ABUS Hasp and Staple 100/80DG with 65/30 Padlock – Combo Pack
The ABUS 10080DG6530C is a matched hasp and staple plus padlock combo pack, combining an ABUS 100/80DG flexible (double-hinge) hasp and staple with a 65/30 solid brass padlock.
The double-hinge (DG) hasp design allows greater tolerance for door and frame misalignment compared with single-hinge hasps, while still maintaining concealed fixings and hardened components.
Key Features
- Matched ABUS hasp and staple with compatible padlock supplied.
- Flexible double-hinge (DG) hasp design for uneven or misaligned doors.
- Concealed fixing to reduce screw attack.
- Hardened staple and hinge pins with 9 mm padlock eyelet.
- 65/30 solid brass padlock keyed to differ.
Specifications – Hasp and Staple
| Hasp Series | 100/80DG |
| Overall Length | 125 mm |
| Width | 27 mm |
| Staple Hole Diameter | 9 mm |
| Fixing Type | Concealed fixing, double hinge |
Specifications – Padlock
| Padlock Model | ABUS 65/30 |
| Body Width | 30 mm |
| Shackle Diameter | 5 mm |
| Horizontal Clearance | 16 mm |
| Vertical Clearance | 17 mm |
| Keying | Keyed to differ |
| Key Profile | AB53 |
What's In The Box
- ABUS 100/80DG hasp and staple (double hinge)
- ABUS 65/30 solid brass padlock (keyed to differ)
- Keys supplied with padlock
Suitable Uses
- Timber gates and shed doors with uneven alignment.
- Doors where movement or flex is expected.
- Residential and light commercial security.
- Applications where a rigid single-hinge hasp may bind.
ABUS Hasp and Staple – Item Code Family
Frequently Asked Questions
What is the advantage of the double-hinge hasp?
The double-hinge design allows better tolerance for misaligned doors and frames.
Is this supplied keyed alike?
No. The supplied padlock is keyed to differ.
Can a different padlock be used?
Yes, provided the shackle diameter does not exceed 9 mm.
Additional Information
- Double-hinge hasps are commonly selected for timber structures that move with weather changes.
- Correct alignment during installation is still important to ensure smooth padlock operation.
- For higher-risk environments, heavier-duty hasp series should be considered.
ABUS Warranty
ABUS products sold by Terry’s Tradies Pty Ltd and its associated websites and subsidiaries are backed by a manufacturer’s warranty covering defects in materials and workmanship, and your rights under the Australian Consumer Law (ACL). Warranty periods vary by product line — refer to your product packaging or contact us at the time of purchase for the period that applies to your specific model.
Warranty Summary
How to Make a Warranty Claim
- Contact Terry’s Tradies Pty Ltd at your original place of purchase first — all warranty claims must be directed to the retailer where the product was purchased.
Phone: 07 5601 1867
Visit: U9/2 Prosper Crescent, Burleigh Heads QLD 4220 - Have your proof of purchase ready (receipt or order confirmation).
- If the fault is not immediately visible in person, provide clear photos showing the defect so the item can be assessed before a Return Merchandise Authorisation (RMA) is approved.
- Do not return the item before receiving RMA approval — items returned without approval may be sent back to you at your cost.
- Once approved, you will receive return instructions. If the item is confirmed faulty, a prepaid return freight label will be provided to cover return shipping costs.
What the Warranty Does Not Cover
- Normal wear and tear
- Damage caused by misuse, abuse, or improper installation
- Damage caused by neglect or failure to follow product instructions
- Products not purchased from an authorised retailer
Warranty claims must be lodged with the retailer where the product was originally purchased. ABUS products purchased from another retailer or website cannot be returned to Terry’s Tradies Pty Ltd and its associated websites and subsidiaries for warranty assessment.
