Lockwood 203 Interior Round Corner Plate - Flush Pull & Cylinder | Right Hand | Satin Stainless Steel
The Lockwood 203 Series Interior Plate with Flush Pull and Cylinder is part of the Artefact range of round corner plate door furniture. This interior plate combines a flush pull for gripping the door from the inside with a Lockwood 570 Series oval cylinder hole, providing keyed interior access alongside a recessed flush grip. The flush pull sits flush with the plate surface when not in use, keeping a low-profile interior face.
The cylinder must be ordered separately. This plate pairs back-to-back with the 202 Series exterior plate (round corner) using visible fixings on the interior face. Supplied in Satin Stainless Steel, Right Hand.
Estimated Warehouse Dispatch
Usually ships in 11 business days
Usually ships in 11 business days
Special Order - Non-Returnable Item
Please confirm cylinder compatibility and suitability before ordering.
Please confirm cylinder compatibility and suitability before ordering.
Available Finish Options
Satin Stainless Steel
SS - Right Hand
Fire Rated
- Fire rated up to 4 hours - AS1905.1:2005. Fire performance is dependent on doorset type and configuration. Compliance is system-based and limited by the FRL of the complete doorset assembly.
Key Features
- Round corner 162 x 162mm interior plate with 10mm radius corners - Lockwood Artefact 203 Series
- Flush Pull and Cylinder (Function 32) - recessed flush pull with cylinder hole
- Flush pull - recessed grip, no projecting handle profile
- Accepts Lockwood 570 Series oval cylinder - 32mm (H) x 18mm (W). Cylinder not included - order separately.
- Visible fixings at 4 points. Fixing screws not included. Supplied in trade pack.
- Right Hand. Designed, assembled and customised in Australia.
- Tested to Level D8 (500,000 cycles) - AS4145.2-2008. Fire rated to 4 hours - AS1905.1:2005.
- Pairs with 202 Series exterior plate (round corner). 25-year mechanical warranty.
Suitable Uses
- Interior face of fire doors and service doors requiring keyed access with a flush grip
- Applications where a projecting lever or handle is not desired on the interior face
- Sliding and swing-clear door interiors with limited clearance requiring a flush grip and keyed cylinder
Full Specifications
Dimensions & Technical Drawings
Plate dimension drawing - 162 x 162mm round corner profile, 10mm radius corners and cross-section details.
Standards and compliance - fire rating, Level D8 cycling test and anti-corrosion.
Functions diagram - full range of 202/203 Series plate configurations.
Ordering procedure for the 200/202 Series - plate type, function, engraving, cylinder, lever, handing and finish codes.
Helpful Tips
- Cylinder not included: This plate accepts a Lockwood 570 Series oval cylinder (32mm H x 18mm W) but the cylinder is not supplied - order separately.
- Fixing screws not supplied: The visible fixing screws for this interior plate are not included and must be ordered separately to suit the door thickness.
- Interior plate - pairs with 202 Series: This is the inside face plate. It must be paired with a 202 Series exterior plate (round corner). The interior plate uses visible fixings; the exterior 202 plate uses concealed fixings.
- Right Hand only: Contact us if left hand is required.
- Thick doors: For doors 45-55mm, order long fixing screws SP2000-208 separately.
- Non-returnable: Confirm finish and handing before ordering - this item cannot be returned once purchased.
Lockwood Warranty (Australia)
Mechanical: 25 years. Electrical/electronic: 2 years (excl. batteries).
Mechanical: 25 years. Electrical/electronic: 2 years (excl. batteries).
Finish Warranty Guide:
- Everbrass: 25 years
- Stainless Steel, Chrome & Anodised: Up to 10 years
- PVD / VIVID: 10 years
- Symmetry: 5 years
- Decorative finishes (Bronze, Antique, Powdercoat): Typically 2 years
Cosmetic finishes, batteries, normal wear and tear, misuse, unauthorised modification, corrosion and labour or freight costs are excluded.
This warranty operates in addition to rights under the Australian Consumer Law.
Download PDF Resources
Lockwood 200/202 Series Handle Catalogue
Lockwood Push Pull Door Handles Catalogue
Lockwood 200/202 Series Handle Catalogue
Lockwood Push Pull Door Handles Catalogue
Lockwood Warranty
Lockwood branded products are covered by manufacturer warranties issued by ASSA ABLOY Australia Pty Ltd. Warranty periods vary by product type, with separate cover for mechanical components, electrical and electronic parts, keys, and finishes.
The summary below sets out the standard warranty structure. All warranty claims are handled by Terry's Tradies Pty Ltd and its associated websites, trading names, and subsidiaries. Full terms and exclusions are set out in the official Lockwood warranty document linked at the base of this page.
Warranty Summary
Finish Coverage Guide
- Everbrass finishes: up to 25 years against corrosion, tarnishing and discolouration.
- Stainless steel, polished stainless steel, chrome plating and anodised finishes: typically up to 10 years.
- PVD and VIVID finishes: typically up to 10 years.
- Symmetry range finishes: typically up to 5 years.
- Decorative finishes (Antique Copper, Architectural Bronze, Oil Rubbed Bronze, Aged Brass, Polished Brass, Satin Brass and related variants): typically up to 2 years against corrosion.
- Unlacquered brass finishes naturally age and change appearance over time. This is not considered a defect.
- Tea staining of stainless steel is not covered where the required cleaning and maintenance have not been followed.
How to Make a Claim
For full returns and warranty claim procedures, visit our Returns & Warranty page - this is kept up to date and is the authoritative reference for current claim steps.
- Contact Terry's Tradies Pty Ltd and its associated websites, trading names, and subsidiaries with your proof of original purchase.
- Keep the product securely packed and clearly identified, ready for assessment.
- Where a claim is escalated to the manufacturer, ASSA ABLOY may issue a case number before goods are returned.
- ASSA ABLOY assesses the claim and determines repair, replacement with the same or closest equivalent product, or refund of the purchase price.
Exclusions
- Normal wear and tear.
- Misuse, abuse, accidental damage or use outside published specifications.
- Improper maintenance or failure to follow care instructions.
- Unauthorised modification, repair or use of non-genuine parts.
- Exposure to corrosive environments including coastal air, salt spray, chemicals or pollution.
- Removal, refitment or associated labour charges.
- Products not originally sold in Australia through authorised channels.
Australian Consumer Law
These manufacturer warranties apply in addition to your rights under the Australian Consumer Law. Our goods come with guarantees that cannot be excluded under the ACL. You are entitled to a replacement or refund for a major failure and to compensation for any other reasonably foreseeable loss or damage. Where a failure does not amount to a major failure, you are entitled to have the goods repaired or replaced.
These manufacturer warranties apply in addition to your rights under the Australian Consumer Law. Our goods come with guarantees that cannot be excluded under the ACL. You are entitled to a replacement or refund for a major failure and to compensation for any other reasonably foreseeable loss or damage. Where a failure does not amount to a major failure, you are entitled to have the goods repaired or replaced.
