ABUS Hasp and Staple 110/195 – Multi-Hinge Concealed Fixing
The ABUS 110195C is a flexible multi-hinge hasp and staple from the ABUS 110 Series, designed for use with a suitable padlock selected separately. The extended length and multi-hinge construction allow greater tolerance for door and frame movement on wide overlaps.
This model is supplied without a padlock, allowing installers to select a padlock appropriate to the environment and required security level.
Key Features
- Hasp and staple supplied without padlock.
- Multi-hinge flexible design for wide doors and misaligned frames.
- Concealed fixing to reduce exposure of mounting screws.
- Hardened steel staple with tear-off resistant hinge pins.
- Supplied display packed.
Specifications – Hasp and Staple
| Hasp Series | 110/195 |
| Overall Length | 195 mm |
| Width | 45 mm |
| Staple Hole Diameter | 12.5 mm |
| Material | Hardened steel |
| Fixing Type | Multi-hinge, concealed fixing |
What's In The Box
- ABUS 110/195 hasp and staple
- Fixing screws
Suitable Uses
- Large timber or steel gates with wide overlaps.
- Shed and industrial doors subject to movement.
- Doors requiring a longer fixing span.
- Commercial and light industrial security.
ABUS Hasp and Staple – Item Code Family
Frequently Asked Questions
Is a padlock supplied with this product?
No. This product is the hasp and staple only.
What size padlock can be used?
Any padlock with a shackle diameter up to 12.5 mm will fit.
Why choose a multi-hinge hasp?
Multi-hinge hasps are better suited to wide doors and structures that move or flex.
Additional Information
- This hasp is commonly selected where standard-length hasps are insufficient.
- Concealed fixings improve resistance to tampering.
- Correct alignment during installation is critical for long-term performance.
ABUS Warranty
ABUS products sold by Terry’s Tradies Pty Ltd and its associated websites and subsidiaries are backed by a manufacturer’s warranty covering defects in materials and workmanship, and your rights under the Australian Consumer Law (ACL). Warranty periods vary by product line — refer to your product packaging or contact us at the time of purchase for the period that applies to your specific model.
Warranty Summary
How to Make a Warranty Claim
- Contact Terry’s Tradies Pty Ltd at your original place of purchase first — all warranty claims must be directed to the retailer where the product was purchased.
Phone: 07 5601 1867
Visit: U9/2 Prosper Crescent, Burleigh Heads QLD 4220 - Have your proof of purchase ready (receipt or order confirmation).
- If the fault is not immediately visible in person, provide clear photos showing the defect so the item can be assessed before a Return Merchandise Authorisation (RMA) is approved.
- Do not return the item before receiving RMA approval — items returned without approval may be sent back to you at your cost.
- Once approved, you will receive return instructions. If the item is confirmed faulty, a prepaid return freight label will be provided to cover return shipping costs.
What the Warranty Does Not Cover
- Normal wear and tear
- Damage caused by misuse, abuse, or improper installation
- Damage caused by neglect or failure to follow product instructions
- Products not purchased from an authorised retailer
Warranty claims must be lodged with the retailer where the product was originally purchased. ABUS products purchased from another retailer or website cannot be returned to Terry’s Tradies Pty Ltd and its associated websites and subsidiaries for warranty assessment.
