Lockwood Right Hand Offset 3 Degree Extended Spindle +25mm - ST80-60-25RH
The Lockwood ST80-60-25RH Extended Spindle is a right hand offset pivot insert designed for Lockwood ST8011 Series floor spring closers and pivot kits. It provides an additional +25mm clearance to accommodate floor conditions where extra space is required between the door and finished floor level.
This extended spindle is typically used in installations with thresholds, carpet, or raised flooring where the standard spindle does not provide sufficient clearance. The 3 degree offset and right hand configuration must match the door orientation to ensure proper pivot alignment and smooth operation.
Typically ships in 2-3 business days
Key Features
- Right hand offset 3 degree extended spindle insert
- Provides +25mm additional clearance
- Suits Lockwood ST8011 Series floor spring closers and pivot kits
- Interchangeable pivot insert for floor spring systems
- Designed to accommodate thresholds, carpet, and raised floor finishes
- Supports correct door alignment and pivot geometry
Suitable Uses
- Lockwood ST8011 floor spring closer installations
- Commercial aluminium door systems
- Threshold and raised floor applications
- Carpeted floor environments
- Retrofit situations requiring additional door clearance
Full Specifications
Item Code Family
Frequently Asked Questions
Is this compatible with all Lockwood floor closers?
No. It is designed specifically for Lockwood ST8011 Series floor spring closers and pivot systems.
When should a +25mm spindle be used?
It is used when additional clearance is required due to flooring build-up such as carpet or thresholds.
What is a common mistake when selecting spindles?
Incorrect handing or extension selection can lead to misalignment and improper door operation.
Additional Information
- Extended spindle selection is based on total floor build-up and required clearance.
- Used frequently in retrofit applications where flooring has been modified.
- Handing must match door orientation to ensure correct pivot alignment.
- Commonly used in Australian commercial door installations.
Lockwood branded products purchased new in Australia from authorised resellers are covered against defects in materials and workmanship for:
- Mechanical components: 25 years
- Electrical and electronic components: 2 years (excluding batteries)
Lockwood Floor Closers Catalogue
Lockwood Floor Closers Catalogue
Lockwood Warranty
Lockwood branded products are covered by manufacturer warranties issued by ASSA ABLOY Australia Pty Ltd. Warranty periods vary by product type, with separate cover for mechanical components, electrical and electronic parts, keys, and finishes.
The summary below sets out the standard warranty structure. All warranty claims are handled by Terry's Tradies Pty Ltd and its associated websites, trading names, and subsidiaries. Full terms and exclusions are set out in the official Lockwood warranty document linked at the base of this page.
Warranty Summary
Finish Coverage Guide
- Everbrass finishes: up to 25 years against corrosion, tarnishing and discolouration.
- Stainless steel, polished stainless steel, chrome plating and anodised finishes: typically up to 10 years.
- PVD and VIVID finishes: typically up to 10 years.
- Symmetry range finishes: typically up to 5 years.
- Decorative finishes (Antique Copper, Architectural Bronze, Oil Rubbed Bronze, Aged Brass, Polished Brass, Satin Brass and related variants): typically up to 2 years against corrosion.
- Unlacquered brass finishes naturally age and change appearance over time. This is not considered a defect.
- Tea staining of stainless steel is not covered where the required cleaning and maintenance have not been followed.
How to Make a Claim
- Contact Terry's Tradies Pty Ltd and its associated websites, trading names, and subsidiaries with your proof of original purchase.
- Keep the product securely packed and clearly identified, ready for assessment.
- Where a claim is escalated to the manufacturer, ASSA ABLOY may issue a case number before goods are returned.
- ASSA ABLOY assesses the claim and determines repair, replacement with the same or closest equivalent product, or refund of the purchase price.
Exclusions
- Normal wear and tear.
- Misuse, abuse, accidental damage or use outside published specifications.
- Improper maintenance or failure to follow care instructions.
- Unauthorised modification, repair or use of non-genuine parts.
- Exposure to corrosive environments including coastal air, salt spray, chemicals or pollution.
- Removal, refitment or associated labour charges.
- Products not originally sold in Australia through authorised channels.
These manufacturer warranties apply in addition to your rights under the Australian Consumer Law. Our goods come with guarantees that cannot be excluded under the ACL. You are entitled to a replacement or refund for a major failure and to compensation for any other reasonably foreseeable loss or damage. Where a failure does not amount to a major failure, you are entitled to have the goods repaired or replaced.
