Lockwood Vivid Long Cigar Door Stop - PVD
The Lockwood Vivid Long Cigar Door Stop is a wall-mounted door stop with an elongated profile designed to protect walls, skirting boards, and door handles from impact when a door is opened. The extended cigar profile provides a larger rubber buffer contact area than compact profile door stops, making it suited to doors with a wider swing arc or where additional buffer coverage is preferred.
A black rubber buffer absorbs impact and protects the door face finish at the point of contact. All metal surfaces are 304 stainless steel with a Physical Vapour Deposition (PVD) surface treatment, in finishes coordinated across the Lockwood Vivid Collection.
Available Finish Options
Satin Brass PVD
Satin Gun Metal PVD
Satin Bronze PVD
Finish selection does not affect functionality or performance. PVD surface treatment is applied over 304 stainless steel. Finish appearance may vary under different lighting conditions.
Key Features
- Wall-mounted installation protects walls and skirting from door and handle impact.
- Elongated cigar profile provides a larger buffer contact area than compact profile door stops.
- Black rubber buffer absorbs impact and protects door face finishes.
- Holds door open at the point of contact with the buffer.
- 304 stainless steel with PVD surface treatment.
- Finishes coordinate with the full Lockwood Vivid Collection.
Suitable Uses
- Wall protection behind internal hinged doors in residential dwellings.
- Applications where an extended buffer profile is preferred or required.
- High-traffic areas including hallways, kitchens, and living rooms.
- Coordinated installations with Lockwood Vivid leversets, hinges, and sliding door hardware.
Full Specifications
Vivid Collection - Interior Accessories Range
This product is part of the Vivid Collection interior accessories range. Use the table below to identify coordinated accessories for your installation.
Frequently Asked Questions
- What is the difference between the Long Cigar and Half Moon door stops?
The Half Moon Door Stop (VIVA290) has a compact half moon profile. The Long Cigar (VIVA300) has an extended elongated profile that provides a larger rubber buffer contact area. Selection is based on the door arc, wall mounting position, and aesthetic preference. - Is this door stop suitable for floor mounting?
The VIVA300 is a wall-mounted product. Confirm floor mounting suitability with your installer or Lockwood distributor before ordering. - Will the rubber buffer mark the door face?
The rubber buffer is designed for contact with the door without marking under normal use. It is suitable for standard painted and timber door surfaces. - Is this suitable for external or outdoor use?
No. The Vivid Collection is designed for internal residential applications only. - What fixings are required for installation?
Wall fixing screws appropriate for the substrate - timber stud, masonry, or plasterboard - are required. Confirm the correct fixings with your installer.
Additional Information
- Profile Selection: The long cigar profile is suited to locations where a more prominent door stop is preferred, or where the door arc is wide and a compact profile does not provide adequate coverage at the correct mounting height.
- Positioning: Mount at the height that intercepts the door at the desired open position - typically at handle height or lower on the door face. Confirm placement with your installer before drilling.
- Finish Coordination: Select the PVD finish that matches other Vivid Collection hardware in the space. Consistent finish selection across leversets, hinges, and door stops delivers a professional, coordinated result.
Lockwood Vivid Collection products purchased new in Australia from authorised resellers are covered against defects in materials and workmanship for:
- Mechanical components: 25 years
Lockwood Warranty Overview
Lockwood branded products are covered by manufacturer warranties issued by ASSA ABLOY Australia Pty Ltd. Warranty periods vary depending on product type, mechanical components, electrical elements, and finish category.
This overview summarises the structure of Lockwood warranty coverage. Full terms, exclusions and claim procedures are set out in the official Lockwood Warranty document.
Warranty Periods Summary
Finish Coverage Guide
- Everbrass finishes: up to 25 years against corrosion, tarnishing and discolouration.
- Stainless steel, polished stainless steel, chrome plating and anodised finishes: typically up to 10 years.
- Decorative finishes including Antique Copper, Architectural Bronze, Oil Rubbed Bronze, Aged Brass, Polished Brass, Satin Brass and related variants: typically up to 2 years against corrosion.
- Unlacquered brass finishes will naturally age and change appearance over time. This is not considered a defect.
- Tea staining of stainless steel is not covered where cleaning and maintenance have not been followed.
What the Warranty Covers
- Defects in material and workmanship during the applicable warranty period.
- Assessment by ASSA ABLOY to determine repair, replacement with the same or closest equivalent product, or refund of purchase price.
Common Exclusions
- Normal wear and tear.
- Misuse, abuse, accidental damage or use outside published specifications.
- Improper maintenance or failure to follow care instructions.
- Unauthorised modification, repair or use of non-genuine parts.
- Exposure to corrosive environments including coastal air, salt spray, chemicals or pollution.
- Removal, refitment or associated labour charges.
- Products not originally sold in Australia through authorised channels.
Warranty Claim Process
- Retain proof of original purchase.
- Return the product through the original place of purchase where applicable.
- If claiming directly, obtain a case number before returning goods.
- Products must be securely packed and clearly identified.
- Warranty assessment determines repair, replacement or refund.
Australian Consumer Law
Lockwood warranties operate in addition to rights available under the Australian Consumer Law. Goods come with guarantees that cannot be excluded. Customers may be entitled to a replacement or refund for a major failure and compensation for reasonably foreseeable loss or damage.
Where a product fails to meet acceptable quality standards and the failure does not amount to a major failure, the customer is entitled to repair or replacement.
