Lockwood 201 Interior Square Corner Plain Plate | Artefact Series
The Lockwood 201 Series Plain Plate is part of the premium Artefact range of square corner plate door furniture — designed, assembled and customised in Australia for the Australian market. This interior plate features a clean, uninterrupted face with no lever or cylinder cut-out, making it the ideal inside plate for push/pull and flush pull door applications, or where a separate access device is being used.
The 201 plain plate pairs back-to-back with the 200 Series exterior plate, sharing the same 162 × 162mm square corner profile. It is compatible with Lockwood Selector 3770 and Synergy 3570 Series Mortice Locks, latches, and push and pull doors.
Available in two standard finishes — Natural Anodised Aluminium and Satin Stainless Steel — the plain plate suits commercial and architectural applications where a minimal, uncluttered interior face is required.
Usually ships in 11 business days
This product is a special order item. Please confirm finish and door thickness suitability before ordering as it cannot be returned.
Available Finish Options
Natural Anodised
NT
Satin Stainless Steel
SS
Finish selection does not affect functionality, compliance, or performance.
Fire Rated
- Tested up to 4 hours with a fire rated Lockwood mortice lock on fire door assemblies in accordance with AS1905.1:2005 (Fire Resistant Doorsets).
- Fire performance is dependent on doorset type and configuration.
- Fire compliance is system-based and limited by the Fire Resistance Level of the complete doorset assembly.
Key Features
- Square corner 162 × 162mm interior plain plate — Lockwood Artefact Series
- No lever or cylinder cut-out — clean, uninterrupted face
- Plain plates are not handed — suitable for either side
- Designed, assembled and customised in Australia for the Australian market
- Tested to Level D8 (500,000 cycles) — AS4145.2-2008
- Fire tested up to 4 hours — AS1905.1:2005
- Pairs back-to-back with the 200 Series exterior plate
- Concealed or visible fixing options
- Compatible with Lockwood Selector 3770 and Synergy 3570 Series Mortice Locks, latches, and push/pull doors
- 25-year mechanical warranty
Suitable Uses
- Push/pull doors where no interior access device is required
- Flush pull applications (minimum door thickness 40mm when back to back)
- Commercial office and corridor doors
- Fire-rated door assemblies (when paired with a rated Lockwood mortice lock)
- Architecturally specified projects requiring a clean, minimal interior face
- Installations where a separate access control device is fitted independently
Full Specifications
Dimensions & Technical Drawings
Item Codes
Helpful Tips
- Interior plate only: The 201 Series is always the inside plate — pair with a 200 Series exterior plate.
- Not handed: Plain plates have no lever cut-out and are not directional — one SKU suits both sides of the door.
- Flush pulls: If using flush pulls back to back, minimum door thickness is 40mm.
- Thick doors: For doors 45–55mm, order long fixing screws SP2000-208 separately.
- Fixing: If the outside plate is concealed fixed, the inside plate must be visible fixed.
- Non-returnable: Confirm finish before ordering — this item cannot be returned once purchased.
Lockwood branded products purchased new in Australia from authorised resellers are covered against defects in materials and workmanship for:
- Mechanical components: 25 years
- Electrical and electronic components: 2 years (excluding batteries)
- Everbrass: 25 years
- Stainless Steel, Chrome & Anodised: Up to 10 years
- PVD / VIVID: 10 years
- Symmetry: 5 years
- Decorative finishes (Bronze, Antique, Powdercoat): Typically 2 years
Lockwood 200/202 Series Handle Catalogue
Lockwood Warranty Overview
Lockwood branded products are covered by manufacturer warranties issued by ASSA ABLOY Australia Pty Ltd. Warranty periods vary depending on product type, mechanical components, electrical elements, and finish category.
This overview summarises the structure of Lockwood warranty coverage. Full terms, exclusions and claim procedures are set out in the official Lockwood Warranty document.
Warranty Periods Summary
Finish Coverage Guide
- Everbrass finishes: up to 25 years against corrosion, tarnishing and discolouration.
- Stainless steel, polished stainless steel, chrome plating and anodised finishes: typically up to 10 years.
- Decorative finishes including Antique Copper, Architectural Bronze, Oil Rubbed Bronze, Aged Brass, Polished Brass, Satin Brass and related variants: typically up to 2 years against corrosion.
- Unlacquered brass finishes will naturally age and change appearance over time. This is not considered a defect.
- Tea staining of stainless steel is not covered where cleaning and maintenance have not been followed.
What the Warranty Covers
- Defects in material and workmanship during the applicable warranty period.
- Assessment by ASSA ABLOY to determine repair, replacement with the same or closest equivalent product, or refund of purchase price.
Common Exclusions
- Normal wear and tear.
- Misuse, abuse, accidental damage or use outside published specifications.
- Improper maintenance or failure to follow care instructions.
- Unauthorised modification, repair or use of non-genuine parts.
- Exposure to corrosive environments including coastal air, salt spray, chemicals or pollution.
- Removal, refitment or associated labour charges.
- Products not originally sold in Australia through authorised channels.
Warranty Claim Process
- Retain proof of original purchase.
- Return the product through the original place of purchase where applicable.
- If claiming directly, obtain a case number before returning goods.
- Products must be securely packed and clearly identified.
- Warranty assessment determines repair, replacement or refund.
Australian Consumer Law
Lockwood warranties operate in addition to rights available under the Australian Consumer Law. Goods come with guarantees that cannot be excluded. Customers may be entitled to a replacement or refund for a major failure and compensation for reasonably foreseeable loss or damage.
Where a product fails to meet acceptable quality standards and the failure does not amount to a major failure, the customer is entitled to repair or replacement.
