Lockwood 202 Exterior Round Corner Plate - DDA Symbol, Privacy Indicating Emergency Turn & Lever 96 | Right Hand | Satin Stainless Steel
The Lockwood 202 Series Exterior Plate with DDA Symbol, Privacy Indicating Emergency Turn and Lever 96 is a purpose-built accessible amenity door plate, combining three critical elements in a single exterior plate: the internationally recognised disability/accessibility symbol engraving (outlined infill, black gloss), a privacy indicating emergency turn showing occupied/vacant status from the outside, and a DDA-compliant Lever 96 for accessible lever-operated entry.
This plate is specifically designed for the exterior face of accessible bathrooms, ensuites, and amenity facilities in compliant commercial and public buildings. The disability symbol engraving clearly identifies the room as an accessible facility, the privacy indicator advises whether the room is in use, and the emergency turn allows a carer or staff member to open the door from outside in an emergency without damaging the furniture. Lever 96 provides compliant lever-operated access in accordance with AS1428.1-2009.
The 202 Series features the same 162 x 162mm plate profile as the 200 Series but with 10mm radius corners. This plate pairs back-to-back with the 203 Series interior plate (round corner) and is compatible with Lockwood Selector 3770 and Synergy 3570 Series Mortice Locks. Supplied in Satin Stainless Steel, Right Hand.
Estimated Warehouse Dispatch
Usually ships in 11 business days
Usually ships in 11 business days
Special Order - Non-Returnable Item
This product is a special order item and cannot be returned. Please confirm handing and suitability before ordering.
This product is a special order item and cannot be returned. Please confirm handing and suitability before ordering.
Finish
Satin Stainless Steel
SS - Right Hand
Single finish and handing option for this SKU. Finish selection does not affect functionality or compliance.
Fire Rated
- Tested up to 2 hours with a fire rated Lockwood mortice lock on fire door assemblies in accordance with AS1905.1:2005 (Fire Resistant Doorsets).
- Fire performance is dependent on doorset type and configuration.
- Fire compliance is system-based and limited by the Fire Resistance Level of the complete doorset assembly.
Disability Act Compliance (DDA)
- Lever 96 meets the requirements of AS1428.1-2009, Design for Access and Mobility.
- The disability/accessibility symbol engraving identifies the facility as accessible in accordance with signage requirements for compliant buildings.
- The privacy indicating emergency turn supports accessible facility management - carers and staff can determine occupancy status and enter in an emergency without specialist tools.
- Lever and engraving compliance relates to hardware design only and does not imply full building compliance - confirm with your building certifier.
Key Features
- Round corner 162 x 162mm exterior plate with 10mm radius corners - Lockwood Artefact 202 Series
- Privacy Indicating Emergency Turn and Lever configuration (Function 14)
- Disability/accessibility symbol engraving - outlined infill (E), black gloss standard
- Privacy indicating emergency turn - displays occupied/vacant status from the exterior
- Emergency release function - allows outside entry in an emergency without damaging the furniture
- Lever 96 - AS1428.1-2009 compliant accessible lever for entry
- No cylinder - lever and turn snib operation only
- Right Hand
- Concealed fixings - clean exterior face with no visible screws
- Designed, assembled and customised in Australia for the Australian market
- Tested to Level D8 (500,000 cycles) - AS4145.2-2008
- Fire rated up to 2 hours - AS1905.1:2005
- Pairs back-to-back with the 203 Series interior plate (round corner)
- Compatible with Lockwood Selector 3770 and Synergy 3570 Series Mortice Locks, latches and push/pull doors
- 25-year mechanical warranty
Suitable Uses
- Accessible bathroom, ensuite and amenity room doors in compliant commercial and public buildings
- Exterior face of privacy doors where DDA symbol identification, occupancy indication and emergency access are all required
- Aged care, healthcare, education, hospitality and government facilities
- Any building requiring compliant accessible amenity signage integrated into door hardware
- Fire-rated door assemblies (when paired with a rated Lockwood mortice lock)
- Architecturally specified accessible fitouts requiring a round corner plate profile in stainless steel
Full Specifications
Dimensions & Technical Drawings
Plate dimension drawing showing 162 x 162mm round corner profile with 10mm radius corners and cross-section details.
Standards and compliance reference - fire rating, Level D8 cycling test, DDA/AS1428.1-2009 and anti-corrosion.
Functions diagram showing the full range of compatible plate configurations including privacy indicating emergency turn and engraving options for the 202/203 Series.
Part number builder and ordering procedure for the 200/202 Series - plate type, function, engraving, cylinder, lever, handing and finish codes.
Helpful Tips
- Exterior plate - pairs with 203 Series: This is the outside face plate. It must be paired with a 203 Series interior plate (round corner) - not a 201 Series (square corner). The interior plate for an accessible amenity door should include a disabled turn snib and lever - confirm the correct 203 Series variant when ordering.
