Lockwood 202 Exterior Round Corner Plate - Push Text Outlined Engraving | Satin Stainless Steel
The Lockwood 202 Series Exterior Plate with Push Text Outlined Engraving is part of the distinguished Artefact range of round corner plate door furniture. This exterior plate features an outlined "PUSH" text engraving (code F) with black gloss infill on a Satin Stainless Steel plate face - providing clear push-side directional instruction for building occupants on pass doors.
The outlined infill engraving (code F) produces "PUSH" text with a black gloss outline and hollow letter interior - a refined, lighter style compared to the full solid infill variant. No lever, cylinder or turn snib. Non-handed - installs on either side of the door. For the complementary pull-side plate, refer to the outlined pull variant (code G) or solid infill pull variant (code X).
Usually ships in 11 business days
Please confirm suitability before ordering.
Available Finish Options
Satin Stainless Steel
SS - Non-handed
Fire Rated
- Fire rated up to 2 hours - AS1905.1:2005. Fire performance is dependent on doorset type and configuration. Compliance is system-based and limited by the FRL of the complete doorset assembly.
Key Features
- Round corner 162 x 162mm exterior plate with 10mm radius corners - Lockwood Artefact 202 Series
- Plain Plate with Push Text Outlined Engraving (Function 07, code F)
- Outlined infill - "PUSH" in black gloss outline with hollow letter interior
- Non-handed. No lever, cylinder or turn snib. Concealed fixings at 4 points. Supplied in trade pack.
- Tested to Level D8 (500,000 cycles) - AS4145.2-2008. Fire rated to 2 hours - AS1905.1:2005
- 25-year mechanical warranty
Suitable Uses
- Push-side of pass doors in commercial, retail, hospitality and public-access buildings
- High-traffic entry and internal doors requiring clear push-side directional signage on the plate face
- Fire-rated door assemblies (when paired with a rated Lockwood mortice lock)
Full Specifications
Dimensions & Technical Drawings
Helpful Tips
- Outlined vs solid infill: Code F produces outlined "PUSH" text. For full solid infill "PUSH" refer to code W.
- Complementary pull plate: This plate suits the push side - pair with an outlined pull plate (code G, 20207FNSS companion) or a pull handle plate (Function 24) on the other side.
- Exterior plate - pairs with 203 Series: This is the outside face plate. It must be paired with a 203 Series interior plate (round corner) - not a 201 Series. The interior plate must use visible fixings.
- Thick doors: For doors 45-55mm, order long fixing screws SP2000-208 separately.
- Non-returnable: Confirm finish and handing before ordering - this item cannot be returned once purchased.
Mechanical: 25 years. Electrical/electronic: 2 years (excl. batteries).
- Everbrass: 25 years
- Stainless Steel, Chrome & Anodised: Up to 10 years
- PVD / VIVID: 10 years
- Symmetry: 5 years
- Decorative finishes (Bronze, Antique, Powdercoat): Typically 2 years
Lockwood 200/202 Series Handle Catalogue
Lockwood Warranty Overview
Lockwood branded products are covered by manufacturer warranties issued by ASSA ABLOY Australia Pty Ltd. Warranty periods vary depending on product type, mechanical components, electrical elements, and finish category.
This overview summarises the structure of Lockwood warranty coverage. Full terms, exclusions and claim procedures are set out in the official Lockwood Warranty document.
Warranty Periods Summary
Finish Coverage Guide
- Everbrass finishes: up to 25 years against corrosion, tarnishing and discolouration.
- Stainless steel, polished stainless steel, chrome plating and anodised finishes: typically up to 10 years.
- Decorative finishes including Antique Copper, Architectural Bronze, Oil Rubbed Bronze, Aged Brass, Polished Brass, Satin Brass and related variants: typically up to 2 years against corrosion.
- Unlacquered brass finishes will naturally age and change appearance over time. This is not considered a defect.
- Tea staining of stainless steel is not covered where cleaning and maintenance have not been followed.
What the Warranty Covers
- Defects in material and workmanship during the applicable warranty period.
- Assessment by ASSA ABLOY to determine repair, replacement with the same or closest equivalent product, or refund of purchase price.
Common Exclusions
- Normal wear and tear.
- Misuse, abuse, accidental damage or use outside published specifications.
- Improper maintenance or failure to follow care instructions.
- Unauthorised modification, repair or use of non-genuine parts.
- Exposure to corrosive environments including coastal air, salt spray, chemicals or pollution.
- Removal, refitment or associated labour charges.
- Products not originally sold in Australia through authorised channels.
Warranty Claim Process
- Retain proof of original purchase.
- Return the product through the original place of purchase where applicable.
- If claiming directly, obtain a case number before returning goods.
- Products must be securely packed and clearly identified.
- Warranty assessment determines repair, replacement or refund.
Australian Consumer Law
Lockwood warranties operate in addition to rights available under the Australian Consumer Law. Goods come with guarantees that cannot be excluded. Customers may be entitled to a replacement or refund for a major failure and compensation for reasonably foreseeable loss or damage.
Where a product fails to meet acceptable quality standards and the failure does not amount to a major failure, the customer is entitled to repair or replacement.
