Lockwood 202 Exterior Round Corner Plate - Flush Pull Only | Artefact Series | Natural Anodised & Satin Stainless Steel
The Lockwood 202 Series Exterior Plate with Flush Pull Only is part of the distinguished Artefact range of round corner plate door furniture. This exterior plate features a flush pull - a recessed pull handle that sits flush with the plate surface when not in use - with no lever, cylinder or turn snib. The flush pull provides a grip point for pulling the door without a projecting handle profile.
Flush pulls are suited to applications where a projecting lever or pull handle is not desired or practical - fire doors, service doors, sliding or swing-clear doors, and environments requiring a low-profile door hardware solution. Non-handed - installs on either side of the door. Available in Natural Anodised Aluminium and Satin Stainless Steel.
Usually ships in 11 business days
Please confirm finish and suitability before ordering.
Available Finish Options
Natural Anodised
NT
Satin Stainless Steel
SS
Both finishes non-handed.
Fire Rated
- Fire rated up to 2 hours - AS1905.1:2005. Fire performance is dependent on doorset type and configuration. Compliance is system-based and limited by the FRL of the complete doorset assembly.
Key Features
- Round corner 162 x 162mm exterior plate with 10mm radius corners - Lockwood Artefact 202 Series
- Flush Pull Only (Function 31) - recessed flush pull, no projecting handle profile
- No lever, cylinder or turn snib
- Non-handed - suits either side of the door
- Concealed fixings at 4 points. Supplied in trade pack.
- Designed, assembled and customised in Australia
- Tested to Level D8 (500,000 cycles) - AS4145.2-2008. Fire rated to 2 hours - AS1905.1:2005
- Pairs back-to-back with the 203 Series interior plate (round corner). 25-year mechanical warranty.
Suitable Uses
- Fire doors, service doors and plant room doors requiring a low-profile pull without a projecting handle
- Applications where door swing clearance is limited and a recessed pull is preferred
- Push/pull pass doors and sliding doors requiring a flush grip point
- Architecturally specified projects requiring a minimal round corner plate profile
Full Specifications
Item Codes
Dimensions & Technical Drawings
Helpful Tips
- Minimum door thickness for back-to-back flush pulls: When two flush pull plates are fitted back to back, the minimum door thickness is 40mm.
- No cylinder on this plate: If keyed access is also required refer to the Flush Pull and Cylinder variant (20232NA).
- Exterior plate - pairs with 203 Series: This is the outside face plate. It must be paired with a 203 Series interior plate (round corner) - not a 201 Series. The interior plate must use visible fixings.
- Non-handed: Flush pull plates are non-handed and suit either side of the door.
- Thick doors: For doors 45-55mm, order long fixing screws SP2000-208 separately.
- Non-returnable: Confirm finish and handing before ordering - this item cannot be returned once purchased.
Mechanical: 25 years. Electrical/electronic: 2 years (excl. batteries).
- Everbrass: 25 years
- Stainless Steel, Chrome & Anodised: Up to 10 years
- PVD / VIVID: 10 years
- Symmetry: 5 years
- Decorative finishes (Bronze, Antique, Powdercoat): Typically 2 years
Lockwood 200/202 Series Handle Catalogue
Lockwood Warranty Overview
Lockwood branded products are covered by manufacturer warranties issued by ASSA ABLOY Australia Pty Ltd. Warranty periods vary depending on product type, mechanical components, electrical elements, and finish category.
This overview summarises the structure of Lockwood warranty coverage. Full terms, exclusions and claim procedures are set out in the official Lockwood Warranty document.
Warranty Periods Summary
Finish Coverage Guide
- Everbrass finishes: up to 25 years against corrosion, tarnishing and discolouration.
- Stainless steel, polished stainless steel, chrome plating and anodised finishes: typically up to 10 years.
- Decorative finishes including Antique Copper, Architectural Bronze, Oil Rubbed Bronze, Aged Brass, Polished Brass, Satin Brass and related variants: typically up to 2 years against corrosion.
- Unlacquered brass finishes will naturally age and change appearance over time. This is not considered a defect.
- Tea staining of stainless steel is not covered where cleaning and maintenance have not been followed.
What the Warranty Covers
- Defects in material and workmanship during the applicable warranty period.
- Assessment by ASSA ABLOY to determine repair, replacement with the same or closest equivalent product, or refund of purchase price.
Common Exclusions
- Normal wear and tear.
- Misuse, abuse, accidental damage or use outside published specifications.
- Improper maintenance or failure to follow care instructions.
- Unauthorised modification, repair or use of non-genuine parts.
- Exposure to corrosive environments including coastal air, salt spray, chemicals or pollution.
- Removal, refitment or associated labour charges.
- Products not originally sold in Australia through authorised channels.
Warranty Claim Process
- Retain proof of original purchase.
- Return the product through the original place of purchase where applicable.
- If claiming directly, obtain a case number before returning goods.
- Products must be securely packed and clearly identified.
- Warranty assessment determines repair, replacement or refund.
Australian Consumer Law
Lockwood warranties operate in addition to rights available under the Australian Consumer Law. Goods come with guarantees that cannot be excluded. Customers may be entitled to a replacement or refund for a major failure and compensation for reasonably foreseeable loss or damage.
Where a product fails to meet acceptable quality standards and the failure does not amount to a major failure, the customer is entitled to repair or replacement.
