Zanda TS.8024.SA – Slide Arm Closer Power Adjustment
The Zanda TS.8024.SA is a durable slide arm mechanical door closer with adjustable EN power size 2–4, designed for smooth operation and long-term reliability. Suitable for medium-duty applications, it handles doors up to 1100 mm wide and 80 kg. This closer includes adjustable backcheck for controlled closing, is fire rated to Australian Standards, and non-handed for universal fitting. Backed by a 10-year warranty, it’s ideal for both commercial and residential environments.
Key Features
- Adjustable EN power size 2–4
- Supports doors up to 1100 mm wide and 80 kg
- Slide arm configuration for a sleek, low-profile appearance
- Adjustable backcheck for added control and safety
- Fire rated to Australian Standards
- Non-handed for left- or right-hand doors
- 10-year mechanical warranty
Specifications
- Item Code: TS.8024.SA
- Type: Mechanical Door Closer – Slide Arm
- Power Size: EN 2–4 (adjustable)
- Max Door Width: 1100 mm
- Max Door Weight: 80 kg
- Adjustable Backcheck: Yes
- Fire Rated: Australian Standards
- Handing: Non-handed
- Warranty: 10-Year Mechanical Warranty
- Finish Options & Codes: Matt Black (TS.8024.SA.BLK), Silver (TS.8024.SA.SE)
What's In The Box
- 1 × TS.8024.SA Door Closer – Slide Arm
- PA bracket
- Fixing screws and mounting hardware
- Installation instructions
Available Finish Options
-
Matt Black
TS.8024.SA.BLK -
Silver
TS.8024.SA.SE
Item Code Family – Zanda Door Closer Series
Download PDF Resources
|
Zanda TS.8024 Door Closer – Spec Sheet |
|
Zanda Door Controls Catalogue |
|
Zanda Compact Catalogue |
|
Zanda Architectural Catalogue |
|
Zanda Commercial Hardware Brochure |
|
Zanda Warranty |
Zanda Warranty
Zanda Architectural products carry a limited warranty against defects in material or workmanship under normal use during the warranty period. During the warranty period, Zanda Architectural will repair or replace the product (or the defective parts) at no charge, using new or refurbished replacement parts. Warranty periods vary by product range and by component (mechanical and finish), so please check the row that matches your product below.
Warranty Summary
* Warranty periods run from the proven date of purchase and apply only when the product is properly installed and subjected to no more than fair wear and tear. See the exclusions and important notes below for full conditions.
How to Make a Claim
Zanda's warranty process starts with the reseller you purchased from. As your place of purchase, we handle the claim for you:
- Contact Terry's Tradies Pty Ltd and its associated websites, trading names, and subsidiaries (the place of purchase) with your proof of purchase and the date the product was purchased.
- Provide a clear description of the fault, along with the product range and model.
- We complete the necessary claim forms and process the claim with Zanda Architectural on your behalf. You may be asked to return the product for assessment.
- If the product is found to be defective under the warranty terms, Zanda will repair or replace it at no charge, using new or refurbished parts.
Exclusions
A warranty claim cannot be accepted for damage unless it resulted from a defect in Zanda's materials and workmanship. The following are expressly excluded:
- Surface damage occurring after purchase and not caused by defects in materials and workmanship.
- Misuse, neglect or accidental damage.
- Failure to maintain and care for the product.
- Defects or damage caused by using the product for a purpose other than that for which it was designed, such as commercial use.
- Defects or damage caused by improper installation.
- Damage caused by batteries.
- Modification and/or alteration to the product.
- Discolouration and scratches to finishes through normal use and ageing.
- Replacement of batteries.
- Normal wear and tear.
This guarantee does not extend to labour costs, freight, personal loss, death or injury, or economic, consequential or property damage of any kind. The warranty also excludes extreme environments where heat, weather and salty conditions are prevalent, and does not cover products that have not been properly maintained.
Important Notes
The products covered by this warranty are designed for residential use only - any other use (including commercial use) voids the warranty. This is a parts-only warranty: it does not cover labour costs for product removal and reinstallation.
Proper maintenance, care, cleaning and polishing in accordance with Zanda's instructions are essential to retain a product's finish - particularly soft finishes or finishes that naturally age, such as Brushed Nickel, Satin Chrome, Polished Brass, Graphite Nickel, Matt Chrome, Unlacquered Brass, Matt Brass, Rumbled Brass, Roman Brass, Natural Bronze, Oil Rubbed, Satin Brass, Brushed Bronze, Antique Bronze, Buffed Bronze, Matt Antique Bronze, Venetian Bronze and Powdercoat. These finishes are subject to deterioration, corrosion and oxidation from conditions such as salt deposits, scratches from sharp objects, paint thinners and caustic agents. For care of stainless steel products, see the ASSDA guidance on preventing coastal corrosion and tea staining.
This is a limited, express warranty and is provided in addition to your rights under the Australian Consumer Law. Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure. Nothing in this express warranty limits or restricts any other statutory right or remedy available to you.
