Lockwood 21724NN/P2 Interior Push/Pull Plate with P2 Pull Handle 300 x 65mm
The Lockwood 21724NN/P2 is an interior push/pull plate from the Lockwood 217 Series fitted with a P2 brass pull handle. The plate measures 300mm x 65mm x 2mm with 10mm radius corners and is supplied as a plain plate with no cylinder cutout and no engraving.
This configuration is suitable for interior doors in commercial and public buildings where a compact pull plate with no access control function is required. The 216/217 Series is designed for use with Lockwood 3570 Synergy Series and 3770 Selector Series mortice locks.
Visible fix plates have countersunk holes and fix back to back through the door, paired with a matching 216 Series exterior plate (ordered separately). This product is available in multiple finishes — select the required finish variant from the options listed below.
Estimated Warehouse Dispatch
Usually ships in 11 business days
Usually ships in 11 business days
Non-Returnable Item
This product is not returnable. Please confirm suitability, handing, finish and handle configuration before ordering.
This product is not returnable. Please confirm suitability, handing, finish and handle configuration before ordering.
Available Finish Options
Aged Brass
21724NN/P2AG
Architectural Bronze Unlacquered
21724NN/P2AU
Architectural Bronze
21724NN/P2AZ
Polished Brass Unlacquered
21724NN/P2BU
316 Marine Grade Stainless Steel
21724NN/P2MG
Oil Rubbed Bronze
21724NN/P2ORB
Polished Brass
21724NN/P2PB-
Polished Stainless Steel
21724NN/P2PS 
Satin Brass
21724NN/P2SB
Satin Stainless Steel
21724NN/P2SS
Finish selection does not affect functionality, compliance, or mechanical performance. Select the finish variant from the product page options.
Disability Act Compliance (DDA)
- Compliant with Australian Standard AS1428.1 for disabled access.
- Compliance applies to the pull handle design when installed correctly on the plate.
Key Features
- Interior plate with P2 brass pull handle.
- Plain interior plate with no cylinder cutout and no engraving.
- Slim-profile 300mm x 65mm x 2mm plate with 10mm radius corners.
- P2 brass pull handle with 170mm length and 152mm fixing centres.
- Visible fix with countersunk holes for back-to-back installation through the door.
- Designed for use with Lockwood 3570 Synergy and 3770 Selector Series mortice locks.
- Non-handed, suitable for left or right hand doors.
- Pull handle design complies with AS1428.1 disabled access requirements.
- Available in ten finish variants to suit architectural specifications.
- Supplied in trade pack.
- Backed by Lockwood 25 Year Mechanical Warranty.
Suitable Uses
- Commercial office buildings
- Public buildings and civic facilities
- Institutional buildings including schools and hospitals
- Industrial facilities
- Internal doors requiring a plain pull plate without cylinder access
- Doors requiring slim-profile plates (65mm wide)
- Applications requiring DDA-compliant pull handles
Full Specifications
Frequently Asked Questions
- What does the part number 21724NN/P2 represent?
The part number breaks down as: 217 (interior plate 300 x 65), 24 (pull handle only function), N (no engraving), N (no cylinder function), /P2 (P2 brass pull handle with 152mm fixing centres). A finish suffix is added to create each finish variant (for example SS, PB, AG). - Which finishes are available?
Ten finishes are available: Aged Brass, Architectural Bronze Unlacquered, Architectural Bronze, Polished Brass Unlacquered, 316 Marine Grade Stainless Steel, Oil Rubbed Bronze, Polished Brass, Polished Stainless Steel, Satin Brass and Satin Stainless Steel. - Does this plate include fixing screws?
Fixing screws are not included. Standard fixing is back to back through the door using the matching 216 Series exterior plate. For doors 45mm to 55mm thick, long fixing screws SP2000-208 are required and must be ordered separately. - Is a matching exterior plate required?
Yes. This is an interior plate only. A matching 216 Series exterior plate must be ordered separately for back-to-back installation through the door. - Do unlacquered finishes age over time?
Yes. Unlacquered finishes (Architectural Bronze Unlacquered, Polished Brass Unlacquered, Aged Brass) are designed to develop a natural patina over time. Lacquered and plated finishes retain a consistent appearance for longer under normal indoor conditions.
