Lockwood Vivid 150mm Sliding Door Flush Pull - PVD
The Lockwood Vivid 150mm Flush Pull is a recessed sliding door handle designed for internal cavity sliding door applications. The pull sits fully recessed into the door panel surface, providing a clean, unobtrusive profile when the door is in any position.
The internal edges of the flush pull are machined and finished for user comfort, reducing sharp transitions and softening the overall aesthetic. All visible surfaces are 304 stainless steel with a Physical Vapour Deposition (PVD) surface treatment, available in Satin Brass, Satin Gun Metal, and Satin Bronze - all finishes coordinated across the Lockwood Vivid Collection.
Available Finish Options
Satin Brass PVD
Satin Gun Metal PVD
Satin Bronze PVD
Finish selection does not affect functionality or performance. PVD surface treatment is applied over 304 stainless steel. Finish appearance may vary under different lighting conditions.
Key Features
- 150mm flush pull sits fully recessed into the door panel surface.
- Internal edges finished for grip comfort and visual appeal.
- 304 stainless steel with durable PVD surface treatment.
- Tested to AS4145.2:2008 - D7 durability rating (300,000 cycles).
- Tested to AS4145.2:2008 - C6 neutral salt spray resistance (168 hours).
- Suited to internal cavity sliding doors in residential applications.
- Coordinates with other products in the Lockwood Vivid Collection.
What's in the Box
- 150mm flush pull (1 unit)
- Fixing screws
Suitable Uses
- Internal cavity sliding doors in residential dwellings.
- Bedroom, living, kitchen, and laundry sliding door applications.
- Doors requiring a clean, flush-mounted handle profile.
- Coordinated installations with Lockwood Vivid door furniture and leversets.
Full Specifications
Vivid Collection - Sliding Door Hardware Range
This product is part of the Vivid Collection sliding door hardware range. Use the table below to identify the correct product for your application.
Frequently Asked Questions
- Can flush pulls be used on standard hinged doors?
No. Flush pulls are designed for sliding and cavity doors only. They are not suited to hinged door applications. - Are flush pulls sold in pairs?
Each unit is sold individually. Two flush pulls are typically required for two-sided operation on a sliding door - one on each face. - Does this flush pull provide a privacy or locking function?
No. This is a non-locking pull handle only. For a privacy function on a cavity sliding door, refer to the Lockwood Vivid Privacy Cavity Slider (VIVCAV2). - What door thickness is this suited to?
The flush pull is designed for standard internal residential cavity sliding doors. Confirm door preparation requirements with a qualified installer before ordering. - Is the PVD finish durable enough for regular use?
Yes. The flush pull is tested to D7 durability (300,000 cycles) and C6 neutral salt spray resistance under AS4145.2:2008, confirming suitability for regular residential use.
Additional Information
- Door Preparation: Accurate routing of the door panel is required to achieve a flush fit. Incorrect preparation will result in an uneven or proud installation that may affect operation and appearance. A qualified carpenter should carry out the work.
- Single vs. Pair Installation: A single flush pull provides one-sided access. Most cavity sliding door installations use two flush pulls - one on each door face - for access from both sides.
- PVD Finish Characteristics: The PVD process bonds the finish at a molecular level, producing a surface that is harder and more durable than conventional electroplated finishes. It is also considered a cleaner manufacturing process compared to traditional methods.
- Finish Coordination: The Vivid Collection is available in Satin Brass, Satin Gun Metal, and Satin Bronze across all product types. Coordinating all hardware within a room delivers a consistent, professional result.
Lockwood Vivid Collection products purchased new in Australia from authorised resellers are covered against defects in materials and workmanship for:
- Mechanical components: 25 years
Lockwood Warranty
Lockwood branded products are covered by manufacturer warranties issued by ASSA ABLOY Australia Pty Ltd. Warranty periods vary by product type, with separate cover for mechanical components, electrical and electronic parts, keys, and finishes.
The summary below sets out the standard warranty structure. All warranty claims are handled by Terry's Tradies Pty Ltd and its associated websites, trading names, and subsidiaries. Full terms and exclusions are set out in the official Lockwood warranty document linked at the base of this page.
Warranty Summary
Finish Coverage Guide
- Everbrass finishes: up to 25 years against corrosion, tarnishing and discolouration.
- Stainless steel, polished stainless steel, chrome plating and anodised finishes: typically up to 10 years.
- PVD and VIVID finishes: typically up to 10 years.
- Symmetry range finishes: typically up to 5 years.
- Decorative finishes (Antique Copper, Architectural Bronze, Oil Rubbed Bronze, Aged Brass, Polished Brass, Satin Brass and related variants): typically up to 2 years against corrosion.
- Unlacquered brass finishes naturally age and change appearance over time. This is not considered a defect.
- Tea staining of stainless steel is not covered where the required cleaning and maintenance have not been followed.
How to Make a Claim
- Contact Terry's Tradies Pty Ltd and its associated websites, trading names, and subsidiaries with your proof of original purchase.
- Keep the product securely packed and clearly identified, ready for assessment.
- Where a claim is escalated to the manufacturer, ASSA ABLOY may issue a case number before goods are returned.
- ASSA ABLOY assesses the claim and determines repair, replacement with the same or closest equivalent product, or refund of the purchase price.
Exclusions
- Normal wear and tear.
- Misuse, abuse, accidental damage or use outside published specifications.
- Improper maintenance or failure to follow care instructions.
- Unauthorised modification, repair or use of non-genuine parts.
- Exposure to corrosive environments including coastal air, salt spray, chemicals or pollution.
- Removal, refitment or associated labour charges.
- Products not originally sold in Australia through authorised channels.
These manufacturer warranties apply in addition to your rights under the Australian Consumer Law. Our goods come with guarantees that cannot be excluded under the ACL. You are entitled to a replacement or refund for a major failure and to compensation for any other reasonably foreseeable loss or damage. Where a failure does not amount to a major failure, you are entitled to have the goods repaired or replaced.
