ABUS 83/80 Replacement Shackle – 80 mm Solid Base (Non-Spring)
The ABUS 8380SA80 is an 80 mm solid base replacement shackle designed for ABUS 83/80 serviceable padlocks that are configured without spring-loaded operation. Manufactured from special hardened alloy steel, this shackle is intended for fixed, non-sprung applications where automatic shackle return is not required.
Key Features
- Genuine ABUS replacement shackle for 83/80 padlocks.
- 80 mm vertical shackle clearance.
- 15 mm shackle diameter to suit the 83/80 platform.
- Manufactured from special hardened alloy steel.
- Solid base design – not drilled for a shackle spring.
- For non-spring-loaded padlock configurations only.
Specifications
- Item Code: 8380SA80
- Brand: ABUS
- Product Type: Replacement shackle (non-spring)
- Suits: ABUS 83/80 padlocks (non-spring configuration)
- Shackle Material: Special hardened alloy steel
- Base Type: Solid
ABUS 83/80 Replacement Shackles – Item Code Family
Frequently Asked Questions
Can this shackle be used with a shackle spring?
No. This is a solid base shackle and is not compatible with spring-loaded mechanisms.
How do I confirm if my padlock is spring-loaded?
Spring-loaded padlocks use a hollow base shackle with an internal spring and guide pin.
What is the most common ordering mistake?
Confusing solid and hollow (spring) base shackles.
Additional Information
- Solid base shackles are preferred where simplicity and fixed operation are required.
- Using a solid shackle in a spring-loaded padlock will prevent correct locking.
- Always confirm padlock configuration before ordering replacement shackles.
ABUS Warranty
ABUS products sold by Terry’s Tradies Pty Ltd and its associated websites and subsidiaries are backed by a manufacturer’s warranty covering defects in materials and workmanship, and your rights under the Australian Consumer Law (ACL). Warranty periods vary by product line — refer to your product packaging or contact us at the time of purchase for the period that applies to your specific model.
Warranty Summary
How to Make a Warranty Claim
- Contact Terry’s Tradies Pty Ltd at your original place of purchase first — all warranty claims must be directed to the retailer where the product was purchased.
Phone: 07 5601 1867
Visit: U9/2 Prosper Crescent, Burleigh Heads QLD 4220 - Have your proof of purchase ready (receipt or order confirmation).
- If the fault is not immediately visible in person, provide clear photos showing the defect so the item can be assessed before a Return Merchandise Authorisation (RMA) is approved.
- Do not return the item before receiving RMA approval — items returned without approval may be sent back to you at your cost.
- Once approved, you will receive return instructions. If the item is confirmed faulty, a prepaid return freight label will be provided to cover return shipping costs.
What the Warranty Does Not Cover
- Normal wear and tear
- Damage caused by misuse, abuse, or improper installation
- Damage caused by neglect or failure to follow product instructions
- Products not purchased from an authorised retailer
Warranty claims must be lodged with the retailer where the product was originally purchased. ABUS products purchased from another retailer or website cannot be returned to Terry’s Tradies Pty Ltd and its associated websites and subsidiaries for warranty assessment.
