Lockwood Symmetry DISTRICT Dummy Lever Set – Right Hand
The Lockwood Symmetry DISTRICT Dummy Lever Set is a right-hand only non-operating lever set designed for residential applications where decorative lever appearance is required without operational functionality.
This dummy lever features horizontal mounting screw fixing with a contemporary district lever profile, suitable for coordinating with active Symmetry locksets in residential properties. Constructed from zinc alloy lever with steel chassis and zinc bolt head, the lever set provides cost-effective decorative hardware for non-operating door applications.
Part of the comprehensive Symmetry door furniture range, this dummy lever is available in Chrome Plate or Satin Chrome finishes. The right-hand configuration is specified for doors where the hinges are on the right side when viewed from the secure or keyed side of the door.
Estimated Warehouse Dispatch
Usually ships in 3 business days
Usually ships in 3 business days
Right Hand Only Configuration
This product is right-hand specific. Please verify door handing before ordering. See handing diagram below for confirmation.
This product is right-hand specific. Please verify door handing before ordering. See handing diagram below for confirmation.
Available Finish Options
Chrome Plate
Code: 7545RCP
Satin Chrome
Code: 7545RSC
Finish selection does not affect functionality, compliance, or performance.
Key Features
- Dummy function lever for non-operating decorative applications
- Right-hand configuration only (hinges on right when viewed from secure side)
- DISTRICT lever profile for contemporary styling
- Zinc alloy lever construction with steel chassis
- Horizontal mounting screw fixing for secure installation
- Suitable for door thickness 35-51mm
- No latch, backset, or strike required (dummy function)
- Non-keyed decorative hardware
- Part of comprehensive Symmetry door furniture range
- Easy installation with supplied mounting instructions
What's in the Box
- Right-hand dummy lever assembly (pair)
- Mounting plates
- Horizontal mounting screws
- Mounting hardware
- Installation instructions
Suitable Uses
- Non-operating side of double doors (right-hand configuration)
- Inactive door panels in multi-panel systems
- Decorative applications requiring lever appearance without operation
- Coordinating furniture with active Symmetry DISTRICT locksets
- Residential interior and entrance doors
- Wardrobe and closet doors requiring right-hand decorative hardware
- Applications where contemporary DISTRICT lever styling is specified
Full Specifications
Door Handing Guide
Door handing diagram showing left-hand and right-hand configurations. This product is right-hand only. To determine handing, view the door from the secure (keyed) side. If hinges are on the left, it is left-hand. If hinges are on the right, it is right-hand.
Frequently Asked Questions
- What does right-hand only mean for this product?
This dummy lever is configured for right-hand doors only. Right-hand means when viewed from the secure (keyed) side of the door, the hinges are on the right side. This product cannot be installed on left-hand doors. - How do I determine if my door is left-hand or right-hand?
Stand on the secure (keyed) side of the door. If the hinges are on your left, it is a left-hand door. If the hinges are on your right, it is a right-hand door. Refer to the handing diagram above for visual guidance. - What is a dummy lever and when is it used?
A dummy lever is a non-operating decorative lever that does not turn or operate a latch mechanism. It is used on the inactive side of double doors, decorative applications, or anywhere the appearance of a lever is required without operational functionality. - Can this be used with active Symmetry DISTRICT locksets?
Yes. The dummy lever coordinates aesthetically with active Symmetry DISTRICT entrance locksets, passage sets, and privacy locks, providing matching appearance across operating and non-operating doors within the same property. - What door preparation is required for installation?
Dummy levers require minimal door preparation compared to operating locksets. Installation involves drilling holes for the horizontal mounting screws and securing the lever assembly. No latch preparation, backset drilling, or strike installation is required. - Is there a left-hand version available?
Yes. The left-hand version is available as a separate product with different item codes. This product (7545RH series) is right-hand only and cannot be reversed for left-hand installation.
