Lockwood Vivid Privacy Cavity Door Slider
The Lockwood Vivid Privacy Cavity Door Slider is a sliding door privacy lock for internal cavity sliding doors in residential applications. It provides privacy locking from inside the room while also functioning as a door pull to draw the door out from the cavity.
The bolt mechanism is pressed to release the door pull function, allowing the door to be drawn away from the wall cavity. The fitting sits fully flush against the sliding door panel for complete recess. All visible surfaces are 304 stainless steel with a Physical Vapour Deposition (PVD) surface treatment, in finishes coordinated across the Lockwood Vivid Collection.
Available Finish Options
Satin Brass PVD
Satin Gun Metal PVD
Satin Bronze PVD
Finish selection does not affect functionality or performance. PVD surface treatment is applied over 304 stainless steel. Finish appearance may vary under different lighting conditions.
Key Features
- Privacy bolt allows door to be locked from inside the room.
- Bolt functions as a retractable door pull to draw the door from the cavity.
- Press bolt to release and engage the door pull function.
- Fits fully flush to the sliding door panel for complete cavity recess.
- Emergency release function allows door to be opened from outside in an emergency.
- 304 stainless steel with durable PVD surface treatment.
- Tested to AS4145.2:2008 - D7 durability (300,000 cycles).
- Tested to AS4145.2:2008 - C6 neutral salt spray resistance (168 hours).
- Coordinates with all products in the Lockwood Vivid Collection.
What's in the Box
- Privacy cavity slider unit
- Fixing hardware
Suitable Uses
- Internal cavity sliding doors requiring a privacy function.
- Bathroom and ensuite sliding doors.
- Bedroom and home office sliding doors.
- Residential applications requiring coordinated Vivid Collection hardware.
Full Specifications
Vivid Collection - Sliding Door Hardware Range
This product is part of the Vivid Collection sliding door hardware range. Use the table below to identify the correct product for your application.
Frequently Asked Questions
- How does the privacy function work?
The bolt on the inside of the fitting is engaged to lock the door in the closed position, preventing it from being opened from outside. The same bolt retracts to function as a door pull for drawing the door out from the cavity. - Is there an emergency release?
Yes. The fitting incorporates an emergency release function that allows the door to be opened from outside. Refer to the installation instructions for the release procedure. - Does this provide security locking?
No. The privacy cavity slider is a privacy fitting suitable for bathroom and bedroom applications. It is not a security lock and must not be relied upon as a primary security device. - Is this compatible with standard cavity door frames?
The slider is designed for standard residential cavity sliding door applications. Confirm compatibility with your door thickness and preparation with a qualified installer before ordering. - Can this be fitted to a hinged door?
No. This product is designed for sliding cavity doors only.
Additional Information
- Installation Accuracy: Correct routing and placement in the door panel is required for a flush fit and smooth bolt operation. An uneven installation may affect both the privacy bolt and the door pull function.
- Privacy vs. Security: This product provides occupancy privacy, not security locking. It is appropriate for bathrooms and bedrooms where the primary requirement is preventing unintended entry.
- Dual Function Design: The retractable bolt acting as a door pull simplifies installation and reduces the total hardware count on a cavity sliding door - combining privacy lock and door pull into a single fitting.
- Coordination: Select the PVD finish that matches other Vivid hardware installed in the space. Consistent finish selection across leversets, hinges, door stops, and sliding door hardware delivers a professional result.
Lockwood Vivid Collection products purchased new in Australia from authorised resellers are covered against defects in materials and workmanship for:
- Mechanical components: 25 years
Lockwood Warranty
Lockwood branded products are covered by manufacturer warranties issued by ASSA ABLOY Australia Pty Ltd. Warranty periods vary by product type, with separate cover for mechanical components, electrical and electronic parts, keys, and finishes.
The summary below sets out the standard warranty structure. All warranty claims are handled by Terry's Tradies Pty Ltd and its associated websites, trading names, and subsidiaries. Full terms and exclusions are set out in the official Lockwood warranty document linked at the base of this page.
Warranty Summary
Finish Coverage Guide
- Everbrass finishes: up to 25 years against corrosion, tarnishing and discolouration.
- Stainless steel, polished stainless steel, chrome plating and anodised finishes: typically up to 10 years.
- PVD and VIVID finishes: typically up to 10 years.
- Symmetry range finishes: typically up to 5 years.
- Decorative finishes (Antique Copper, Architectural Bronze, Oil Rubbed Bronze, Aged Brass, Polished Brass, Satin Brass and related variants): typically up to 2 years against corrosion.
- Unlacquered brass finishes naturally age and change appearance over time. This is not considered a defect.
- Tea staining of stainless steel is not covered where the required cleaning and maintenance have not been followed.
How to Make a Claim
- Contact Terry's Tradies Pty Ltd and its associated websites, trading names, and subsidiaries with your proof of original purchase.
- Keep the product securely packed and clearly identified, ready for assessment.
- Where a claim is escalated to the manufacturer, ASSA ABLOY may issue a case number before goods are returned.
- ASSA ABLOY assesses the claim and determines repair, replacement with the same or closest equivalent product, or refund of the purchase price.
Exclusions
- Normal wear and tear.
- Misuse, abuse, accidental damage or use outside published specifications.
- Improper maintenance or failure to follow care instructions.
- Unauthorised modification, repair or use of non-genuine parts.
- Exposure to corrosive environments including coastal air, salt spray, chemicals or pollution.
- Removal, refitment or associated labour charges.
- Products not originally sold in Australia through authorised channels.
These manufacturer warranties apply in addition to your rights under the Australian Consumer Law. Our goods come with guarantees that cannot be excluded under the ACL. You are entitled to a replacement or refund for a major failure and to compensation for any other reasonably foreseeable loss or damage. Where a failure does not amount to a major failure, you are entitled to have the goods repaired or replaced.
