Lockwood 216CONPPSS Push/Pull Plate Full Set Concealed Fix 300 x 65mm – Satin Stainless Steel (Box of 10)
The Lockwood 216CONPPSS is a trade pack supplying ten complete push/pull plate full sets in satin stainless steel, configured for concealed fix installation. Each full set is drawn from the Lockwood 216/217 Series 10mm Radius Corner Push/Pull Plates range.
Each set comprises a concealed-fix plain push plate for the exterior (pushing side) paired with a visible-fix interior plate fitted with a 170mm pull handle. Plates measure 300mm x 65mm x 2mm with 10mm radius corners, and fixing screws are supplied.
The 216/217 Series is designed for use with Lockwood 3570 Synergy Series and 3770 Selector Series mortice locks and is suitable for public, commercial, industrial and institutional buildings where durable push/pull door furniture is required.
Estimated Warehouse Dispatch
Usually ships in 3 business days
Usually ships in 3 business days
Trade Pack – Box of 10 Full Sets
Supplied as a bulk trade pack of ten complete push/pull plate full sets for multi-door projects.
Supplied as a bulk trade pack of ten complete push/pull plate full sets for multi-door projects.
Available Finish
Satin Stainless Steel
This trade pack is supplied in satin stainless steel. The 216/217 Series is also available in other finishes as separate SKUs.
Disability Act Compliance (DDA)
- Compliant with Australian Standard AS1428.1 for disabled access.
- Compliance applies to the pull handle design when installed correctly on the plate.
Key Features
- Trade pack of ten complete push/pull plate full sets.
- Concealed fix exterior plain push plate paired with visible fix interior pull plate.
- Slim-profile 300mm x 65mm x 2mm plates with 10mm radius corners.
- 170mm pull handle with 17.5mm diameter and 40mm finger clearance.
- Stainless steel construction with satin stainless steel finish.
- Supplied with fixing screws.
- Reversible handing suits both left and right hand doors.
- Designed for use with Lockwood 3570 Synergy and 3770 Selector Series mortice locks.
- Pull handle design complies with AS1428.1 disabled access requirements.
- Suitable for push and pull doors in high-traffic commercial applications.
- Backed by Lockwood 25 Year Mechanical Warranty.
Suitable Uses
- Multi-door project fit-outs
- Public buildings and civic facilities
- Commercial office buildings
- Industrial facilities
- Institutional buildings including schools and hospitals
- High-traffic push and pull doors
- Internal and corridor doors requiring slim-profile plates
- Applications requiring DDA-compliant pull handles
Full Specifications
Frequently Asked Questions
- What is included in this trade pack?
This SKU is supplied as a box of ten complete push/pull plate full sets. Each full set includes a concealed-fix plain push plate for the exterior, a visible-fix interior plate with a 170mm pull handle, and fixing screws. - What is the difference between concealed and visible fix?
Concealed-fix plates have studs with internal threads in each corner and are fixed from the opposite side of the door, leaving the visible face of the plate free of fixings. Visible-fix plates have countersunk holes on the face of the plate and are fixed back to back through the door. - Why is this set asymmetric in fixing style?
The exterior push side is configured as a concealed-fix plain plate, which provides a cleaner appearance on the pushing side where no handle is present. The interior pull side uses visible fix countersunk screws to securely mount the pull handle through the plate. Both plates are installed back to back through the door. - Does this pack fit all door thicknesses?
Standard fixings suit doors 35mm to 45mm thick. For doors 45mm to 55mm thick, long fixing screws SP2000-208 must be specified and ordered separately. - Is this set handed?
No. The 216CONPPSS is reversible and can be installed on either left or right hand doors.
