Lockwood Left Hand Offset 3 Degree Extended Spindle +5mm - ST80-60-05LH
The Lockwood ST80-60-05LH Extended Spindle is a left hand offset 3 degree extended spindle for Lockwood floor closer applications. It provides +5mm additional clearance where a small increase in door to floor clearance is required.
This spindle is commonly used in floor spring closer maintenance, retrofit work, and installations where thresholds or finished floor levels require a minor clearance adjustment. The left hand configuration must match the door setup for correct pivot alignment.
The ST80-60-05LH is part of the Lockwood extended spindle range and is commonly specified in Australian commercial door hardware servicing.
Typically ships in 2-3 business days.
Key Features
- Left hand offset 3 degree extended spindle insert
- Provides +5mm additional clearance
- Used with Lockwood floor closer applications
- Suitable for minor door to floor clearance adjustment
- Useful for threshold and finished floor level corrections
- Supports correct pivot alignment when correctly selected
Suitable Uses
- Lockwood floor closer servicing
- Commercial aluminium door systems
- Minor threshold clearance applications
- Retrofit door hardware work
- Finished floor height adjustment where +5mm clearance is required
Full Specifications
Dimensions
Item Code Family
Frequently Asked Questions
Is this spindle suitable for all Lockwood floor closers?
No. Compatibility should be checked against the installed Lockwood floor closer or pivot system before ordering.
When would a +5mm extended spindle be used?
It is used where only a small increase in clearance is required, often after minor flooring or threshold changes.
What is a common installation mistake to avoid?
Do not select by extension length only. Handing, offset direction, pivot alignment and finished floor level must all be checked.
Additional Information
- Extended spindles are commonly selected when the finished floor height changes after the original floor closer installation.
- A +5mm spindle is typically used for small correction work rather than major floor build-up changes.
- Correct handing is important because offset spindle geometry affects pivot alignment.
- This type of spare part is commonly used in Australian commercial door maintenance and retrofit projects.
Lockwood branded products purchased new in Australia from authorised resellers are covered against defects in materials and workmanship for:
- Mechanical components: 25 years
- Electrical and electronic components: 2 years (excluding batteries)
Lockwood Floor Closers Catalogue
Lockwood Floor Closers Catalogue
Lockwood Warranty Overview
Lockwood branded products are covered by manufacturer warranties issued by ASSA ABLOY Australia Pty Ltd. Warranty periods vary depending on product type, mechanical components, electrical elements, and finish category.
This overview summarises the structure of Lockwood warranty coverage. Full terms, exclusions and claim procedures are set out in the official Lockwood Warranty document.
Warranty Periods Summary
Finish Coverage Guide
- Everbrass finishes: up to 25 years against corrosion, tarnishing and discolouration.
- Stainless steel, polished stainless steel, chrome plating and anodised finishes: typically up to 10 years.
- Decorative finishes including Antique Copper, Architectural Bronze, Oil Rubbed Bronze, Aged Brass, Polished Brass, Satin Brass and related variants: typically up to 2 years against corrosion.
- Unlacquered brass finishes will naturally age and change appearance over time. This is not considered a defect.
- Tea staining of stainless steel is not covered where cleaning and maintenance have not been followed.
What the Warranty Covers
- Defects in material and workmanship during the applicable warranty period.
- Assessment by ASSA ABLOY to determine repair, replacement with the same or closest equivalent product, or refund of purchase price.
Common Exclusions
- Normal wear and tear.
- Misuse, abuse, accidental damage or use outside published specifications.
- Improper maintenance or failure to follow care instructions.
- Unauthorised modification, repair or use of non-genuine parts.
- Exposure to corrosive environments including coastal air, salt spray, chemicals or pollution.
- Removal, refitment or associated labour charges.
- Products not originally sold in Australia through authorised channels.
Warranty Claim Process
- Retain proof of original purchase.
- Return the product through the original place of purchase where applicable.
- If claiming directly, obtain a case number before returning goods.
- Products must be securely packed and clearly identified.
- Warranty assessment determines repair, replacement or refund.
Australian Consumer Law
Lockwood warranties operate in addition to rights available under the Australian Consumer Law. Goods come with guarantees that cannot be excluded. Customers may be entitled to a replacement or refund for a major failure and compensation for reasonably foreseeable loss or damage.
Where a product fails to meet acceptable quality standards and the failure does not amount to a major failure, the customer is entitled to repair or replacement.
