Lockwood EXI284-SIL Exidor P/Bar Panic Double Door Silver
The Lockwood EXI284-SIL Exidor P/Bar Panic Double Door Silver is a surface mounted panic exit device for double door applications where fast and reliable emergency egress is required. It is part of the Lockwood Exidor series and is designed for use on non-rebated double doors.
The EXI284-SIL is a double door panic bolt set supplied in Silver finish. It uses push bar operation so the door can be opened quickly from the inside during an emergency, making it suitable for commercial and public access exit doors where panic hardware is required.
This product is commonly specified in Australian commercial and industrial sites where double door exit hardware must provide compliant escape operation, strong mechanical performance and clear emergency exit function. External access trims and extended shoot tube accessories are available separately where the door configuration requires them.
Usually ships in 3 business days
Key Features
- Push bar activated panic exit device for double door emergency egress
- Designed for non-rebated double door applications
- Surface mounted installation for straightforward fitting and maintenance
- Non-handed design, suitable for left hand and right hand door configurations
- Fire rated for use on timber and steel door assemblies where correctly specified
- Shoot bolt design supports secure top and bottom locking on double door leaves
- Tested to 200,000 operating cycles for long-term mechanical performance
- Silver finish supplied as standard for this item code
Suitable Uses
- Commercial double door emergency exits
- Non-rebated double door sets
- Public access buildings requiring panic exit hardware
- Timber and steel fire door assemblies where the complete door system is correctly specified
- Industrial, education, healthcare, retail and back-of-house exit doors
Full Specifications
Frequently Asked Questions
Is the EXI284-SIL suitable for rebated double doors?
No. The EXI284-SIL is the double door panic bolt set for non-rebated double doors. Rebated double door applications usually require the correct bolt and latch configuration, such as the EXI285-SIL, depending on the door set.
Can this be used on fire doors?
Yes, the Exidor series is fire rated for use on timber and steel fire door assemblies where the full door assembly is correctly tested, specified and installed. Always confirm fire door approval for the complete door and hardware set.
Is the outside lever trim included?
No. External lever trim is an accessory and must be ordered separately where outside access is required. A suitable Euro profile half cylinder is also required for that trim and is not supplied as part of the panic device.
Additional Information
- The EXI284-SIL is best suited to non-rebated double doors where both leaves need panic bolt operation.
- A common specification mistake is selecting a double door panic bolt set without confirming whether the meeting stiles are rebated or non-rebated.
- For doors exceeding the standard 2440mm height, the extended top shoot tube accessory should be checked during specification.
- External access from the outside requires a compatible outside access device and cylinder arrangement. These should be matched to the site keying schedule.
- For fire door applications, through fixings or other project-specific fixing requirements may be needed depending on the door manufacturer and fire test approval.
Lockwood branded products purchased new in Australia from authorised resellers are covered against defects in materials and workmanship for:
- Mechanical components: 25 years
- Electrical and electronic components: 2 years (excluding batteries)
.
Lockwood Warranty
Lockwood branded products are covered by manufacturer warranties issued by ASSA ABLOY Australia Pty Ltd. Warranty periods vary by product type, with separate cover for mechanical components, electrical and electronic parts, keys, and finishes.
The summary below sets out the standard warranty structure. All warranty claims are handled by Terry's Tradies Pty Ltd and its associated websites, trading names, and subsidiaries. Full terms and exclusions are set out in the official Lockwood warranty document linked at the base of this page.
Warranty Summary
Finish Coverage Guide
- Everbrass finishes: up to 25 years against corrosion, tarnishing and discolouration.
- Stainless steel, polished stainless steel, chrome plating and anodised finishes: typically up to 10 years.
- PVD and VIVID finishes: typically up to 10 years.
- Symmetry range finishes: typically up to 5 years.
- Decorative finishes (Antique Copper, Architectural Bronze, Oil Rubbed Bronze, Aged Brass, Polished Brass, Satin Brass and related variants): typically up to 2 years against corrosion.
- Unlacquered brass finishes naturally age and change appearance over time. This is not considered a defect.
- Tea staining of stainless steel is not covered where the required cleaning and maintenance have not been followed.
How to Make a Claim
- Contact Terry's Tradies Pty Ltd and its associated websites, trading names, and subsidiaries with your proof of original purchase.
- Keep the product securely packed and clearly identified, ready for assessment.
- Where a claim is escalated to the manufacturer, ASSA ABLOY may issue a case number before goods are returned.
- ASSA ABLOY assesses the claim and determines repair, replacement with the same or closest equivalent product, or refund of the purchase price.
Exclusions
- Normal wear and tear.
- Misuse, abuse, accidental damage or use outside published specifications.
- Improper maintenance or failure to follow care instructions.
- Unauthorised modification, repair or use of non-genuine parts.
- Exposure to corrosive environments including coastal air, salt spray, chemicals or pollution.
- Removal, refitment or associated labour charges.
- Products not originally sold in Australia through authorised channels.
These manufacturer warranties apply in addition to your rights under the Australian Consumer Law. Our goods come with guarantees that cannot be excluded under the ACL. You are entitled to a replacement or refund for a major failure and to compensation for any other reasonably foreseeable loss or damage. Where a failure does not amount to a major failure, you are entitled to have the goods repaired or replaced.
