Legge Rebate Kit DR13 – Satin Chrome
The Legge DR13 rebate kit is designed for use with Legge 990D and 990S series mortice bolts where the door preparation is rebated. It provides the correct strike and faceplate arrangement for a 15 mm rebated door setup, helping achieve proper bolt engagement and a clean finished installation.
Key Features
- Rebate kit to suit Legge 990D and 990S series mortice bolts.
- Designed for 15 mm rebated door preparations.
- Helps maintain correct strike alignment on rebated frames.
- Satin chrome finish to match compatible hardware.
Specifications
- Item Code: LEGDR13SC
- Brand: Legge
- Product Type: Rebate kit
- Suits: Legge 990D and 990S series mortice bolts
- Rebate: 15 mm
- Finish: Satin Chrome
What's In The Box
- 1 × Legge rebate kit DR13 (components to suit rebated preparation)
Suitable Uses
- Rebated door and frame preparations using Legge 990D series mortice bolts.
- Rebated door and frame preparations using Legge 990S series mortice bolts.
- Commercial door hardware installations requiring a rebate strike solution.
Dimensions
| Dimension | Size |
|---|---|
| Plate Size | 184 × 28 mm |
| Rebate Preparation | 15 mm |
Frequently Asked Questions
- What does a rebate kit do?
It provides the correct strike arrangement for doors and frames that have a rebated preparation, helping the bolt align and engage correctly. - Which products does this suit?
It is designed to suit Legge 990D and 990S series mortice bolts. - Is this for a specific rebate size?
Yes. It is intended for 15 mm rebated door preparations.
Additional Information
- Rebate kits are typically required where the door stop or frame profile prevents a standard flat strike from seating correctly.
- When ordering, confirm the mortice bolt series and the rebate depth to avoid misalignment during installation.
Legge Warranty
Legge products are manufactured by Allegion and distributed in Australia by LSC. Allegion warrants its products to be free from defects in material and workmanship for the periods listed below, from the date of purchase. Warranty periods vary by product series - refer to your product documentation or the Allegion warranty page to confirm coverage for your specific model.
Warranty Summary
How to Make a Claim
For full returns and warranty claim procedures, visit our Returns & Warranty page - this is kept up to date and is the authoritative reference for current claim steps.
- Contact Terry's Tradies Pty Ltd and its associated websites, trading names, and subsidiaries with your proof of purchase and a description of the fault.
- Our team will assess your claim and advise on next steps, which may include return of the product for inspection.
- If the product is determined to be defective under the warranty terms, it will be repaired or replaced at Allegion's option. Allegion reserves the right to inspect the installation of defective products before any removal or return is arranged.
- Goods returned under warranty must be freighted prepaid to Allegion.
Exclusions
The Allegion warranty does not cover:
- Deterioration of decorative finishes (unless those finishes are specifically listed as warranted for the product)
- Defects or damage caused or contributed to by failure to properly install or maintain the product
- Failure to follow Allegion's instructions or guidelines
- Use of the product for any application other than that specified at the time of order
- Continued use of the product after a defect has become apparent or would have been apparent to a reasonably prudent user
- Fair wear and tear, accident, or act of God
- Products that have been repaired, altered, or overhauled without Allegion's consent
- Incidental or consequential damages arising from any breach of warranty
Important Notes
PVD & Colour Finish Matching
Legge PVD finishes (including Satin Antique Bronze, Gunmetal, and Satin Gold) are proprietary to Allegion's manufacturing process. Exact colour matching to tapware or fixtures from other manufacturers is not guaranteed - variations in tone, texture, and reflectivity are an inherent characteristic of the process and are not considered a defect under the Allegion warranty.
Legge PVD finishes (including Satin Antique Bronze, Gunmetal, and Satin Gold) are proprietary to Allegion's manufacturing process. Exact colour matching to tapware or fixtures from other manufacturers is not guaranteed - variations in tone, texture, and reflectivity are an inherent characteristic of the process and are not considered a defect under the Allegion warranty.
Australian Consumer Law
Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure. This warranty does not exclude, restrict, or modify any statutory rights you may have under Australian Consumer Law.
Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure. This warranty does not exclude, restrict, or modify any statutory rights you may have under Australian Consumer Law.
