Wolflok Maximum Security Mechanical Key Safe — 2.1kg
The Wolflok 960064 is a maximum-security mechanical key lock box built for outdoor wall mounting. Tested and rated to LPS1175 Issue 8 A10 by the Loss Prevention Certification Board (LPCB), it stores spare keys, fobs, and access cards securely on an external wall — no power supply, no internet connection, and no app required. A mechanical key safe works entirely through a physical combination: set your own code on the internal dials, and anyone who knows the code can access the keys at any time, day or night.
Wolflok's patented multi-push keypad technology is a world first: each of the ten buttons can be pressed up to four times to build a more memorable code, generating over 9.7 million possible combinations — more than any other mechanical key storage device on the market. The 7mm soft-touch illuminated buttons and internal vault light mean reliable access at any hour without a torch, and the double-wall zinc alloy construction with strategically positioned anti-saw reinforcement pins and coned anti-drill hinge pins delivers the physical attack resistance that earned the LPCB rating.
Designed and developed through extensive customer feedback, the Wolflok 960064 is suitable for domestic homes, rental properties, Airbnb hosts, security services, key holding agencies, facilities managers, remote sites, and anyone who needs a reliable, independently accessible key storage solution at an external wall.
Wolflok is built from zinc alloy known for its corrosion and attack resistance. The included ABS plastic weather cover provides an additional barrier against rain, UV, and dust, and contributes to the product's IP55 ingress protection rating. Fully operational from −30°C to 50°C and resistant to 96% relative humidity — tested in salt mist conditions at 35°C. Suitable for coastal Queensland installations.
Wolflok's attack resistance isn't just a certification number — it has been physically demonstrated on video. Watch the Wolflok survive a sledgehammer, flamethrower, high-pressure water blaster, tractor crush, and more.
▶ Watch the attack test on YouTube
Wolflok's patented illumination technology backlights all ten keypad buttons and the internal vault the moment you activate it — no torch needed at night. The 7mm soft-touch buttons are large enough for easy use by all ages, in any light condition.
The illumination is powered by a single replaceable Renata CR2032 coin cell battery, rated for 2 years or 2,000 cycles. Importantly, the vault is fully mechanical — if the battery goes flat, the keypad and vault light simply won't illuminate, but the lock still opens normally with the correct code. You are never locked out due to a flat battery.
Key Features
- LPS1175 Issue 8 A10 attack security rating from the Loss Prevention Certification Board (LPCB) — police-preferred standard, independently tested by BRE
- World-first patented multi-push keypad — each button usable up to 4 times, generating over 9.7 million code combinations
- Double-wall zinc alloy construction with anti-saw reinforcement pins and coned anti-drill hinge pins
- Clamshell anti-prise design and advanced anti-pick mechanism
- Illuminated keypad (7mm soft-touch buttons) and illuminated internal vault — no external power source required for illumination
- Fully mechanical operation — no battery required to open the vault; battery powers illumination only
- Replaceable Renata CR2032 illumination module battery — 2-year life or 2,000 cycles; key safe operates normally if battery is flat
- IP55 rated — limited ingress permissible; salt mist tested at 35°C
- Large internal compartment holds up to 6 keys, fobs, and access cards; two removable internal hooks
- Built-in QR code gives digital access to the full instruction manual and resources
- Includes 4 x 60mm self-tapping WFK311 security screws for A10-certified mounting on brick, concrete, stone, or single-skin walls
- Includes ABS weather cover, paper marking template, and the WFK898 code change tool
- Weight: 2.1kg
What's in the Box
Suitable Uses
- Airbnb and short-stay rental hosts — the simplest key handover solution for occasional hosts who don't need full automation. How a key safe compares to a smart lock for Airbnb hosts
- Residential emergency access — authorised family members, carers, or neighbours can access spare keys independently without being handed a physical key
- Security services and key holding agencies — A10 certification and 9.7 million combinations meet commercial key holding standards
- Facilities and property management — master key or site access for maintenance staff, contractors, and inspectors without key distribution
- Remote and unattended sites — equipment sheds, irrigation infrastructure, pumping stations, gates
- After-hours delivery access — allow service providers entry to a secured area without a callout
- Emergency and alarm access — provide first responders or alarm companies rapid entry when the owner is unavailable
- Tradesperson access during renovations — time-limited code sharing; change the code after work is complete
Wolflok Key Safe Range
Accessories & Spare Parts
Specifications
Features & Components
1 Weather cover • 2 Clear button • 3 Open dial • 4 Latch • 5 Mounting holes
6 Battery cap • 7 Light module • 8 Code change tool • 9 Code cover • 10 Code dials • 11 Standard security screws (x4)
Battery, Power & Illumination
Frequently Asked Questions
How do I set or change the code?
The code is set using the WFK898 code change tool (included and stored inside the vault). Open the vault, remove the internal cover to expose the code dials, and use the amber tool to turn each dial to the number of times that digit appears in your chosen code. Any digit not in your code is set to zero. Each digit can be used up to four times. A full walkthrough is available at How to Code Wolflok and Wolflok Pro. Always store the code change tool inside the vault — it is stored there by design as a security measure.
What does LPS1175 A10 mean, and why does it matter?
