Lockton E-Series Face Plate (270 x 25mm) - Suits ELEV36 Sliding Door Smart Mortice Locks
The Lockton Art. SMLFP270-25-SLD is an optional face plate for the LOCKTON E-Series sliding-door smart mortice range. It suits any sliding-door mortice lock body in the E-Series Smart range and measures 270 x 25mm.
The plate is designed to retrofit over a previous installation, giving a clean replacement face when the original plate is worn, marked, or no longer matches the door. It is universally handed, so a single item fits any sliding-door installation configuration.
This is passive hardware with no electronics, batteries, or setup. It replaces the existing face plate on the mortice lock body during a standard installation or a repair, and suits sliding-door E-Series bodies from 20mm to 45mm backset.
Key Features
- Fits the full sliding range: Suits any sliding-door mortice lock body in the LOCKTON E-Series Smart range, covering 20mm to 45mm backsets.
- Retrofit design: Designed to fit over a previous installation for a clean replacement face during an upgrade or repair.
- Universally handed: One plate fits any sliding-door installation configuration, simplifying stock and installation.
- Slim 270 x 25mm profile: Narrow 25mm width suits the slim stiles typical of sliding doors.
- Passive hardware: No electronics, batteries, or programming - it installs during standard door prep.
What's in the Box
- 1 x Lockton SMLFP270-25-SLD Face Plate, 270 x 25mm (Satin Stainless Steel)
- Fixing screws
Suitable Uses
- Replacing a worn or marked face plate on a LOCKTON E-Series sliding-door smart mortice lock
- Retrofitting a clean face plate over a previous sliding-door installation
- Refreshing the visible face when upgrading or servicing a sliding-door E-Series lock body
- Matching a face plate across sliding-door installations from 20mm to 45mm backset
Available Finish Options
Satin Stainless Steel
(This Product)
STK SMLFP270-25-SLD
Finish selection does not affect functionality, compliance, or performance.
LOCKTON E-Series ELEV36 Sliding Range & Accessories
| Item Code | Product | Type |
|---|---|---|
| SMLFP270-25-SLD | E-Series Face Plate (270 x 25mm) - Suits ELEV36 Sliding | Face plate (this product) |
| ELEV36-S | Lockton ELEV36 E-Series Smart Door Lock (Sliding Door) | Sliding-door smart mortice lock (host) |
| SML-S45 | Lockton E-Series Euro Smart Mortice Lock Body - Sliding Door - 45mm Backset | Passive sliding mortice lock body |
| SML-S20 / -S28 / -S35 | Lockton E-Series Sliding Mortice Lock Bodies - 20 / 28 / 35mm Backset | Passive sliding mortice lock bodies |
Full Specifications
| Part ID | SMLFP270-25-SLD |
| Product Type | Face plate (retrofit / new fit) |
| Face Plate Dimensions (L x W) | 270 x 25mm |
| Thickness | 2mm |
| Suits | 20 - 45mm backset E-Series sliding mortice locks |
| Door Type | Sliding |
| Handing | Universal (suits any installation configuration) |
| Finish | Satin Stainless Steel |
| Application | Retrofit over previous installation, or new installation |
| Electronics | None - passive hardware |
Dimensions
Installation & Compatibility
This face plate suits sliding-door E-Series smart mortice lock bodies from 20mm to 45mm backset. It is not intended for hinged-door mortice bodies. Confirm the door is a sliding installation and the lock body sits within the 20-45mm backset range before ordering.
Because the plate is designed to retrofit over a previous installation and is universally handed, it fits any sliding-door configuration without a left- or right-hand version. It replaces the existing face plate on the mortice lock body during standard door prep.
Frequently Asked Questions
Any sliding-door mortice lock body in the LOCKTON E-Series Smart range, covering 20mm to 45mm backsets. See the related products for the matching sliding lock bodies.
Yes. The plate is designed to retrofit over a previous installation, so it suits an upgrade or a repair as well as a new fit.
Yes. The plate is universally handed and fits any sliding-door installation configuration.
No. This face plate is for sliding-door E-Series bodies. Hinged-door mortice bodies use a different face plate.
No. It is passive hardware with no electronics or batteries and fits during a standard door installation or repair.
Additional Information
A face plate is the visible strip that sits on the edge of the door over the mortice lock body. Over time it can wear, mark, or no longer match a refreshed door, and this plate provides a clean replacement that fits over the previous installation without changing the lock body itself.
The 25mm width matches the slim faceplates used across the E-Series sliding bodies, which carry a 270 x 22mm faceplate reference. Confirm the backset of your sliding lock body falls within the 20-45mm range so the cut-outs line up. For the neatest result on a retrofit, remove the old plate and check the mortice pocket edge is clean before fitting.
The plate is a passive part - it does not change how the smart lock operates, its access methods, or its warranty. It is commonly ordered as a service or refresh item on existing sliding-door E-Series installations.
Warranty
Lockton products carry tiered manufacturer warranties - up to 10 years on mechanical locks, 3 years on smart locks and PVD/chrome finishes, and 1 year on electronic door closers, mechanical digital locks, and key accessories. Batteries carry no warranty. Proof of purchase required for all claims. Returns & Warranty | Lockton Warranty Statement
What's in the Box - SMLFP270-25-SLD Face Plate
- 1 x Lockton SMLFP270-25-SLD Face Plate, 270 x 25mm (Satin Stainless Steel)
- Fixing screws
Lockton SMLFP270-25-SLD Face Plate - Dimensions
Lockton Warranty
Lockton Security products are designed and manufactured to high standards of quality, durability, and performance. All Lockton branded products come with guarantees in accordance with the Australian Consumer Law, and additional warranties are offered as detailed below.
Warranty Summary
Warranty periods run from the date of purchase. Proof of purchase is required for all claims.
How to Make a Claim
Lockton products are sold exclusively through trade channels. End-users who have received a Lockton product via an installer or trade supplier should contact their installer in the first instance — the trade supplier will liaise with Lockton Security to process the claim on your behalf.
To lodge a warranty claim through Terry’s Tradies Pty Ltd and its associated websites, trading names, and subsidiaries (including Gold Coast Smart Locks), please follow these steps:
- Contact us with details of the defect and, where possible, installation images.
- Supply your proof of purchase (invoice number or receipt).
- Provide contact details for claim updates.
- A Goods Return Number (GRN) will be obtained from Lockton Security on your behalf.
- Package the product securely, include the GRN, and return it as directed. Products returned without a GRN may not be accepted.
Once a correctly submitted claim is assessed by Lockton Security and approved, they will at their own cost and discretion either: repair and return the product; provide a replacement or similar product; supply refurbished goods of equivalent type and quality (covered under the remaining warranty period); or refund the purchase price. If the claim is not approved, Lockton Security will advise in writing and the product will be returned at the customer’s expense, or recycled upon request.
Exclusions
The Lockton warranty does not cover:
- Damage caused by improper use or incorrect product selection
- Improper installation
- Fair wear and tear
- Environmental conditions outside product specifications (e.g. coastal air, high humidity, or exposure to corrosive substances)
- Products that have been modified, repaired, or altered
- Use of non-genuine replacement parts or accessories
- Batteries (no warranty applies)
Important Notes
Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure. The Lockton manufacturer warranty is offered in addition to, and does not limit, these statutory rights.
Further Information
Returns & Warranty — goldcoastsmartlocks.com.au
Lockton Security — Warranty Statement