Additional Information
- Symmetry Range Integration:
This dummy lever is part of the comprehensive Symmetry door furniture range. The DISTRICT lever profile provides contemporary styling suitable for modern residential interiors while coordinating with the broader Symmetry lockset family for consistent aesthetic appearance. - Right-Hand Specific Configuration:
This product is manufactured specifically for right-hand door applications and cannot be reversed or adapted for left-hand use. Correct handing selection is critical for proper installation and function. Verify door handing before ordering to avoid returns. - Construction Materials:
Constructed from zinc alloy lever with steel chassis and zinc bolt head, this dummy lever provides cost-effective decorative hardware suitable for residential applications where operational functionality is not required. - Horizontal Mounting System:
The horizontal mounting screw fixing provides secure installation appropriate for dummy lever applications. Installation is simplified compared to operating locksets as no latch mechanism, backset preparation, or strike installation is required. - Door Thickness Compatibility:
Suitable for timber doors with thickness ranging from 35mm to 51mm, covering most standard residential door applications. Ensure door thickness falls within this range before ordering. - Installation Guidance:
Dummy levers require through-hole preparation for mounting screws only. Installation instructions are supplied with the product. Professional installation is recommended to ensure correct alignment, secure fixing, and aesthetic coordination with active locksets where applicable. - Finish Options:
Available in Chrome Plate (CP) for bright reflective appearance, or Satin Chrome (SC) for contemporary brushed finish. Both finishes are covered by the 5 year finish guarantee against defects in materials and workmanship. - Coordinated Door Furniture:
For properties with multiple doors requiring both operating and non-operating hardware, this dummy lever coordinates with active Symmetry DISTRICT locksets to provide consistent lever profile and finish across the property.
Lockwood Warranty (Australia)
Lockwood branded products purchased new in Australia from authorised resellers are covered against defects in materials and workmanship for:
Lockwood branded products purchased new in Australia from authorised resellers are covered against defects in materials and workmanship for:
- Mechanical components: 25 years
- Chrome finishes: 5 years
Cosmetic finishes, normal wear and tear, misuse, unauthorised modification, corrosion and labour or freight costs are excluded.
This warranty operates in addition to rights available under the Australian Consumer Law.
Download PDF Resources
Lockwood Symmetry Catalogue
Lockwood Symmetry Leverset Installation Instructions
Lockwood Symmetry Catalogue
Lockwood Symmetry Leverset Installation Instructions
Lockwood Warranty
Lockwood branded products are covered by manufacturer warranties issued by ASSA ABLOY Australia Pty Ltd. Warranty periods vary by product type, with separate cover for mechanical components, electrical and electronic parts, keys, and finishes.
The summary below sets out the standard warranty structure. All warranty claims are handled by Terry's Tradies Pty Ltd and its associated websites, trading names, and subsidiaries. Full terms and exclusions are set out in the official Lockwood warranty document linked at the base of this page.
Warranty Summary
Finish Coverage Guide
- Everbrass finishes: up to 25 years against corrosion, tarnishing and discolouration.
- Stainless steel, polished stainless steel, chrome plating and anodised finishes: typically up to 10 years.
- PVD and VIVID finishes: typically up to 10 years.
- Symmetry range finishes: typically up to 5 years.
- Decorative finishes (Antique Copper, Architectural Bronze, Oil Rubbed Bronze, Aged Brass, Polished Brass, Satin Brass and related variants): typically up to 2 years against corrosion.
- Unlacquered brass finishes naturally age and change appearance over time. This is not considered a defect.
- Tea staining of stainless steel is not covered where the required cleaning and maintenance have not been followed.
How to Make a Claim
For full returns and warranty claim procedures, visit our Returns & Warranty page - this is kept up to date and is the authoritative reference for current claim steps.
- Contact Terry's Tradies Pty Ltd and its associated websites, trading names, and subsidiaries with your proof of original purchase.
- Keep the product securely packed and clearly identified, ready for assessment.
- Where a claim is escalated to the manufacturer, ASSA ABLOY may issue a case number before goods are returned.
- ASSA ABLOY assesses the claim and determines repair, replacement with the same or closest equivalent product, or refund of the purchase price.
Exclusions
- Normal wear and tear.
- Misuse, abuse, accidental damage or use outside published specifications.
- Improper maintenance or failure to follow care instructions.
- Unauthorised modification, repair or use of non-genuine parts.
- Exposure to corrosive environments including coastal air, salt spray, chemicals or pollution.
- Removal, refitment or associated labour charges.
- Products not originally sold in Australia through authorised channels.
Australian Consumer Law
These manufacturer warranties apply in addition to your rights under the Australian Consumer Law. Our goods come with guarantees that cannot be excluded under the ACL. You are entitled to a replacement or refund for a major failure and to compensation for any other reasonably foreseeable loss or damage. Where a failure does not amount to a major failure, you are entitled to have the goods repaired or replaced.
These manufacturer warranties apply in addition to your rights under the Australian Consumer Law. Our goods come with guarantees that cannot be excluded under the ACL. You are entitled to a replacement or refund for a major failure and to compensation for any other reasonably foreseeable loss or damage. Where a failure does not amount to a major failure, you are entitled to have the goods repaired or replaced.
