Lockwood Right Hand Offset 3 Degree Extended Spindle +10mm - ST80-60-10RH
The Lockwood ST80-60-10RH Extended Spindle is a right hand offset 3 degree pivot insert designed for Lockwood ST8011 Series floor spring closers and pivot kits. It provides +10mm additional clearance to suit installations where extra space is required between the door and finished floor level.
This extended spindle is typically used in threshold conditions, carpeted floors or retrofit situations where standard spindle height is insufficient. The correct handing and offset must be matched to the door configuration to maintain proper pivot geometry and smooth operation.
Part of the Lockwood ST8011 extended spindle range, this component is widely used in commercial door hardware servicing and installation across Australia.
Key Features
- Right hand offset 3 degree extended spindle
- Provides +10mm additional clearance
- Interchangeable pivot insert for floor spring systems
- Suits Lockwood ST8011 Series floor spring closers and pivot kits
- Designed for threshold, carpet and raised floor conditions
- Maintains correct pivot alignment and door operation
Suitable Uses
- Lockwood ST8011 floor spring installations
- Commercial aluminium door systems
- Threshold clearance applications
- Carpeted and finished floor adjustments
- Retrofit door height correction
Full Specifications
Dimensions
Item Code Family
Frequently Asked Questions
Is this compatible with all floor springs?
It is designed for Lockwood ST8011 Series floor spring closers. Compatibility with other systems is not confirmed.
How do I choose the correct extension size?
The extension should match the required floor clearance and installation geometry. Measure the gap before selecting.
What is a common mistake during installation?
Incorrect handing selection. Always confirm left or right hand configuration before installation.
Additional Information
- Spindle length should be calculated based on floor clearance plus collar height.
- Incorrect spindle selection can affect door closing performance and alignment.
- Commonly used in commercial retrofits where flooring has changed.
- Widely used across Australian commercial door hardware servicing.
Mechanical components: 25 years
Lockwood Floor Closers Catalogue
Lockwood Floor Closers Catalogue
Lockwood Warranty Overview
Lockwood branded products are covered by manufacturer warranties issued by ASSA ABLOY Australia Pty Ltd. Warranty periods vary depending on product type, mechanical components, electrical elements, and finish category.
This overview summarises the structure of Lockwood warranty coverage. Full terms, exclusions and claim procedures are set out in the official Lockwood Warranty document.
Warranty Periods Summary
Finish Coverage Guide
- Everbrass finishes: up to 25 years against corrosion, tarnishing and discolouration.
- Stainless steel, polished stainless steel, chrome plating and anodised finishes: typically up to 10 years.
- Decorative finishes including Antique Copper, Architectural Bronze, Oil Rubbed Bronze, Aged Brass, Polished Brass, Satin Brass and related variants: typically up to 2 years against corrosion.
- Unlacquered brass finishes will naturally age and change appearance over time. This is not considered a defect.
- Tea staining of stainless steel is not covered where cleaning and maintenance have not been followed.
What the Warranty Covers
- Defects in material and workmanship during the applicable warranty period.
- Assessment by ASSA ABLOY to determine repair, replacement with the same or closest equivalent product, or refund of purchase price.
Common Exclusions
- Normal wear and tear.
- Misuse, abuse, accidental damage or use outside published specifications.
- Improper maintenance or failure to follow care instructions.
- Unauthorised modification, repair or use of non-genuine parts.
- Exposure to corrosive environments including coastal air, salt spray, chemicals or pollution.
- Removal, refitment or associated labour charges.
- Products not originally sold in Australia through authorised channels.
Warranty Claim Process
- Retain proof of original purchase.
- Return the product through the original place of purchase where applicable.
- If claiming directly, obtain a case number before returning goods.
- Products must be securely packed and clearly identified.
- Warranty assessment determines repair, replacement or refund.
Australian Consumer Law
Lockwood warranties operate in addition to rights available under the Australian Consumer Law. Goods come with guarantees that cannot be excluded. Customers may be entitled to a replacement or refund for a major failure and compensation for reasonably foreseeable loss or damage.
Where a product fails to meet acceptable quality standards and the failure does not amount to a major failure, the customer is entitled to repair or replacement.
