Lockwood 201 Interior Square Corner Plate - Flush Pull Only | Satin Stainless Steel
The Lockwood 201 Series Interior Plate with Flush Pull is part of the distinguished Artefact range of square corner plate door furniture - designed, assembled and customised in Australia for the Australian market. This configuration features a recessed flush pull set into the 162 x 162mm square corner plate with no cylinder or turn snib, providing a low-profile pull function ideal for sliding doors and pass doors where a projecting handle is not suitable.
The Artefact range in Aluminium, Brass and Stainless Steel offers architects and specifiers a complete selection of slim-line door furniture plates suited to public, commercial, industrial and institutional buildings where high-grade, durable fittings are required. This interior plate pairs back-to-back with the 200 Series exterior plate and is compatible with Lockwood Synergy 3570 and Selector 3770 Series Mortice Locks, latches, and push/pull doors.
Supplied in Satin Stainless Steel with visible fixings at four points. Non-handed - suits either side of the door.
Usually ships in 11 business days
This product is a special order item and cannot be returned. Please confirm suitability before ordering.
Finish
Satin Stainless Steel
SS
Single finish option for this configuration. Non-handed - suits either side of the door.
Fire Rated
- Fire rated up to 2 hours in accordance with AS1905.1:2005 (Fire Resistant Doorsets).
- Fire performance is dependent on doorset type and configuration.
- Fire compliance is system-based and limited by the Fire Resistance Level of the complete doorset assembly.
Key Features
- Square corner 162 x 162mm interior plate - Lockwood Artefact Series
- Flush Pull Only configuration (Function 31) - recessed flush pull, no cylinder or turn snib
- Low-profile recessed pull - no projecting handle
- Non-handed - suits either side of the door
- Visible fixings at 4 points (screws not included)
- Slim-line profile suited to public, commercial, industrial and institutional buildings
- Designed, assembled and customised in Australia for the Australian market
- Tested to Level D8 (500,000 cycles) - AS4145.2-2008
- Fire rated up to 2 hours - AS1905.1:2005
- Pairs back-to-back with the 200 Series exterior plate
- Compatible with Lockwood Synergy 3570 and Selector 3770 Series Mortice Locks, latches and push/pull doors
- Supplied in trade pack
- 25-year mechanical warranty
Suitable Uses
- Sliding doors where a projecting pull handle is not practical
- Pass doors and cavity slider applications in commercial and residential settings
- Applications where a flush, unobtrusive pull is preferred on the interior face
- Office, retail, hospitality and public building internal doors
- Fire-rated door assemblies (when paired with a rated Lockwood mortice lock)
- Architecturally specified projects requiring a consistent slim-line stainless steel plate profile
Full Specifications
Dimensions & Technical Drawings
Helpful Tips
- Interior plate only: The 201 Series is always the inside plate - pair with a 200 Series exterior plate.
- Sliding doors: Flush pull plates are recommended for sliding and cavity slider doors where a projecting handle would obstruct the door recess or frame.
- Flush pull back to back: Minimum door thickness is 40mm when using flush pulls back to back. For standard doors below 40mm, review suitability carefully.
- Non-handed: Flush pull plates have no directional cut-out and suit both sides of the door without adjustment.
- Screws not included: Visible fixing screws are not supplied with this plate - order appropriate fixings separately.
- Fire rating note: This plate is fire rated to 2 hours - confirm this meets your fire door assembly specification before ordering.
- Thick doors: For doors 45-55mm, order long fixing screws SP2000-208 separately.
- Non-returnable: This item cannot be returned once ordered - confirm suitability before purchasing.
Lockwood branded products purchased new in Australia from authorised resellers are covered against defects in materials and workmanship for:
- Mechanical components: 25 years
- Electrical and electronic components: 2 years (excluding batteries)
- Everbrass: 25 years
- Stainless Steel, Chrome & Anodised: Up to 10 years
- PVD / VIVID: 10 years
- Symmetry: 5 years
- Decorative finishes (Bronze, Antique, Powdercoat): Typically 2 years
Lockwood 200/202 Series Handle Catalogue
Lockwood Warranty
Lockwood branded products are covered by manufacturer warranties issued by ASSA ABLOY Australia Pty Ltd. Warranty periods vary by product type, with separate cover for mechanical components, electrical and electronic parts, keys, and finishes.
The summary below sets out the standard warranty structure. All warranty claims are handled by Terry's Tradies Pty Ltd and its associated websites, trading names, and subsidiaries. Full terms and exclusions are set out in the official Lockwood warranty document linked at the base of this page.
Warranty Summary
Finish Coverage Guide
- Everbrass finishes: up to 25 years against corrosion, tarnishing and discolouration.
- Stainless steel, polished stainless steel, chrome plating and anodised finishes: typically up to 10 years.
- PVD and VIVID finishes: typically up to 10 years.
- Symmetry range finishes: typically up to 5 years.
- Decorative finishes (Antique Copper, Architectural Bronze, Oil Rubbed Bronze, Aged Brass, Polished Brass, Satin Brass and related variants): typically up to 2 years against corrosion.
- Unlacquered brass finishes naturally age and change appearance over time. This is not considered a defect.
- Tea staining of stainless steel is not covered where the required cleaning and maintenance have not been followed.
How to Make a Claim
- Contact Terry's Tradies Pty Ltd and its associated websites, trading names, and subsidiaries with your proof of original purchase.
- Keep the product securely packed and clearly identified, ready for assessment.
- Where a claim is escalated to the manufacturer, ASSA ABLOY may issue a case number before goods are returned.
- ASSA ABLOY assesses the claim and determines repair, replacement with the same or closest equivalent product, or refund of the purchase price.
Exclusions
- Normal wear and tear.
- Misuse, abuse, accidental damage or use outside published specifications.
- Improper maintenance or failure to follow care instructions.
- Unauthorised modification, repair or use of non-genuine parts.
- Exposure to corrosive environments including coastal air, salt spray, chemicals or pollution.
- Removal, refitment or associated labour charges.
- Products not originally sold in Australia through authorised channels.
These manufacturer warranties apply in addition to your rights under the Australian Consumer Law. Our goods come with guarantees that cannot be excluded under the ACL. You are entitled to a replacement or refund for a major failure and to compensation for any other reasonably foreseeable loss or damage. Where a failure does not amount to a major failure, you are entitled to have the goods repaired or replaced.