- How the privacy indicator works: When the inside occupant engages the turn snib, the indicator on this exterior plate changes to show the room is occupied. When the snib is released it returns to vacant - no key is required to read the status.
- Emergency release: The exterior plate allows a carer or staff member to open the door from outside in an emergency using a coin, flat tool or dedicated release key, without damaging the furniture.
- Engraving infill - outlined vs solid: This plate uses outlined infill engraving (code E) - the disability symbol has an outlined border rather than a fully solid fill. For full solid infill, specify engraving code V instead.
- Right Hand only: This SKU is right hand only. If left hand is required, contact us to confirm availability.
- Handing: Right hand = hinges on the right when facing the door from outside.
- Concealed fixings: This plate uses concealed fixing studs. The paired interior 203 plate must use visible fixings - confirm this when ordering the interior plate.
- Confirm full building compliance separately: Hardware compliance with AS1428.1-2009 relates to lever and handle design only. Full accessible building compliance requires assessment by a building certifier or access consultant.
- Thick doors: For doors 45-55mm, order long fixing screws SP2000-208 separately.
- Non-returnable: This item cannot be returned once ordered - confirm handing and suitability before purchasing.
Lockwood Warranty (Australia)
Lockwood branded products purchased new in Australia from authorised resellers are covered against defects in materials and workmanship for:
Lockwood branded products purchased new in Australia from authorised resellers are covered against defects in materials and workmanship for:
- Mechanical components: 25 years
- Electrical and electronic components: 2 years (excluding batteries)
Finish Warranty Guide:
- Everbrass: 25 years
- Stainless Steel, Chrome & Anodised: Up to 10 years
- PVD / VIVID: 10 years
- Symmetry: 5 years
- Decorative finishes (Bronze, Antique, Powdercoat): Typically 2 years
Cosmetic finishes, batteries, normal wear and tear, misuse, unauthorised modification, corrosion and labour or freight costs are excluded.
This warranty operates in addition to rights available under the Australian Consumer Law.
Download PDF Resources
Lockwood 200/202 Series Handle Catalogue
Lockwood 200/202 Series Handle Catalogue
Lockwood Warranty
Lockwood branded products are covered by manufacturer warranties issued by ASSA ABLOY Australia Pty Ltd. Warranty periods vary by product type, with separate cover for mechanical components, electrical and electronic parts, keys, and finishes.
The summary below sets out the standard warranty structure. All warranty claims are handled by Terry's Tradies Pty Ltd and its associated websites, trading names, and subsidiaries. Full terms and exclusions are set out in the official Lockwood warranty document linked at the base of this page.
Warranty Summary
Finish Coverage Guide
- Everbrass finishes: up to 25 years against corrosion, tarnishing and discolouration.
- Stainless steel, polished stainless steel, chrome plating and anodised finishes: typically up to 10 years.
- PVD and VIVID finishes: typically up to 10 years.
- Symmetry range finishes: typically up to 5 years.
- Decorative finishes (Antique Copper, Architectural Bronze, Oil Rubbed Bronze, Aged Brass, Polished Brass, Satin Brass and related variants): typically up to 2 years against corrosion.
- Unlacquered brass finishes naturally age and change appearance over time. This is not considered a defect.
- Tea staining of stainless steel is not covered where the required cleaning and maintenance have not been followed.
How to Make a Claim
For full returns and warranty claim procedures, visit our Returns & Warranty page - this is kept up to date and is the authoritative reference for current claim steps.
- Contact Terry's Tradies Pty Ltd and its associated websites, trading names, and subsidiaries with your proof of original purchase.
- Keep the product securely packed and clearly identified, ready for assessment.
- Where a claim is escalated to the manufacturer, ASSA ABLOY may issue a case number before goods are returned.
- ASSA ABLOY assesses the claim and determines repair, replacement with the same or closest equivalent product, or refund of the purchase price.
Exclusions
- Normal wear and tear.
- Misuse, abuse, accidental damage or use outside published specifications.
- Improper maintenance or failure to follow care instructions.
- Unauthorised modification, repair or use of non-genuine parts.
- Exposure to corrosive environments including coastal air, salt spray, chemicals or pollution.
- Removal, refitment or associated labour charges.
- Products not originally sold in Australia through authorised channels.
Australian Consumer Law
These manufacturer warranties apply in addition to your rights under the Australian Consumer Law. Our goods come with guarantees that cannot be excluded under the ACL. You are entitled to a replacement or refund for a major failure and to compensation for any other reasonably foreseeable loss or damage. Where a failure does not amount to a major failure, you are entitled to have the goods repaired or replaced.
These manufacturer warranties apply in addition to your rights under the Australian Consumer Law. Our goods come with guarantees that cannot be excluded under the ACL. You are entitled to a replacement or refund for a major failure and to compensation for any other reasonably foreseeable loss or damage. Where a failure does not amount to a major failure, you are entitled to have the goods repaired or replaced.
