Lockwood EXI325EA-SIL Exidor Lever OAD Euro Without Lock Silver
The Lockwood EXI325EA-SIL Exidor Lever OAD Euro Without Lock Silver is a lever operated outside access device for use with compatible Lockwood Exidor panic and emergency exit hardware. It provides controlled external entry through an escape door while still allowing immediate exit from the inside through the panic device.
This model is supplied without a cylinder, allowing the required Euro profile half cylinder to be selected separately to suit the site keying schedule. It is a practical choice for commercial doors where outside access is required without compromising emergency egress from the protected side.
The EXI325EA-SIL is through fixed, reversible and suitable for doors up to 65mm thick. It is commonly specified with Lockwood Exidor 200 and 300 series panic and emergency exit devices in Australian commercial, industrial and public access buildings.
Key Features
- Lever operated outside access device for compatible Exidor panic and emergency exit hardware
- Allows controlled entry from outside while maintaining immediate emergency exit from inside
- Supplied without lock cylinder so the Euro profile half cylinder can be matched to the site keying system
- Through fixed installation for secure mounting through the door
- Reversible handing for flexible door configuration
- Suitable for doors up to 65mm thick
- Silver finish supplied as standard for this item code
- Commonly paired with Exidor panic bolts and panic latches where outside access is required
Suitable Uses
- External access control for doors fitted with compatible Exidor panic exit hardware
- Commercial escape doors requiring key-controlled outside entry
- Single and double door applications where a compatible Exidor panic device is installed
- Education, healthcare, retail, industrial and back-of-house exit doors
- Projects requiring Euro profile cylinder keying flexibility
- Commonly specified in Australian commercial and industrial sites with Lockwood Exidor exit devices
Full Specifications
Frequently Asked Questions
Does the EXI325EA-SIL include the Euro profile half cylinder?
No. This model is supplied without the lock cylinder. A suitable Euro profile half cylinder must be ordered separately to suit the site keying requirements.
Is this a complete panic exit device?
No. The EXI325EA-SIL is an outside access device. It is used with compatible Exidor panic or emergency exit hardware and does not replace the internal panic device.
Will this stop people exiting from inside?
No. The outside access device controls entry from the outside. Immediate exit from the inside is still provided by the compatible panic or emergency exit hardware.
Additional Information
- The EXI325EA-SIL is most useful where staff, authorised users or maintenance teams need entry from outside through an emergency exit door.
- A common ordering mistake is purchasing the outside access device without allowing for the required Euro profile half cylinder.
- Cylinder length and cam style should be checked against door thickness, hardware projection and installation instructions before ordering.
- For existing doors, confirm the installed Exidor panic device model before selecting the outside access trim.
- For fire door applications, the complete door assembly and all added external hardware should be checked against the approved door schedule.
Lockwood branded products purchased new in Australia from authorised resellers are covered against defects in materials and workmanship for:
- Mechanical components: 25 years
- Electrical and electronic components: 2 years (excluding batteries)
Lockwood Panic Exit Devices Catalogue
Lockwood Panic Exit Devices Catalogue
Lockwood Warranty Overview
Lockwood branded products are covered by manufacturer warranties issued by ASSA ABLOY Australia Pty Ltd. Warranty periods vary depending on product type, mechanical components, electrical elements, and finish category.
This overview summarises the structure of Lockwood warranty coverage. Full terms, exclusions and claim procedures are set out in the official Lockwood Warranty document.
Warranty Periods Summary
Finish Coverage Guide
- Everbrass finishes: up to 25 years against corrosion, tarnishing and discolouration.
- Stainless steel, polished stainless steel, chrome plating and anodised finishes: typically up to 10 years.
- Decorative finishes including Antique Copper, Architectural Bronze, Oil Rubbed Bronze, Aged Brass, Polished Brass, Satin Brass and related variants: typically up to 2 years against corrosion.
- Unlacquered brass finishes will naturally age and change appearance over time. This is not considered a defect.
- Tea staining of stainless steel is not covered where cleaning and maintenance have not been followed.
What the Warranty Covers
- Defects in material and workmanship during the applicable warranty period.
- Assessment by ASSA ABLOY to determine repair, replacement with the same or closest equivalent product, or refund of purchase price.
Common Exclusions
- Normal wear and tear.
- Misuse, abuse, accidental damage or use outside published specifications.
- Improper maintenance or failure to follow care instructions.
- Unauthorised modification, repair or use of non-genuine parts.
- Exposure to corrosive environments including coastal air, salt spray, chemicals or pollution.
- Removal, refitment or associated labour charges.
- Products not originally sold in Australia through authorised channels.
Warranty Claim Process
- Retain proof of original purchase.
- Return the product through the original place of purchase where applicable.
- If claiming directly, obtain a case number before returning goods.
- Products must be securely packed and clearly identified.
- Warranty assessment determines repair, replacement or refund.
Australian Consumer Law
Lockwood warranties operate in addition to rights available under the Australian Consumer Law. Goods come with guarantees that cannot be excluded. Customers may be entitled to a replacement or refund for a major failure and compensation for reasonably foreseeable loss or damage.
Where a product fails to meet acceptable quality standards and the failure does not amount to a major failure, the customer is entitled to repair or replacement.
