Lockwood KB35L5 MC35 Key Blank 5 Pin C4 Broach
The Lockwood KB35L5 MC35 Key Blank 5 Pin C4 Broach is a Securiturn blank key designed for compatible Lockwood MC35 Securiturn applications. It is intended to be cut to match an existing lock, allowing replacement or additional key access where the correct C4 5 pin profile is required.
The MC35 Securiturn system is used with compatible double cylinder locks to provide the everyday convenience of a removable thumb-turn. The thumb-turn can be removed when the building is secured, using the correct release key arrangement.
This item is the blank key only. It is supplied with No Finish and must be cut by a suitable locksmith or keying professional before use. Always confirm the existing cylinder profile, pin count and keying requirement before ordering.
Typically ships in 17 Days where stock is available.
Key Features
- MC35 Securiturn blank key for compatible Lockwood applications
- C4 key profile as confirmed by manufacturer product information
- 5 pin key blank configuration
- Can be cut to match compatible existing locks for replacement or additional key access
- Supports the Lockwood Securiturn removable thumb-turn system where correctly specified
- Supplied as a blank key and must be cut before use
- Lockwood mechanical warranty applies where purchased new in Australia from authorised resellers
Suitable Uses
- Compatible Lockwood MC35 Securiturn removable thumb-turn systems
- Replacement key blank applications where KB35L5 is specified
- Additional key access where the existing lock uses the correct C4 5 pin profile
- Locksmith key cutting and servicing work
- Australian commercial, residential and light commercial sites using compatible Lockwood Securiturn hardware
Full Specifications
Fire Rated
- No standalone fire rating has been confirmed for the KB35L5 key blank.
- Fire door suitability depends on the complete lockset, cylinder, door hardware and approved door assembly, not on the blank key alone.
- For fire rated openings, confirm the complete door hardware schedule before changing or adding keying components.
Certifications and Compliance
- The wider Securiturn removable thumb-turn system is described as supporting safe use with compatible double cylinder locks.
- Supplied product information references New Zealand Building Act Means of Escape clause 7.2.2 for the Securiturn thumb-turn with Red Safe Plug, but this key blank alone is not a complete compliance solution.
- Compliance depends on the complete lock, cylinder, Securiturn hardware, release method and door application.
Frequently Asked Questions
Is this key supplied cut?
No. The KB35L5 is supplied as a blank key and must be cut to match a compatible existing lock by a suitable locksmith or keying professional.
Will this suit every Lockwood cylinder?
No. This is a 5 pin C4 profile MC35 blank key. Confirm the cylinder profile and pin count before ordering.
Is this the complete Securiturn thumb-turn kit?
No. This item is the blank key only. The Securiturn thumb-turn, release key and related hardware are separate items unless specifically supplied in another kit.
Additional Information
- This blank key is most useful where the existing Securiturn or compatible Lockwood keying arrangement needs a replacement or additional key.
- A common ordering mistake is choosing a C4 blank without confirming the pin count. This model is the 5 pin version.
- Key blanks should be cut from an accurate existing key or by code where authorised and available.
- For restricted or master keyed systems, confirm whether additional key cutting is permitted under the site key control policy.
- Where the key is required for a managed building or commercial site, match the order to the approved keying schedule before cutting.
Lockwood branded products purchased new in Australia from authorised resellers are covered against defects in materials and workmanship for:
- Mechanical components: 25 years
- Electrical and electronic components: 2 years (excluding batteries)
Lockwood Warranty Overview
Lockwood branded products are covered by manufacturer warranties issued by ASSA ABLOY Australia Pty Ltd. Warranty periods vary depending on product type, mechanical components, electrical elements, and finish category.
This overview summarises the structure of Lockwood warranty coverage. Full terms, exclusions and claim procedures are set out in the official Lockwood Warranty document.
Warranty Periods Summary
Finish Coverage Guide
- Everbrass finishes: up to 25 years against corrosion, tarnishing and discolouration.
- Stainless steel, polished stainless steel, chrome plating and anodised finishes: typically up to 10 years.
- Decorative finishes including Antique Copper, Architectural Bronze, Oil Rubbed Bronze, Aged Brass, Polished Brass, Satin Brass and related variants: typically up to 2 years against corrosion.
- Unlacquered brass finishes will naturally age and change appearance over time. This is not considered a defect.
- Tea staining of stainless steel is not covered where cleaning and maintenance have not been followed.
What the Warranty Covers
- Defects in material and workmanship during the applicable warranty period.
- Assessment by ASSA ABLOY to determine repair, replacement with the same or closest equivalent product, or refund of purchase price.
Common Exclusions
- Normal wear and tear.
- Misuse, abuse, accidental damage or use outside published specifications.
- Improper maintenance or failure to follow care instructions.
- Unauthorised modification, repair or use of non-genuine parts.
- Exposure to corrosive environments including coastal air, salt spray, chemicals or pollution.
- Removal, refitment or associated labour charges.
- Products not originally sold in Australia through authorised channels.
Warranty Claim Process
- Retain proof of original purchase.
- Return the product through the original place of purchase where applicable.
- If claiming directly, obtain a case number before returning goods.
- Products must be securely packed and clearly identified.
- Warranty assessment determines repair, replacement or refund.
Australian Consumer Law
Lockwood warranties operate in addition to rights available under the Australian Consumer Law. Goods come with guarantees that cannot be excluded. Customers may be entitled to a replacement or refund for a major failure and compensation for reasonably foreseeable loss or damage.
Where a product fails to meet acceptable quality standards and the failure does not amount to a major failure, the customer is entitled to repair or replacement.
Official Warranty Document
