Lockwood Right Hand Offset 3 Degree Extended Spindle +5mm - ST80-60-05RH
The Lockwood ST80-60-05RH Extended Spindle is a right hand offset 3 degree extended spindle for Lockwood floor closer applications. It provides +5mm additional clearance where a small increase in door to floor clearance is required.
This spindle is commonly used in floor spring closer maintenance, retrofit work, and installations where thresholds or finished floor levels require a minor clearance adjustment. The right hand configuration must match the door setup for correct pivot alignment.
The ST80-60-05RH is part of the Lockwood extended spindle range and is commonly specified in Australian commercial door hardware servicing.
Key Features
- Right hand offset 3 degree extended spindle insert
- Provides +5mm additional clearance
- Used with Lockwood floor closer applications
- Suitable for minor door to floor clearance adjustment
- Useful for threshold and finished floor level corrections
- Supports correct pivot alignment when correctly selected
Suitable Uses
- Lockwood floor closer servicing
- Commercial aluminium door systems
- Minor threshold clearance applications
- Retrofit door hardware work
- Finished floor height adjustment where +5mm clearance is required
Full Specifications
Dimensions
Item Code Family
Frequently Asked Questions
Is this spindle suitable for all Lockwood floor closers?
No. Compatibility should be checked against the installed Lockwood floor closer or pivot system before ordering.
When would a +5mm extended spindle be used?
It is used where only a small increase in clearance is required, often after minor flooring or threshold changes.
What is a common installation mistake to avoid?
Do not select by extension length only. Handing, offset direction, pivot alignment and finished floor level must all be checked.
Additional Information
- Extended spindles are commonly selected when the finished floor height changes after the original floor closer installation.
- A +5mm spindle is typically used for small correction work rather than major floor build-up changes.
- Correct handing is important because offset spindle geometry affects pivot alignment.
- This type of spare part is commonly used in Australian commercial door maintenance and retrofit projects.
Lockwood branded products purchased new in Australia from authorised resellers are covered against defects in materials and workmanship for:
- Mechanical components: 25 years
- Electrical and electronic components: 2 years (excluding batteries)
Lockwood Floor Closers Catalogue
Lockwood Floor Closers Catalogue
Lockwood Warranty
Lockwood branded products are covered by manufacturer warranties issued by ASSA ABLOY Australia Pty Ltd. Warranty periods vary by product type, with separate cover for mechanical components, electrical and electronic parts, keys, and finishes.
The summary below sets out the standard warranty structure. All warranty claims are handled by Terry's Tradies Pty Ltd and its associated websites, trading names, and subsidiaries. Full terms and exclusions are set out in the official Lockwood warranty document linked at the base of this page.
Warranty Summary
Finish Coverage Guide
- Everbrass finishes: up to 25 years against corrosion, tarnishing and discolouration.
- Stainless steel, polished stainless steel, chrome plating and anodised finishes: typically up to 10 years.
- PVD and VIVID finishes: typically up to 10 years.
- Symmetry range finishes: typically up to 5 years.
- Decorative finishes (Antique Copper, Architectural Bronze, Oil Rubbed Bronze, Aged Brass, Polished Brass, Satin Brass and related variants): typically up to 2 years against corrosion.
- Unlacquered brass finishes naturally age and change appearance over time. This is not considered a defect.
- Tea staining of stainless steel is not covered where the required cleaning and maintenance have not been followed.
How to Make a Claim
- Contact Terry's Tradies Pty Ltd and its associated websites, trading names, and subsidiaries with your proof of original purchase.
- Keep the product securely packed and clearly identified, ready for assessment.
- Where a claim is escalated to the manufacturer, ASSA ABLOY may issue a case number before goods are returned.
- ASSA ABLOY assesses the claim and determines repair, replacement with the same or closest equivalent product, or refund of the purchase price.
Exclusions
- Normal wear and tear.
- Misuse, abuse, accidental damage or use outside published specifications.
- Improper maintenance or failure to follow care instructions.
- Unauthorised modification, repair or use of non-genuine parts.
- Exposure to corrosive environments including coastal air, salt spray, chemicals or pollution.
- Removal, refitment or associated labour charges.
- Products not originally sold in Australia through authorised channels.
These manufacturer warranties apply in addition to your rights under the Australian Consumer Law. Our goods come with guarantees that cannot be excluded under the ACL. You are entitled to a replacement or refund for a major failure and to compensation for any other reasonably foreseeable loss or damage. Where a failure does not amount to a major failure, you are entitled to have the goods repaired or replaced.
