designated for use with the Lockwood Synergy 3570 Series Mortice Lock (cylinder code N)
- No engraving - clean unadorned plate face
- Concealed fixings - clean exterior face with no visible screws
- Available in left and right hand
- Designed, assembled and customised in Australia for the Australian market
- Tested to Level D8 (500,000 cycles) - AS4145.2-2008
- Fire rated up to 2 hours - AS1905.1:2005
- Pairs back-to-back with the 203 Series interior plate (round corner)
- 25-year mechanical warranty
Suitable Uses
- Privacy amenity doors where occupancy indication is required but external override access is managed through the key system
- Bathroom, ensuite and amenity doors in commercial buildings with a Lockwood Synergy 3570 Series mortice lock
- Applications where a coin-slot emergency release is not required or appropriate
- Aged care, healthcare, education and institutional facilities paired with 3570 Series lock systems
- Fire-rated door assemblies (when paired with a rated Lockwood Synergy 3570 mortice lock)
- Architecturally specified projects requiring a round corner stainless steel plate profile
Full Specifications
Item Codes
Dimensions & Technical Drawings
Helpful Tips
- Synergy 3570 Series lock only: This plate uses cylinder code N, designating it for the Lockwood Synergy 3570 Series Mortice Lock. If you are using a Selector 3770 Series lock, specify the NS variant (item code 20216NS/96) instead - do not order this SKU for a 3770 Series installation.
- Turnknob vs Emergency Turn - critical distinction: Function 16 (this plate) uses a privacy indicating turnknob - it shows occupied/vacant but has no emergency release from the outside. If an emergency release is required, specify Function 14 (Privacy Indicating Emergency Turn and Lever 96, item code 20214NN/96). Consult your building certifier if you are unsure which is appropriate for your accessible amenity application.
- Exterior plate - pairs with 203 Series: This is the outside face plate. It must be paired with a 203 Series interior plate (round corner) - not a 201 Series (square corner).
- Concealed fixings: This plate uses concealed fixing studs. The paired interior 203 plate must use visible fixings - confirm this when ordering the interior plate.
- Handing: Determined by which side the hinges are on when facing the door from outside. Left hand = hinges on the left.
- Thick doors: For doors 45-55mm, order long fixing screws SP2000-208 separately.
- Non-returnable: Confirm lock series compatibility and handing before ordering - this item cannot be returned once purchased.
Lockwood branded products purchased new in Australia from authorised resellers are covered against defects in materials and workmanship for:
- Mechanical components: 25 years
- Electrical and electronic components: 2 years (excluding batteries)
- Everbrass: 25 years
- Stainless Steel, Chrome & Anodised: Up to 10 years
- PVD / VIVID: 10 years
- Symmetry: 5 years
- Decorative finishes (Bronze, Antique, Powdercoat): Typically 2 years
Lockwood 200/202 Series Handle Catalogue
Lockwood Warranty Overview
Lockwood branded products are covered by manufacturer warranties issued by ASSA ABLOY Australia Pty Ltd. Warranty periods vary depending on product type, mechanical components, electrical elements, and finish category.
This overview summarises the structure of Lockwood warranty coverage. Full terms, exclusions and claim procedures are set out in the official Lockwood Warranty document.
Warranty Periods Summary
Finish Coverage Guide
- Everbrass finishes: up to 25 years against corrosion, tarnishing and discolouration.
- Stainless steel, polished stainless steel, chrome plating and anodised finishes: typically up to 10 years.
- Decorative finishes including Antique Copper, Architectural Bronze, Oil Rubbed Bronze, Aged Brass, Polished Brass, Satin Brass and related variants: typically up to 2 years against corrosion.
- Unlacquered brass finishes will naturally age and change appearance over time. This is not considered a defect.
- Tea staining of stainless steel is not covered where cleaning and maintenance have not been followed.
What the Warranty Covers
- Defects in material and workmanship during the applicable warranty period.
- Assessment by ASSA ABLOY to determine repair, replacement with the same or closest equivalent product, or refund of purchase price.
Common Exclusions
- Normal wear and tear.
- Misuse, abuse, accidental damage or use outside published specifications.
- Improper maintenance or failure to follow care instructions.
- Unauthorised modification, repair or use of non-genuine parts.
- Exposure to corrosive environments including coastal air, salt spray, chemicals or pollution.
- Removal, refitment or associated labour charges.
- Products not originally sold in Australia through authorised channels.
Warranty Claim Process
- Retain proof of original purchase.
- Return the product through the original place of purchase where applicable.
- If claiming directly, obtain a case number before returning goods.
- Products must be securely packed and clearly identified.
- Warranty assessment determines repair, replacement or refund.
Australian Consumer Law
Lockwood warranties operate in addition to rights available under the Australian Consumer Law. Goods come with guarantees that cannot be excluded. Customers may be entitled to a replacement or refund for a major failure and compensation for reasonably foreseeable loss or damage.
Where a product fails to meet acceptable quality standards and the failure does not amount to a major failure, the customer is entitled to repair or replacement.
