Lockwood 21725NA/P1SS Interior Push/Pull Plate with Cylinder Hole and P1 Pull Handle 300 x 65mm – Satin Stainless Steel
The Lockwood 21725NA/P1SS is an interior push/pull plate from the Lockwood 217 Series, supplied in satin stainless steel with a pre-cut oval cylinder hole and a P1 brass pull handle. The plate measures 300mm x 65mm x 2mm with 10mm radius corners.
This plate combines mortice lock cylinder access with a compact pull handle, making it suitable for interior doors in commercial and public buildings where secure access and DDA-compliant pull operation are required.
The cylinder hole is shaped for a Lockwood 570 Series oval cylinder (32mm H x 18mm W). The plate is designed for use with Lockwood 3570 Synergy Series and 3770 Selector Series mortice locks and is paired with a matching 216 Series exterior plate for back-to-back installation.
Estimated Warehouse Dispatch
Usually ships in 11 business days
Usually ships in 11 business days
Non-Returnable Item
This product is not returnable. Please confirm suitability, handing, cylinder requirements and handle configuration before ordering.
This product is not returnable. Please confirm suitability, handing, cylinder requirements and handle configuration before ordering.
Available Finish
Satin Stainless Steel
This product is supplied in satin stainless steel. The 216/217 Series is also available in other finishes as separate SKUs.
Disability Act Compliance (DDA)
- Compliant with Australian Standard AS1428.1 for disabled access.
- Compliance applies to the pull handle design when installed correctly on the plate.
Key Features
- Interior plate with pre-cut oval cylinder hole and P1 brass pull handle.
- Cylinder hole configured for Lockwood 570 Series oval cylinders (32mm H x 18mm W).
- Slim-profile 300mm x 65mm x 2mm plate with 10mm radius corners.
- Visible fix with countersunk holes for back-to-back installation through the door.
- P1 brass pull handle supplied with the plate.
- Designed for use with Lockwood 3570 Synergy and 3770 Selector Series mortice locks.
- Suitable for interior doors in commercial and public buildings.
- Pull handle design complies with AS1428.1 disabled access requirements.
- Supplied in trade pack.
- Backed by Lockwood 25 Year Mechanical Warranty.
Suitable Uses
- Commercial office buildings
- Public buildings and civic facilities
- Institutional buildings including schools and hospitals
- Internal doors requiring cylinder access
- Doors requiring slim-profile plates (65mm wide)
- Applications requiring DDA-compliant pull handles
Full Specifications
Frequently Asked Questions
- What does the part number 21725NA/P1SS represent?
The part number breaks down as: 217 (interior plate 300 x 65), 25 (pull handle and cylinder function), N (no engraving), A (oval cylinder to suit Lockwood 570 Series), /P1 (P1 brass pull handle with 108mm fixing centres), SS (satin stainless steel finish). - Which cylinder fits this plate?
The cylinder cutout is shaped for a Lockwood 570 Series oval cylinder measuring 32mm high x 18mm wide. The cylinder is not included with the plate and must be ordered separately. - Does this plate include fixing screws?
Standard fixing is back to back through the door using the matching 216 Series exterior plate. For doors 45mm to 55mm thick, long fixing screws SP2000-208 are required and must be ordered separately. - Is a matching exterior plate required?
Yes. This is an interior plate only. A matching 216 Series exterior plate must be ordered separately for back-to-back installation through the door. - Is the P1 handle the correct length for this function?
The Lockwood catalogue typically specifies a P2 handle (152mm centres) for the function 25 (pull handle and cylinder) configuration to ensure adequate clearance around the cylinder. This SKU is supplied with a P1 handle (108mm centres). Buyers should confirm that the P1 handle length provides sufficient clearance for the intended cylinder and mortice lock configuration before installation.
