Lockwood 21544NN/P2SS Interior Push/Pull Plate with Offset P2 Pull Handle 300 x 100mm – Satin Stainless Steel
The Lockwood 21544NN/P2SS is an interior push/pull plate from the Lockwood 215 Series, supplied in satin stainless steel with an offset P2 brass pull handle. The plate measures 300mm x 100mm x 2mm with 10mm radius corners and is fitted with a P2 pull handle offset from the bottom of the plate.
This interior plate has no cylinder cutout and no turn snib, making it a plain internal plate configured for pull-only operation. It is part of the Lockwood 214/215 Series door furniture range, designed for use with Lockwood 3570 Synergy Series and 3770 Selector Series mortice locks in public, commercial, industrial and institutional buildings.
Visible fix plates have countersunk holes and fix back to back through the door, which must be paired with a matching 214 Series exterior plate (ordered separately).
Usually ships in 11 business days
This product is not returnable. Please confirm suitability, handing and configuration before ordering.
Available Finish
Satin Stainless Steel
This product is supplied in satin stainless steel. The 214/215 Series is also available in other finishes as separate SKUs.
Fire Rated
- Successfully tested up to 4 hours on fire door assemblies in accordance with Australian Standard AS1905.1-2005 Part 1: Fire Resistant Doorsets.
- Fire performance applies only when installed as part of an approved fire-rated doorset assembly.
- Fire compliance is system-based and is limited by the Fire Resistance Level of the complete doorset.
Disability Act Compliance (DDA)
- Compliant with Australian Standard AS1428.1 for disabled access.
- Compliance applies to the pull handle design when installed correctly on the plate.
Key Features
- Interior plate with P2 brass pull handle offset from the bottom of the plate.
- Plain interior plate with no cylinder cutout and no turn snib.
- 10mm radius corner design for a clean, modern plate profile.
- Visible fix plate with countersunk holes, fixed back to back through the door.
- Designed for use with Lockwood 3570 Synergy and 3770 Selector Series mortice locks.
- Non-handed interior plate, suitable for left or right hand doors.
- Suitable for high-traffic public, commercial, industrial and institutional buildings.
- Pull handle design complies with AS1428.1 disabled access requirements.
- Fire tested to AS1905.1-2005 Part 1 up to 4 hours on approved doorsets.
- Supplied in trade pack.
Suitable Uses
- Public buildings and civic facilities
- Commercial office buildings
- Industrial facilities
- Institutional buildings including schools and hospitals
- High-traffic internal doors
- Fire-rated doorset assemblies
- Applications requiring DDA-compliant pull handles
Full Specifications
Frequently Asked Questions
- What is the meaning of the “44” in the part number?
The 44 function code indicates a plain plate with a pull handle only, offset from the bottom of the plate. There is no cylinder hole and no turn snib on this plate. - Does this plate include fixing screws?
Screws are not included with this plate when ordered alone. Standard fixing is back to back through the door using the matching 214 exterior plate. For doors 45mm to 55mm thick, long fixing screws SP2000-208 are required and must be ordered separately. - Is a matching exterior plate required?
Yes. This is an interior plate only. A matching 214 Series exterior plate must be ordered separately for back-to-back fixing through the door. - Is this plate handed?
No. The 21544NN/P2SS is non-handed and can be installed on either left or right hand doors. - Is the handle stainless steel?
The plate is stainless steel with a satin finish. The P2 pull handle supplied with this SKU is brass. Both P series (brass) and stainless steel handle options exist across the 214/215 range, but this specific SKU includes the brass P2 variant.
Additional Information
- Part Number Structure:
The Lockwood 2000 Series part number is broken down as: 215 (interior plate 300 x 100), 44 (pull handle only offset from bottom), N (no engraving), N (no cylinder function), /P2 (P2 brass pull handle, 152mm centres), SS (satin stainless steel finish). - Back-to-Back Installation:
Visible fix plates are designed to be fixed back to back through the door. Installers must confirm that both sides of the door are specified with matching 214 Series plates and correct door thickness requirements. - Thicker Doors:
Standard fixings suit doors 35mm to 45mm thick. For doors between 45mm and 55mm, long fixing screws (part SP2000-208) must be specified at time of ordering. - Fire Door Applications:
Fire performance is achieved only when the complete doorset (door leaf, frame, hardware and seals) is assembled in accordance with the tested configuration. The plate itself cannot provide a fire rating in isolation. - Mortice Lock Compatibility:
This plate is designed for use with Lockwood 3570 Synergy Series and 3770 Selector Series mortice locks. Other mortice locks should be confirmed for compatibility prior to installation. - Engraving:
This SKU is supplied without engraving. Engraved variants (male, female, disabled, push, pull, unisex and custom text/logo options) are available as separate SKUs in the 214/215 Series. Powdercoat finish is not available with engraving. - Maintenance:
Clean with a soft cloth and mild detergent. Avoid abrasive cleaners, acidic cleaners and scouring pads which may damage the satin finish on the plate or the lacquer on brass handles.
Lockwood branded products purchased new in Australia from authorised resellers are covered against defects in materials and workmanship for:
- Mechanical components: 25 years
- Electrical and electronic components: 2 years (excluding batteries)
Lockwood Push/Pull Door Handles Catalogue
Lockwood Push/Pull Door Handles Catalogue
Lockwood Warranty Overview
Lockwood branded products are covered by manufacturer warranties issued by ASSA ABLOY Australia Pty Ltd. Warranty periods vary depending on product type, mechanical components, electrical elements, and finish category.
This overview summarises the structure of Lockwood warranty coverage. Full terms, exclusions and claim procedures are set out in the official Lockwood Warranty document.
Warranty Periods Summary
Finish Coverage Guide
- Everbrass finishes: up to 25 years against corrosion, tarnishing and discolouration.
- Stainless steel, polished stainless steel, chrome plating and anodised finishes: typically up to 10 years.
- Decorative finishes including Antique Copper, Architectural Bronze, Oil Rubbed Bronze, Aged Brass, Polished Brass, Satin Brass and related variants: typically up to 2 years against corrosion.
- Unlacquered brass finishes will naturally age and change appearance over time. This is not considered a defect.
- Tea staining of stainless steel is not covered where cleaning and maintenance have not been followed.
What the Warranty Covers
- Defects in material and workmanship during the applicable warranty period.
- Assessment by ASSA ABLOY to determine repair, replacement with the same or closest equivalent product, or refund of purchase price.
Common Exclusions
- Normal wear and tear.
- Misuse, abuse, accidental damage or use outside published specifications.
- Improper maintenance or failure to follow care instructions.
- Unauthorised modification, repair or use of non-genuine parts.
- Exposure to corrosive environments including coastal air, salt spray, chemicals or pollution.
- Removal, refitment or associated labour charges.
- Products not originally sold in Australia through authorised channels.
Warranty Claim Process
- Retain proof of original purchase.
- Return the product through the original place of purchase where applicable.
- If claiming directly, obtain a case number before returning goods.
- Products must be securely packed and clearly identified.
- Warranty assessment determines repair, replacement or refund.
Australian Consumer Law
Lockwood warranties operate in addition to rights available under the Australian Consumer Law. Goods come with guarantees that cannot be excluded. Customers may be entitled to a replacement or refund for a major failure and compensation for reasonably foreseeable loss or damage.
Where a product fails to meet acceptable quality standards and the failure does not amount to a major failure, the customer is entitled to repair or replacement.
