Lockwood 203 Interior Round Corner Plate - Flush Pull Only | Satin Stainless Steel
The Lockwood 203 Series Interior Plate with Flush Pull Only features a flush pull - a recessed pull handle that sits flush with the plate surface when not in use - with no lever, cylinder or engraving. Provides a low-profile interior grip on fire doors, service doors and applications where a projecting handle is not required on the interior face. Non-handed.
Pairs with the 202 Series exterior plate using visible fixings. Supplied in Satin Stainless Steel.
Usually ships in 11 business days
Please confirm suitability before ordering.
Available Finish Options
Satin Stainless Steel
SS - Non-handed
Fire Rated
- Fire rated up to 4 hours - AS1905.1:2005. Fire performance is dependent on doorset type and configuration. Compliance is system-based and limited by the FRL of the complete doorset assembly.
Key Features
- Round corner 162 x 162mm interior plate with 10mm radius corners - Lockwood Artefact 203 Series
- Flush Pull Only (Function 31) - recessed flush pull, no projecting handle
- No lever, cylinder or engraving. Non-handed.
- Visible fixings at 4 points. Fixing screws not included. Supplied in trade pack.
- Fire rated to 4 hours - AS1905.1:2005. D8 tested. Pairs with 202 Series exterior plate.
Full Specifications
Dimensions & Technical Drawings
Helpful Tips
- Minimum door thickness for back-to-back flush pulls: 40mm minimum when two flush pull plates are fitted back to back.
- For flush pull with cylinder: Refer to 20332NA (flush pull and cylinder interior plate).
- For flush pull with turnknob: Refer to 20334NN (turnknob and flush pull interior plate).
- Fixing screws not supplied: The visible fixing screws for this interior plate are not included and must be ordered separately to suit the door thickness.
- Interior plate - pairs with 202 Series: This is the inside face plate. It must be paired with a 202 Series exterior plate (round corner). The interior plate uses visible fixings; the exterior 202 plate uses concealed fixings.
- Thick doors: For doors 45-55mm, order long fixing screws SP2000-208 separately.
- Non-returnable: Confirm finish and handing before ordering - this item cannot be returned once purchased.
Mechanical: 25 years. Electrical/electronic: 2 years (excl. batteries).
- Everbrass: 25 years
- Stainless Steel, Chrome & Anodised: Up to 10 years
- PVD / VIVID: 10 years
- Symmetry: 5 years
- Decorative finishes (Bronze, Antique, Powdercoat): Typically 2 years
Lockwood 200/202 Series Handle Catalogue
Lockwood Push Pull Door Handles Catalogue
Lockwood Warranty Overview
Lockwood branded products are covered by manufacturer warranties issued by ASSA ABLOY Australia Pty Ltd. Warranty periods vary depending on product type, mechanical components, electrical elements, and finish category.
This overview summarises the structure of Lockwood warranty coverage. Full terms, exclusions and claim procedures are set out in the official Lockwood Warranty document.
Warranty Periods Summary
Finish Coverage Guide
- Everbrass finishes: up to 25 years against corrosion, tarnishing and discolouration.
- Stainless steel, polished stainless steel, chrome plating and anodised finishes: typically up to 10 years.
- Decorative finishes including Antique Copper, Architectural Bronze, Oil Rubbed Bronze, Aged Brass, Polished Brass, Satin Brass and related variants: typically up to 2 years against corrosion.
- Unlacquered brass finishes will naturally age and change appearance over time. This is not considered a defect.
- Tea staining of stainless steel is not covered where cleaning and maintenance have not been followed.
What the Warranty Covers
- Defects in material and workmanship during the applicable warranty period.
- Assessment by ASSA ABLOY to determine repair, replacement with the same or closest equivalent product, or refund of purchase price.
Common Exclusions
- Normal wear and tear.
- Misuse, abuse, accidental damage or use outside published specifications.
- Improper maintenance or failure to follow care instructions.
- Unauthorised modification, repair or use of non-genuine parts.
- Exposure to corrosive environments including coastal air, salt spray, chemicals or pollution.
- Removal, refitment or associated labour charges.
- Products not originally sold in Australia through authorised channels.
Warranty Claim Process
- Retain proof of original purchase.
- Return the product through the original place of purchase where applicable.
- If claiming directly, obtain a case number before returning goods.
- Products must be securely packed and clearly identified.
- Warranty assessment determines repair, replacement or refund.
Australian Consumer Law
Lockwood warranties operate in addition to rights available under the Australian Consumer Law. Goods come with guarantees that cannot be excluded. Customers may be entitled to a replacement or refund for a major failure and compensation for reasonably foreseeable loss or damage.
Where a product fails to meet acceptable quality standards and the failure does not amount to a major failure, the customer is entitled to repair or replacement.
