Lockwood 201 Interior Square Corner Plate - P1 Pull Handle | Satin Stainless Steel
The Lockwood 201 Series Interior Plate with P1 Pull Handle is part of the distinguished Artefact range of square corner plate door furniture - designed, assembled and customised in Australia for the Australian market. This interior plate features the P1 stainless steel pull handle with no cylinder or turn snib, providing a robust, clean pull function for pass doors and push/pull applications in commercial and institutional environments.
The Artefact range in Aluminium, Brass and Stainless Steel offers architects and specifiers a complete selection of slim-line door furniture plates suited to public, commercial, industrial and institutional buildings where high-grade, durable fittings are required. This plate pairs back-to-back with the 200 Series exterior plate and is compatible with Lockwood Synergy 3570 and Selector 3770 Series Mortice Locks, latches, and push/pull doors.
Supplied in Satin Stainless Steel with visible fixings at four points. Non-handed - suits either side of the door.
Usually ships in 11 business days
This product is a special order item and cannot be returned. Please confirm suitability before ordering.
Finish
Satin Stainless Steel
SS
Single finish option for this configuration. Non-handed - suits either side of the door.
Fire Rated
- Fire rated up to 2 hours in accordance with AS1905.1:2005 (Fire Resistant Doorsets).
- Fire performance is dependent on doorset type and configuration.
- Fire compliance is system-based and limited by the Fire Resistance Level of the complete doorset assembly.
Key Features
- Square corner 162 x 162mm interior plate - Lockwood Artefact Series
- Pull Handle Only configuration (Function 24) - P1 stainless steel pull handle
- No cylinder or turn snib
- Non-handed - suits either side of the door
- Visible fixings at 4 points (screws not included)
- Slim-line profile suited to public, commercial, industrial and institutional buildings
- Designed, assembled and customised in Australia for the Australian market
- Tested to Level D8 (500,000 cycles) - AS4145.2-2008
- Fire rated up to 2 hours - AS1905.1:2005
- Pairs back-to-back with the 200 Series exterior plate
- Compatible with Lockwood Synergy 3570 and Selector 3770 Series Mortice Locks, latches and push/pull doors
- Supplied in trade pack
- 25-year mechanical warranty
Suitable Uses
- Pass doors and push/pull doors in commercial and institutional buildings
- Office, retail, hospitality and public building entry and internal doors
- Applications where no locking function is required on the interior face
- Fire-rated door assemblies (when paired with a rated Lockwood mortice lock)
- Architecturally specified projects requiring a consistent stainless steel plate and handle profile
Full Specifications
Dimensions & Technical Drawings
Helpful Tips
- Interior plate only: The 201 Series is always the inside plate - pair with a 200 Series exterior plate.
- P1 vs 75 pull handle: The P1 is the stainless steel pull handle. If a Natural Anodised Aluminium pull is required, specify the 75 variant instead (item code 20124NN/75NT).
- Non-handed: Pull handle plates have no directional cut-out and suit both sides of the door without adjustment.
- Screws not included: Visible fixing screws are not supplied with this plate - order appropriate fixings separately.
- Flush pulls back to back: Minimum door thickness is 40mm when using flush pulls back to back.
- Thick doors: For doors 45-55mm, order long fixing screws SP2000-208 separately.
- Fire rating note: This plate is fire rated to 2 hours - confirm this meets your fire door assembly specification before ordering.
- Non-returnable: This item cannot be returned once ordered - confirm suitability before purchasing.
Lockwood branded products purchased new in Australia from authorised resellers are covered against defects in materials and workmanship for:
- Mechanical components: 25 years
- Electrical and electronic components: 2 years (excluding batteries)
- Everbrass: 25 years
- Stainless Steel, Chrome & Anodised: Up to 10 years
- PVD / VIVID: 10 years
- Symmetry: 5 years
- Decorative finishes (Bronze, Antique, Powdercoat): Typically 2 years
Lockwood 200/202 Series Handle Catalogue
Lockwood Warranty Overview
Lockwood branded products are covered by manufacturer warranties issued by ASSA ABLOY Australia Pty Ltd. Warranty periods vary depending on product type, mechanical components, electrical elements, and finish category.
This overview summarises the structure of Lockwood warranty coverage. Full terms, exclusions and claim procedures are set out in the official Lockwood Warranty document.
Warranty Periods Summary
Finish Coverage Guide
- Everbrass finishes: up to 25 years against corrosion, tarnishing and discolouration.
- Stainless steel, polished stainless steel, chrome plating and anodised finishes: typically up to 10 years.
- Decorative finishes including Antique Copper, Architectural Bronze, Oil Rubbed Bronze, Aged Brass, Polished Brass, Satin Brass and related variants: typically up to 2 years against corrosion.
- Unlacquered brass finishes will naturally age and change appearance over time. This is not considered a defect.
- Tea staining of stainless steel is not covered where cleaning and maintenance have not been followed.
What the Warranty Covers
- Defects in material and workmanship during the applicable warranty period.
- Assessment by ASSA ABLOY to determine repair, replacement with the same or closest equivalent product, or refund of purchase price.
Common Exclusions
- Normal wear and tear.
- Misuse, abuse, accidental damage or use outside published specifications.
- Improper maintenance or failure to follow care instructions.
- Unauthorised modification, repair or use of non-genuine parts.
- Exposure to corrosive environments including coastal air, salt spray, chemicals or pollution.
- Removal, refitment or associated labour charges.
- Products not originally sold in Australia through authorised channels.
Warranty Claim Process
- Retain proof of original purchase.
- Return the product through the original place of purchase where applicable.
- If claiming directly, obtain a case number before returning goods.
- Products must be securely packed and clearly identified.
- Warranty assessment determines repair, replacement or refund.
Australian Consumer Law
Lockwood warranties operate in addition to rights available under the Australian Consumer Law. Goods come with guarantees that cannot be excluded. Customers may be entitled to a replacement or refund for a major failure and compensation for reasonably foreseeable loss or damage.
Where a product fails to meet acceptable quality standards and the failure does not amount to a major failure, the customer is entitled to repair or replacement.