Additional Information
- Trade Pack Format:
This SKU is a bulk trade pack. Individual plates and function-specific variants from the 216/217 Series (including cylinder, turn snib, emergency turn and engraving options) are available as separate single-unit SKUs in the Lockwood 2000 Series format. - Slim-Profile Plate:
The 216/217 Series plate is 65mm wide, making it the narrower counterpart to the 214/215 Series (100mm wide). The slim profile is commonly specified on corridor doors and internal office doors where a compact plate is preferred. - Asymmetric Fixing:
The concealed-fix exterior push plate and visible-fix interior pull plate are designed as a matched pair. Concealed fix studs on the push plate align with countersunk holes on the pull plate for back-to-back installation. - Thicker Doors:
Standard fixings suit doors 35mm to 45mm thick. For doors between 45mm and 55mm, long fixing screws (part SP2000-208) must be specified at time of ordering. - Mortice Lock Compatibility:
The 216/217 Series is designed for use with Lockwood 3570 Synergy Series and 3770 Selector Series mortice locks. Other mortice locks should be confirmed for compatibility prior to installation. - Fire Door Applications:
Where a fire rating is required, buyers should confirm that the specific plate configuration, mortice lock, door leaf and frame comprise an approved tested fire doorset assembly. Fire performance is system-based and cannot be attributed to the plate in isolation. - Maintenance:
Clean with a soft cloth and mild detergent. Avoid abrasive cleaners, acidic cleaners and scouring pads which may damage the satin stainless steel finish.
Lockwood Warranty (Australia)
Lockwood branded products purchased new in Australia from authorised resellers are covered against defects in materials and workmanship for:
Lockwood branded products purchased new in Australia from authorised resellers are covered against defects in materials and workmanship for:
- Mechanical components: 25 years
- Electrical and electronic components: 2 years (excluding batteries)
Cosmetic finishes, batteries, normal wear and tear, misuse, unauthorised modification, corrosion and labour or freight costs are excluded.
This warranty operates in addition to rights available under the Australian Consumer Law.
Download PDF Resources
Lockwood Push/Pull Door Handles Catalogue
Lockwood Push/Pull Door Handles Catalogue
Download PDF Resources
Lockwood Push/Pull Door Handles Catalogue
Lockwood Push/Pull Door Handles Catalogue
Lockwood Warranty Overview
Lockwood branded products are covered by manufacturer warranties issued by ASSA ABLOY Australia Pty Ltd. Warranty periods vary depending on product type, mechanical components, electrical elements, and finish category.
This overview summarises the structure of Lockwood warranty coverage. Full terms, exclusions and claim procedures are set out in the official Lockwood Warranty document.
Warranty Periods Summary
Finish Coverage Guide
- Everbrass finishes: up to 25 years against corrosion, tarnishing and discolouration.
- Stainless steel, polished stainless steel, chrome plating and anodised finishes: typically up to 10 years.
- Decorative finishes including Antique Copper, Architectural Bronze, Oil Rubbed Bronze, Aged Brass, Polished Brass, Satin Brass and related variants: typically up to 2 years against corrosion.
- Unlacquered brass finishes will naturally age and change appearance over time. This is not considered a defect.
- Tea staining of stainless steel is not covered where cleaning and maintenance have not been followed.
What the Warranty Covers
- Defects in material and workmanship during the applicable warranty period.
- Assessment by ASSA ABLOY to determine repair, replacement with the same or closest equivalent product, or refund of purchase price.
Common Exclusions
- Normal wear and tear.
- Misuse, abuse, accidental damage or use outside published specifications.
- Improper maintenance or failure to follow care instructions.
- Unauthorised modification, repair or use of non-genuine parts.
- Exposure to corrosive environments including coastal air, salt spray, chemicals or pollution.
- Removal, refitment or associated labour charges.
- Products not originally sold in Australia through authorised channels.
Warranty Claim Process
- Retain proof of original purchase.
- Return the product through the original place of purchase where applicable.
- If claiming directly, obtain a case number before returning goods.
- Products must be securely packed and clearly identified.
- Warranty assessment determines repair, replacement or refund.
Australian Consumer Law
Lockwood warranties operate in addition to rights available under the Australian Consumer Law. Goods come with guarantees that cannot be excluded. Customers may be entitled to a replacement or refund for a major failure and compensation for reasonably foreseeable loss or damage.
Where a product fails to meet acceptable quality standards and the failure does not amount to a major failure, the customer is entitled to repair or replacement.
