BDS Lockset Wrap to Suit BRAVA 6000 and 8000 Series - 35mm Door - Satin Stainless Steel
The BDS 11351135 is a stainless steel lockset wrap plate designed to suit BRAVA EU6000, EV6000 and EV8000 series locksets.
It is commonly specified to reinforce damaged door faces or to add strength around entrance lock installations on 35mm thick doors using a 70mm backset.
Key Features
- Lockset wrap plate to suit BRAVA EU6000, EV6000 and EV8000 series.
- Designed for 35mm thick doors with a 70mm backset.
- Reinforces damaged or weakened door faces around the lockset cutout.
- Suits heavy duty entrance style lever sets.
- 55mm hole diameter to suit standard lever set spindles.
- Manufactured from stainless steel, finished in satin stainless steel.
Suitable Uses
- Repairing doors with enlarged or damaged lockset cutouts.
- Strengthening entrance doors fitted with BRAVA EU6000, EV6000 or EV8000 series lever sets.
- Retrofit installations on commercial and residential doors where the door face requires reinforcement.
Full Specifications
BDS Lockset Wrap Plates - Item Code Family
Frequently Asked Questions
- What locksets does this wrap suit?
The 11351111351135 is designed to suit entrance style locksets with a 70mm backset on doors 35mm thick. It is suited to BRAVA EU6000, EV6000 and EV8000 series lever sets. It is not intended for use with standard residential locksets or different backset sizes. - Can this wrap be used on a door thicker or thinner than 35mm?
No. This wrap plate is sized for 35mm thick doors only. For 40mm thick doors, refer to the related Item Code Family table for the correct variant. - Does this include the lockset?
No. This is the wrap plate only. The BRAVA EU6000, EV6000 or EV8000 series lockset is purchased separately. - Can this be used on a new door installation or is it only for repairs?
While most commonly specified for repair or reinforcement of damaged door faces, it can also be used on new installations where additional face reinforcement around the lockset cutout is required. - Is correct alignment critical during installation?
Yes. The wrap must be centred accurately over the spindle hole and aligned with the latch cutout. Misalignment will prevent smooth lever and latch operation and may result in premature wear.
Additional Information
- Commonly specified during refurbishment or repair of doors where the lockset cutout has been damaged, enlarged, or requires reinforcement around BRAVA 6000 or 8000 series hardware.
- The 55mm spindle hole is sized to suit BRAVA EU6000, EV6000 and EV8000 series lever set spindles. Confirm spindle diameter before ordering if pairing with other brands.
- Correct alignment is critical - the plate must be centred over the spindle hole and squared to the latch cutout before fixing to ensure smooth lever and latch operation.
- When ordering for a complete door, two wrap plates are typically required - one for each face. Confirm quantity before ordering.