Additional Information
- Catalogue Handle Pairing Note:
The Lockwood Push/Pull Door Handles Catalogue typically recommends a P4 handle (250mm centres) for function 24 (Pull Handle Only) without engraving on the 216/217 Series, to provide a full-length grip across the plate. This SKU is configured with the shorter P2 handle (152mm centres). Buyers should confirm the handle length meets their ergonomic and specification requirements prior to installation. - Finish and Material Pairing:
Brass-family finishes (Polished Brass, Satin Brass, Aged Brass, Polished Brass Unlacquered, Architectural Bronze, Architectural Bronze Unlacquered, Oil Rubbed Bronze) are applied to brass plates. Stainless steel finishes (Satin Stainless Steel, Polished Stainless Steel, 316 Marine Grade) are applied to stainless steel plates. - Marine Grade Applications:
The 316 Marine Grade Stainless Steel variant is specified where enhanced corrosion resistance is required, such as coastal installations or high-humidity environments. - Unlacquered Finishes:
Unlacquered brass and bronze finishes will naturally age and develop a patina over time based on environment and handling. This is a characteristic of the finish, not a defect. - Back-to-Back Installation:
Visible fix plates are designed to be fixed back to back through the door. This interior plate pairs with a matching 216 Series exterior plate. - Thicker Doors:
Standard fixings suit doors 35mm to 45mm thick. For doors between 45mm and 55mm, long fixing screws (part SP2000-208) must be specified at time of ordering. - Mortice Lock Compatibility:
This plate is designed for use with Lockwood 3570 Synergy Series and 3770 Selector Series mortice locks. Other mortice locks should be confirmed for compatibility prior to installation. - Maintenance:
Clean with a soft cloth and mild detergent. Avoid abrasive cleaners, acidic cleaners and scouring pads. Lacquered finishes require gentle cleaning to avoid damaging the protective lacquer.
Lockwood Warranty (Australia)
Lockwood branded products purchased new in Australia from authorised resellers are covered against defects in materials and workmanship for:
Lockwood branded products purchased new in Australia from authorised resellers are covered against defects in materials and workmanship for:
- Mechanical components: 25 years
- Electrical and electronic components: 2 years (excluding batteries)
Cosmetic finishes, batteries, normal wear and tear, misuse, unauthorised modification, corrosion and labour or freight costs are excluded.
This warranty operates in addition to rights available under the Australian Consumer Law.
Download PDF Resources
Lockwood Push/Pull Door Handles Catalogue
Lockwood Push/Pull Door Handles Catalogue
Download PDF Resources
Lockwood Push/Pull Door Handles Catalogue
Lockwood Push/Pull Door Handles Catalogue
Lockwood Warranty
Lockwood branded products are covered by manufacturer warranties issued by ASSA ABLOY Australia Pty Ltd. Warranty periods vary by product type, with separate cover for mechanical components, electrical and electronic parts, keys, and finishes.
The summary below sets out the standard warranty structure. All warranty claims are handled by Terry's Tradies Pty Ltd and its associated websites, trading names, and subsidiaries. Full terms and exclusions are set out in the official Lockwood warranty document linked at the base of this page.
Warranty Summary
Finish Coverage Guide
- Everbrass finishes: up to 25 years against corrosion, tarnishing and discolouration.
- Stainless steel, polished stainless steel, chrome plating and anodised finishes: typically up to 10 years.
- PVD and VIVID finishes: typically up to 10 years.
- Symmetry range finishes: typically up to 5 years.
- Decorative finishes (Antique Copper, Architectural Bronze, Oil Rubbed Bronze, Aged Brass, Polished Brass, Satin Brass and related variants): typically up to 2 years against corrosion.
- Unlacquered brass finishes naturally age and change appearance over time. This is not considered a defect.
- Tea staining of stainless steel is not covered where the required cleaning and maintenance have not been followed.
How to Make a Claim
For full returns and warranty claim procedures, visit our Returns & Warranty page - this is kept up to date and is the authoritative reference for current claim steps.
- Contact Terry's Tradies Pty Ltd and its associated websites, trading names, and subsidiaries with your proof of original purchase.
- Keep the product securely packed and clearly identified, ready for assessment.
- Where a claim is escalated to the manufacturer, ASSA ABLOY may issue a case number before goods are returned.
- ASSA ABLOY assesses the claim and determines repair, replacement with the same or closest equivalent product, or refund of the purchase price.
Exclusions
- Normal wear and tear.
- Misuse, abuse, accidental damage or use outside published specifications.
- Improper maintenance or failure to follow care instructions.
- Unauthorised modification, repair or use of non-genuine parts.
- Exposure to corrosive environments including coastal air, salt spray, chemicals or pollution.
- Removal, refitment or associated labour charges.
- Products not originally sold in Australia through authorised channels.
Australian Consumer Law
These manufacturer warranties apply in addition to your rights under the Australian Consumer Law. Our goods come with guarantees that cannot be excluded under the ACL. You are entitled to a replacement or refund for a major failure and to compensation for any other reasonably foreseeable loss or damage. Where a failure does not amount to a major failure, you are entitled to have the goods repaired or replaced.
These manufacturer warranties apply in addition to your rights under the Australian Consumer Law. Our goods come with guarantees that cannot be excluded under the ACL. You are entitled to a replacement or refund for a major failure and to compensation for any other reasonably foreseeable loss or damage. Where a failure does not amount to a major failure, you are entitled to have the goods repaired or replaced.
