Zanda Square Flush Pull - Satin Stainless
Elevate your space with the Zanda 5350.SS Square Flush Pull, expertly crafted from satin stainless steel for a sleek, modern touch. Its generous 100mm x 100mm design and deep 35mm recess ensure a firm grip on even the heaviest doors, making it both an elegant and practical choice for any contemporary interior.
Available Finish Options
-
Satin Stainless Steel
Suitable Uses
- Sliding doors in modern residential homes for a seamless look
- Pivot doors in upscale office spaces for a sophisticated entrance
- Large cabinet doors in high-end kitchens to enhance functionality and style
- Commercial spaces requiring heavy-duty door hardware with a sleek design
- Private meeting rooms where aesthetics and accessibility are key
Includes
- 1 x Zanda 5350.SS – Square Flush Pull (100 mm x 100 mm x 35 mm, Satin Stainless Steel)
- 1 x Installation Guide
Perfect for These Interior Styles:
- Modern Minimalism - Clean lines and understated elegance enhance functionality.
- Industrial Chic - Raw materials and bold hardware resonate with urban aesthetics.
- Contemporary Luxury - Sleek finishes and symmetry elevate high-end interiors.
Installation and Styling Tips
- Ensure precise alignment by using a level and measuring tape when installing the Zanda 5350.SS flush pull. This will enhance the symmetrical design and maintain a clean, professional look on your sliding or pivot door.
- For optimal grip, install the flush pull at a height of 1 meter from the floor, which is a comfortable reach for most users. This positioning not only enhances usability but also maintains visual balance on larger doors.
- To enhance the contemporary appeal, consider using the satin stainless steel finish in conjunction with other stainless steel elements in the room, such as door hinges or cabinet handles, creating a cohesive design theme throughout your space.
- When installing on solid-core doors, ensure the recess depth of 35mm is properly accommodated. If the door thickness exceeds this depth, consider routing out a deeper section to allow for smooth functionality and a flush finish.
- Complement the bold architecture of the flush pull by pairing it with minimalist door designs and hardware that emphasize clean lines. This can include sleek door frames or large glass panels that enhance the overall aesthetic while showcasing the flush pull as a statement piece.
Care Tips
- To maintain the satin stainless steel finish of your Zanda 5350.SS flush pull, regularly wipe it with a soft microfiber cloth dampened with warm water. This will remove fingerprints and smudges without scratching the surface. For deeper cleaning, mix a solution of equal parts vinegar and water, apply it with a cloth, and follow up with a dry microfiber cloth to prevent water spots.
- To prevent corrosion and maintain the durability of your flush pull, ensure that the surrounding door and frame are kept free from moisture and debris. Regularly check for any build-up of dust or grime in the recess area of the pull, especially after heavy use, and clean it out with a soft brush or vacuum attachment to maintain its appearance and functionality.
- If you encounter any stubborn stains or marks on the satin stainless steel finish, avoid abrasive cleaners. Instead, use a non-abrasive stainless steel cleaner applied with a soft cloth, following the grain of the metal. This will help to lift the stain without damaging the finish, preserving the sleek look of your modern architectural hardware.
 |
Zanda Warranty |
|
Zanda Sliding Door Hardware Brochure |
Zanda Warranty
Zanda Architectural products carry a limited warranty against defects in material or workmanship under normal use during the warranty period. During the warranty period, Zanda Architectural will repair or replace the product (or the defective parts) at no charge, using new or refurbished replacement parts. Warranty periods vary by product range and by component (mechanical and finish), so please check the row that matches your product below.
Warranty Summary
* Warranty periods run from the proven date of purchase and apply only when the product is properly installed and subjected to no more than fair wear and tear. See the exclusions and important notes below for full conditions.
How to Make a Claim
Zanda's warranty process starts with the reseller you purchased from. As your place of purchase, we handle the claim for you:
- Contact Terry's Tradies Pty Ltd and its associated websites, trading names, and subsidiaries (the place of purchase) with your proof of purchase and the date the product was purchased.
- Provide a clear description of the fault, along with the product range and model.
- We complete the necessary claim forms and process the claim with Zanda Architectural on your behalf. You may be asked to return the product for assessment.
- If the product is found to be defective under the warranty terms, Zanda will repair or replace it at no charge, using new or refurbished parts.
Exclusions
A warranty claim cannot be accepted for damage unless it resulted from a defect in Zanda's materials and workmanship. The following are expressly excluded:
- Surface damage occurring after purchase and not caused by defects in materials and workmanship.
- Misuse, neglect or accidental damage.
- Failure to maintain and care for the product.
- Defects or damage caused by using the product for a purpose other than that for which it was designed, such as commercial use.
- Defects or damage caused by improper installation.
- Damage caused by batteries.
- Modification and/or alteration to the product.
- Discolouration and scratches to finishes through normal use and ageing.
- Replacement of batteries.
- Normal wear and tear.
This guarantee does not extend to labour costs, freight, personal loss, death or injury, or economic, consequential or property damage of any kind. The warranty also excludes extreme environments where heat, weather and salty conditions are prevalent, and does not cover products that have not been properly maintained.
Important Notes
The products covered by this warranty are designed for residential use only - any other use (including commercial use) voids the warranty. This is a parts-only warranty: it does not cover labour costs for product removal and reinstallation.
Proper maintenance, care, cleaning and polishing in accordance with Zanda's instructions are essential to retain a product's finish - particularly soft finishes or finishes that naturally age, such as Brushed Nickel, Satin Chrome, Polished Brass, Graphite Nickel, Matt Chrome, Unlacquered Brass, Matt Brass, Rumbled Brass, Roman Brass, Natural Bronze, Oil Rubbed, Satin Brass, Brushed Bronze, Antique Bronze, Buffed Bronze, Matt Antique Bronze, Venetian Bronze and Powdercoat. These finishes are subject to deterioration, corrosion and oxidation from conditions such as salt deposits, scratches from sharp objects, paint thinners and caustic agents. For care of stainless steel products, see the ASSDA guidance on preventing coastal corrosion and tea staining.
This is a limited, express warranty and is provided in addition to your rights under the Australian Consumer Law. Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure. Nothing in this express warranty limits or restricts any other statutory right or remedy available to you.