LPS1175 is the UK Loss Prevention Standard for physical attack resistance, issued by the Loss Prevention Certification Board (LPCB) — a world-recognised independent testing body operated by BRE. Issue 8 A10 is the rating achieved by the Wolflok when mounted with the supplied WFK311 screws on brick, concrete, stone, or single-skin walls. This is the rating recommended by police and insurers for key safes used in residential and commercial security applications. The rating is contingent on correct installation — see the installation guide or when DIY installation is appropriate.
What's the difference between the Wolflok and the Wolflok Pro?
Both models share the same external dimensions, keypad, illumination system, and code mechanism. The Wolflok Pro (960071) adds a third wall layer and a stainless steel internal vault liner, which increases its weight to 2.2kg and enables the higher LPS1175 B1 security rating when installed with the included XL screw kit (WFK001FK) on brick, concrete, or rendered walls. The Pro also includes both the WFK311 and WFK001FK screw kits in the box. Choose the standard Wolflok for residential and general commercial applications; choose the Wolflok Pro where the higher B1 rating is required.
What if I lose or forget the code?
There is no master override, reset code, or manufacturer recovery function. If the current code is completely unknown, the unit must be professionally removed and the vault mechanism will be damaged in the process. This is by design — no backdoor means no attack vector. Always record your code in a secure location separate from the key safe itself. Gold Coast Smart Locks does not hold codes.
Can I install the Wolflok on a rendered or timber wall?
For rendered masonry (render up to 20mm deep), the supplied WFK311 screws are not recommended — use the WFK001FK XL screw kit instead (note: B1 certification with WFK001FK applies to the Wolflok Pro only). For timber, the WFK311 screws can be used but LPS1175 certification is not maintained on wood. For guidance on surface suitability, see our installation guide or when DIY installation is appropriate.
Additional Information
The A10 rating requires correct installation. Drill only into the brick face, never mortar. Maintain at least 150mm from any wall edge or corner. The unit must sit flat — do not install on uneven surfaces. Use the supplied paper marking template (not the unit itself) as your drilling guide. Drive screws by power drill and hand-tighten the final turn only — never over-torque with a power tool. Screws are single-use; order new WFK311 screws before reinstalling. Unsure about your wall type? See when DIY installation is appropriate.
The Wolflok's zinc alloy body and IP55 rating make it suitable for coastal installations. The ABS weather cover provides an additional barrier against salt air and UV radiation, but in north or west-facing high-sun positions the cover may show signs of UV degradation before the body. See our guide to coastal key safe maintenance, and refer to the outdoor grade-C considerations for coastal-rated hardware.
The Wolflok is an ideal solution when reliable independent key access is required without any dependence on power, internet, or a mobile device. It is particularly well-suited to Airbnb hosts who manage occasional bookings, as a backup key access for households with a smart lock, or for any location where infrastructure is unreliable. For Airbnb hosts who need full automation, automated check-in, or PMS integration, a smart lock may be a better fit — see how a Bluetooth key safe compares and our guide to mechanical key safe best practice.
Choose a wall location that is not directly visible from a public street or neighbour's window. Avoid south-facing walls where moisture may pool behind the unit. Position at a comfortable height (approximately 1.0–1.4m from ground level) so the keypad can be operated easily with one hand. Never label or tag the key safe with the property address — keys inside should also be untagged.
2-year warranty as standard on the full product including the illumination module. Register for free at wolflok.com/product-registration (Australia supported) to extend to 5 years on mechanical parts. Batteries are user-replaceable and not covered. Proof of purchase required for all claims. Returns & Warranty
Page 1
Page 2
Page 3
Page 4
Page 5
Page 6
Page 7
Page 8
Page 9
Page 10
Wolflok Warranty
Warranty Summary
How to Make a Claim
- Contact Terry's Tradies Pty Ltd and its associated websites, trading names, and subsidiaries (trading as Gold Coast Smart Locks) in the first instance — do not contact the manufacturer directly for warranty claims.
- Have your proof of purchase ready (order confirmation or receipt).
- Describe the fault clearly, including the product model (Wolflok or Wolflok Pro) and when the issue first appeared.
- If directed to return the product, ensure it is securely packaged. Do not attempt disassembly — this may void the warranty.
Extend Your Warranty to 5 Years — Free Registration
Registering extends the mechanical parts warranty from 2 years to 5 years at no cost. The registration form at wolflok.com/product-registration is set up for Australian buyers — just select Australia as your country, enter your product model and date of purchase, and you're done. No registration deadline is stated, so you can register at any time after purchase.
Note: The 5-year extension applies to mechanical parts only. The illumination module remains covered for 2 years regardless of registration, and batteries are excluded from all warranty coverage.
Exclusions
The following are not covered under the Wolflok warranty:
- Damage caused by modification of the product — any modification voids warranty
- Damage resulting from installation not carried out in accordance with the supplied instructions (including use of incorrect fixings or surface types)
- Damage caused by misuse, abuse, or neglect
- Normal wear and tear
- Batteries (user-replaceable consumables)
- The illumination module beyond 2 years (not covered under the 5-year extended registration)
- Damage caused by conditions beyond the product's rated operating range
Important Notes
The product must be installed and used as described in the supplied instruction manual. Security accreditation (LPS 1175) may also be invalidated if incorrect fixings or surface types are used. Do not reuse screws if reinstalling — contact your supplier for replacement fixings.
No master or reset code exists. Wolflok key lock boxes have no master or reset code function. Lost codes cannot be recovered by the manufacturer, distributor, or retailer.
Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.