Additional Information
- Handle Compatibility Note:
Per the Lockwood Push/Pull Door Handles Catalogue, the standard handle/function pairing for function 25 on the 216/217 Series is the P2 handle (152mm centres). This SKU is configured with the P1 handle (108mm centres). Installers should confirm mechanical compatibility with the selected cylinder, mortice lock and door configuration prior to installation. - Cylinder Sold Separately:
The Lockwood 570 Series cylinder is not included with this plate. Buyers must confirm cylinder type (single cylinder, double cylinder or thumbturn cylinder) and keying requirements when ordering the cylinder. - Back-to-Back Installation:
Visible fix plates are designed to be fixed back to back through the door. This interior plate pairs with a matching 216 Series exterior plate configured for the same mortice lock function. - Thicker Doors:
Standard fixings suit doors 35mm to 45mm thick. For doors between 45mm and 55mm, long fixing screws (part SP2000-208) must be specified at time of ordering. - Mortice Lock Compatibility:
This plate is designed for use with Lockwood 3570 Synergy Series and 3770 Selector Series mortice locks. Other mortice locks should be confirmed for compatibility prior to installation. - Engraving:
This SKU is supplied without engraving. Engraved variants (male, female, disabled, push, pull, unisex and custom text/logo options) are available as separate SKUs in the 216/217 Series. Powdercoat finish is not available with engraving. - Maintenance:
Clean with a soft cloth and mild detergent. Avoid abrasive cleaners, acidic cleaners and scouring pads which may damage the satin finish on the plate or the lacquer on the brass handle.
Lockwood Warranty (Australia)
Lockwood branded products purchased new in Australia from authorised resellers are covered against defects in materials and workmanship for:
Lockwood branded products purchased new in Australia from authorised resellers are covered against defects in materials and workmanship for:
- Mechanical components: 25 years
- Electrical and electronic components: 2 years (excluding batteries)
Cosmetic finishes, batteries, normal wear and tear, misuse, unauthorised modification, corrosion and labour or freight costs are excluded.
This warranty operates in addition to rights available under the Australian Consumer Law.
Download PDF Resources
Lockwood Push/Pull Door Handles Catalogue
Lockwood Push/Pull Door Handles Catalogue
Download PDF Resources
Lockwood Push/Pull Door Handles Catalogue
Lockwood Push/Pull Door Handles Catalogue
Lockwood Warranty Overview
Lockwood branded products are covered by manufacturer warranties issued by ASSA ABLOY Australia Pty Ltd. Warranty periods vary depending on product type, mechanical components, electrical elements, and finish category.
This overview summarises the structure of Lockwood warranty coverage. Full terms, exclusions and claim procedures are set out in the official Lockwood Warranty document.
Warranty Periods Summary
Finish Coverage Guide
- Everbrass finishes: up to 25 years against corrosion, tarnishing and discolouration.
- Stainless steel, polished stainless steel, chrome plating and anodised finishes: typically up to 10 years.
- Decorative finishes including Antique Copper, Architectural Bronze, Oil Rubbed Bronze, Aged Brass, Polished Brass, Satin Brass and related variants: typically up to 2 years against corrosion.
- Unlacquered brass finishes will naturally age and change appearance over time. This is not considered a defect.
- Tea staining of stainless steel is not covered where cleaning and maintenance have not been followed.
What the Warranty Covers
- Defects in material and workmanship during the applicable warranty period.
- Assessment by ASSA ABLOY to determine repair, replacement with the same or closest equivalent product, or refund of purchase price.
Common Exclusions
- Normal wear and tear.
- Misuse, abuse, accidental damage or use outside published specifications.
- Improper maintenance or failure to follow care instructions.
- Unauthorised modification, repair or use of non-genuine parts.
- Exposure to corrosive environments including coastal air, salt spray, chemicals or pollution.
- Removal, refitment or associated labour charges.
- Products not originally sold in Australia through authorised channels.
Warranty Claim Process
- Retain proof of original purchase.
- Return the product through the original place of purchase where applicable.
- If claiming directly, obtain a case number before returning goods.
- Products must be securely packed and clearly identified.
- Warranty assessment determines repair, replacement or refund.
Australian Consumer Law
Lockwood warranties operate in addition to rights available under the Australian Consumer Law. Goods come with guarantees that cannot be excluded. Customers may be entitled to a replacement or refund for a major failure and compensation for reasonably foreseeable loss or damage.
Where a product fails to meet acceptable quality standards and the failure does not amount to a major failure, the customer is entitled to repair or replacement.
