ABUS 83/80 Shackle Spring – For Hollow Base Shackles (A0615234)
The ABUS A0615234 is a genuine replacement shackle spring used during servicing of ABUS 83/80 series padlocks fitted with a hollow base shackle. This component is supplied as a single service spare and is intended for professional locksmith maintenance, refurbishment, and repair work.
Key Features
- Genuine ABUS replacement shackle spring.
- Specified for 83/80 series padlock shackles with hollow base.
- Restores correct shackle return and locking feel.
- Supplied as 1 piece.
- Service component only – not a complete shackle or padlock.
Specifications
- Brand: ABUS
- Item Code: A0615234
- Component Type: Shackle spring
- Pack Size: 1
- Suits: ABUS 83/80 series padlocks with hollow base shackle
What’s In The Box
- 1 × ABUS 83/80 shackle spring (A0615234)
Suitable Uses
- Replacement of weak, damaged, or missing shackle springs.
- Padlock refurbishment where the shackle has been removed.
- Professional locksmith servicing of ABUS 83/80 padlocks.
ABUS 83/80 Padlock Service Spares – Item Code Family
| Item Code | Spare Part | Pack Size | Notes |
|---|---|---|---|
| A0615234 | 83/80 Shackle Spring | 1 | This model – hollow base shackle |
| A0615233 | Cylinder Retaining Screw | 1 | Secures removable cylinder |
| A0037042 | Ball Bearing – Stainless Steel | 10 | Locking mechanism component |
| A0609425 | 3 in 1 Bolt Driver – Z Series | 1 | Revision-specific (Z series) |
| A0615235 | Shackle Spring Guide Pin | 1 | Alignment component |
Frequently Asked Questions
Is this a complete shackle assembly?
No. This item is the shackle spring only.
Will this suit all ABUS 83/80 padlocks?
It is specified for 83/80 shackles with hollow base. Other shackle constructions are not confirmed.
Can this be fitted without padlock disassembly?
No. Shackle spring replacement requires partial disassembly and is normally carried out during servicing.
Additional Information
- ABUS 83 series padlocks are widely used in Australia for keyed alike and master keyed systems.
- Shackle springs are commonly replaced when padlocks are heavily cycled or reconditioned.
- Working over a tray during disassembly helps prevent loss of small internal components.
ABUS Warranty
ABUS products sold by Terry’s Tradies Pty Ltd and its associated websites and subsidiaries are backed by a manufacturer’s warranty covering defects in materials and workmanship, and your rights under the Australian Consumer Law (ACL). Warranty periods vary by product line — refer to your product packaging or contact us at the time of purchase for the period that applies to your specific model.
Warranty Summary
How to Make a Warranty Claim
- Contact Terry’s Tradies Pty Ltd at your original place of purchase first — all warranty claims must be directed to the retailer where the product was purchased.
Phone: 07 5601 1867
Visit: U9/2 Prosper Crescent, Burleigh Heads QLD 4220 - Have your proof of purchase ready (receipt or order confirmation).
- If the fault is not immediately visible in person, provide clear photos showing the defect so the item can be assessed before a Return Merchandise Authorisation (RMA) is approved.
- Do not return the item before receiving RMA approval — items returned without approval may be sent back to you at your cost.
- Once approved, you will receive return instructions. If the item is confirmed faulty, a prepaid return freight label will be provided to cover return shipping costs.
What the Warranty Does Not Cover
- Normal wear and tear
- Damage caused by misuse, abuse, or improper installation
- Damage caused by neglect or failure to follow product instructions
- Products not purchased from an authorised retailer
Warranty claims must be lodged with the retailer where the product was originally purchased. ABUS products purchased from another retailer or website cannot be returned to Terry’s Tradies Pty Ltd and its associated websites and subsidiaries for warranty assessment.
