ABUS Hasp and Staple 100/80DG – Double Hinge Concealed Fixing
The ABUS 100DG80C is a flexible double-hinge hasp and staple from the ABUS 100 Series, designed for use with a suitable padlock selected separately. The double-hinge (DG) construction allows improved tolerance for door and frame misalignment compared with rigid single-hinge hasps.
This model is supplied without a padlock, allowing installers to select a padlock appropriate to the required security level and site conditions.
Key Features
- Hasp and staple supplied without padlock.
- Double-hinge (DG) flexible design for uneven or moving doors.
- Concealed fixing to reduce exposure of mounting screws.
- Hardened staple and hinge pins.
- Supplied display packed.
Specifications – Hasp and Staple
| Hasp Series | 100/80DG |
| Overall Length | 125 mm |
| Width | 27 mm |
| Staple Hole Diameter | 9 mm |
| Fixing Type | Double hinge, concealed fixing |
What's In The Box
- ABUS 100/80DG flexible hasp and staple
- Fixing screws
Suitable Uses
- Timber gates and shed doors subject to movement.
- Doors with uneven alignment or seasonal expansion.
- Applications where rigid hasps may bind.
- Residential and light commercial security.
ABUS Hasp and Staple – Item Code Family
Frequently Asked Questions
What is the advantage of the double-hinge hasp?
The double-hinge design allows for door and frame movement without binding.
Is a padlock supplied?
No. This product is the hasp and staple only.
What size padlock can be used?
Any padlock with a shackle diameter up to 9 mm will fit.
Additional Information
- Flexible hasps are often selected for timber structures exposed to weather movement.
- Correct alignment during installation remains important despite hinge flexibility.
- For higher-risk environments, heavier duty hasp series should be considered.
ABUS Warranty
ABUS products sold by Terry’s Tradies Pty Ltd and its associated websites and subsidiaries are backed by a manufacturer’s warranty covering defects in materials and workmanship, and your rights under the Australian Consumer Law (ACL). Warranty periods vary by product line — refer to your product packaging or contact us at the time of purchase for the period that applies to your specific model.
Warranty Summary
How to Make a Warranty Claim
- Contact Terry’s Tradies Pty Ltd at your original place of purchase first — all warranty claims must be directed to the retailer where the product was purchased.
Phone: 07 5601 1867
Visit: U9/2 Prosper Crescent, Burleigh Heads QLD 4220 - Have your proof of purchase ready (receipt or order confirmation).
- If the fault is not immediately visible in person, provide clear photos showing the defect so the item can be assessed before a Return Merchandise Authorisation (RMA) is approved.
- Do not return the item before receiving RMA approval — items returned without approval may be sent back to you at your cost.
- Once approved, you will receive return instructions. If the item is confirmed faulty, a prepaid return freight label will be provided to cover return shipping costs.
What the Warranty Does Not Cover
- Normal wear and tear
- Damage caused by misuse, abuse, or improper installation
- Damage caused by neglect or failure to follow product instructions
- Products not purchased from an authorised retailer
Warranty claims must be lodged with the retailer where the product was originally purchased. ABUS products purchased from another retailer or website cannot be returned to Terry’s Tradies Pty Ltd and its associated websites and subsidiaries for warranty assessment.
