ABUS 65/40 Replacement Hardened Steel Shackle - 63 mm
This ABUS replacement shackle is a hardened steel shackle designed to suit ABUS 65/40 series padlocks. It provides a 63 mm vertical shackle clearance and is supplied as a spare or service replacement where additional clearance is required.
Key Features
- Replacement hardened steel shackle for ABUS 65/40 padlocks.
- 63 mm vertical shackle clearance for extended reach.
- 6.5 mm shackle diameter.
- Polished steel finish.
- Suitable for service repair or clearance upgrade.
Specifications
- Item Code: 654063SHK
- Compatible Padlocks: ABUS 65/40 series
- Shackle Material: Hardened steel
- Finish: Polished steel
- Shackle Diameter: 6.5 mm
- Vertical Shackle Clearance: 63 mm
What's In The Box
- 1 × ABUS hardened steel replacement shackle (63 mm)
Suitable Uses
- Replacing damaged shackles on ABUS 65/40 padlocks.
- Increasing clearance where standard shackles are too short.
- Locksmith servicing and refurbishment.
ABUS 65/40 Shackle Size Comparison
| Shackle Length | Diameter | Typical Use |
|---|---|---|
| 40 mm | 6.5 mm | Standard replacement |
| 63 mm (This model) | 6.5 mm | Extra clearance applications |
Download PDF Resources
|
ABUS Padlocks Catalogue |
Additional Information
- Longer replacement shackles are commonly used where original hasps or staples have been upgraded.
- Increasing shackle length can improve access but also increases exposure to cutting attacks.
- This replacement shackle does not change the locking mechanism or security rating of the padlock.
ABUS Warranty
ABUS products sold by Terry’s Tradies Pty Ltd and its associated websites and subsidiaries are backed by a manufacturer’s warranty covering defects in materials and workmanship, and your rights under the Australian Consumer Law (ACL). Warranty periods vary by product line — refer to your product packaging or contact us at the time of purchase for the period that applies to your specific model.
Warranty Summary
How to Make a Warranty Claim
For full returns and warranty claim procedures, visit our
Returns & Warranty page
— this is kept up to date and is the authoritative reference for current claim steps.
- Contact Terry’s Tradies Pty Ltd at your original place of purchase first — all warranty claims must be directed to the retailer where the product was purchased.
Phone: 07 5601 1867
Visit: U9/2 Prosper Crescent, Burleigh Heads QLD 4220 - Have your proof of purchase ready (receipt or order confirmation).
- If the fault is not immediately visible in person, provide clear photos showing the defect so the item can be assessed before a Return Merchandise Authorisation (RMA) is approved.
- Do not return the item before receiving RMA approval — items returned without approval may be sent back to you at your cost.
- Once approved, you will receive return instructions. If the item is confirmed faulty, a prepaid return freight label will be provided to cover return shipping costs.
What the Warranty Does Not Cover
- Normal wear and tear
- Damage caused by misuse, abuse, or improper installation
- Damage caused by neglect or failure to follow product instructions
- Products not purchased from an authorised retailer
Important Note
Warranty claims must be lodged with the retailer where the product was originally purchased. ABUS products purchased from another retailer or website cannot be returned to Terry’s Tradies Pty Ltd and its associated websites and subsidiaries for warranty assessment.
Warranty claims must be lodged with the retailer where the product was originally purchased. ABUS products purchased from another retailer or website cannot be returned to Terry’s Tradies Pty Ltd and its associated websites and subsidiaries for warranty assessment.
