Lockwood Right Hand Offset 3 Degree Extended Spindle +30mm - ST80-60-30RH
The Lockwood ST80-60-30RH Extended Spindle is a right hand offset pivot insert designed for use with Lockwood ST8011 Series floor spring closers and pivot systems. It provides an additional +30mm spindle extension, allowing installers to achieve correct door clearance in challenging floor conditions.
This extended spindle is commonly used where thresholds, floor finishes, or carpet installations require increased separation between the door leaf and finished floor level. The 3 degree offset configuration supports correct pivot alignment while maintaining smooth door operation.
It forms part of the Lockwood extended spindle range and is intended for accurate adjustment of floor spring pivot geometry in commercial and architectural door installations.
Key Features
- +30mm extended spindle length for increased floor clearance
- Right hand configuration with 3 degree offset geometry
- Designed for Lockwood ST8011 Series floor spring systems
- Helps accommodate thresholds, carpet, and raised floor finishes
- Interchangeable pivot insert for flexible installation adjustment
- Supports accurate door alignment and pivot positioning
Suitable Uses
- Commercial door installations using floor spring closers
- Applications requiring increased door to floor clearance
- Threshold or recessed floor conditions
- Carpeted or finished flooring environments
- Replacement or adjustment of existing pivot spindle height
Full Specifications
Dimensions
Item Code Family
Frequently Asked Questions
Is this product suitable for fire doors?
Answer based on the specific product configuration and compliance.
Does this include all required mounting hardware?
Clarify exactly what is included and what may be required separately.
What is a common installation mistake to avoid?
Provide a practical warning or tip.
Additional Information
- Extended spindles are commonly used in retrofit scenarios where floor levels have changed after original installation.
- Professional installers often measure total floor build-up including adhesive, tile, or carpet underlay before selecting spindle length.
- Incorrect spindle selection is a common cause of door misalignment in floor spring systems.
- This product is typically specified in commercial aluminium door systems across Australian building projects.
Lockwood branded products purchased new in Australia from authorised resellers are covered against defects in materials and workmanship for:
- Mechanical components: 25 years
- Electrical and electronic components: 2 years (excluding batteries)
Lockwood Floor Closers Catalogue
Lockwood Floor Closers Catalogue
Lockwood Warranty Overview
Lockwood branded products are covered by manufacturer warranties issued by ASSA ABLOY Australia Pty Ltd. Warranty periods vary depending on product type, mechanical components, electrical elements, and finish category.
This overview summarises the structure of Lockwood warranty coverage. Full terms, exclusions and claim procedures are set out in the official Lockwood Warranty document.
Warranty Periods Summary
Finish Coverage Guide
- Everbrass finishes: up to 25 years against corrosion, tarnishing and discolouration.
- Stainless steel, polished stainless steel, chrome plating and anodised finishes: typically up to 10 years.
- Decorative finishes including Antique Copper, Architectural Bronze, Oil Rubbed Bronze, Aged Brass, Polished Brass, Satin Brass and related variants: typically up to 2 years against corrosion.
- Unlacquered brass finishes will naturally age and change appearance over time. This is not considered a defect.
- Tea staining of stainless steel is not covered where cleaning and maintenance have not been followed.
What the Warranty Covers
- Defects in material and workmanship during the applicable warranty period.
- Assessment by ASSA ABLOY to determine repair, replacement with the same or closest equivalent product, or refund of purchase price.
Common Exclusions
- Normal wear and tear.
- Misuse, abuse, accidental damage or use outside published specifications.
- Improper maintenance or failure to follow care instructions.
- Unauthorised modification, repair or use of non-genuine parts.
- Exposure to corrosive environments including coastal air, salt spray, chemicals or pollution.
- Removal, refitment or associated labour charges.
- Products not originally sold in Australia through authorised channels.
Warranty Claim Process
- Retain proof of original purchase.
- Return the product through the original place of purchase where applicable.
- If claiming directly, obtain a case number before returning goods.
- Products must be securely packed and clearly identified.
- Warranty assessment determines repair, replacement or refund.
Australian Consumer Law
Lockwood warranties operate in addition to rights available under the Australian Consumer Law. Goods come with guarantees that cannot be excluded. Customers may be entitled to a replacement or refund for a major failure and compensation for reasonably foreseeable loss or damage.
Where a product fails to meet acceptable quality standards and the failure does not amount to a major failure, the customer is entitled to repair or replacement.
