Lockwood 203 Interior Round Corner Plate - Lever 96 Only | Artefact Series | Multiple Finishes
The Lockwood 203 Series Interior Plate with Lever 96 Only provides a DDA-compliant Lever 96 on the interior face with no cylinder - lever-operated interior latch release without keying. This is the broadest finish range interior lever plate in the 203 Series, with 12 variants spanning six finishes and both hands.
Notable variants include Polished Brass Unlacquered (BU) and Satin Brass (SB) in Right Hand only. Polished Brass (PB) and Polished Stainless Steel (PS) are available in both hands. Pairs with the 202 Series exterior plate using visible fixings.
Usually ships in 11 business days
Please confirm finish and handing before ordering. Decorative brass finish variants are non-returnable.
Available Finish Options
316 Marine Grade
MG
Natural Anodised
NT
Polished Brass
PB
Polished Brass Unlacquered
BU
Right Hand only
Polished Stainless Steel
PS
Satin Brass
SB
Right Hand only- Satin Stainless Steel
SS
Polished Brass Unlacquered (BU) and Satin Brass (SB): Right Hand only. All other finishes available in both hands. Brass finishes are decorative - refer to finish warranty guide below.
Fire Rated
- Fire rated up to 4 hours - AS1905.1:2005. Fire performance is dependent on doorset type and configuration. Compliance is system-based and limited by the FRL of the complete doorset assembly.
Disability Act Compliance (DDA)
- The Artefact 200 Series with lever meets the requirements of AS1428.1-2009, Design for Access and Mobility.
- Suitable for applications requiring DDA-compliant door hardware under the BCA. Lever compliance relates to handle design only and does not imply full building compliance.
Key Features
- Round corner 162 x 162mm interior plate with 10mm radius corners - Lockwood Artefact 203 Series
- Lever Only (Function 05) - lever retracts latch from interior, no cylinder or key required
- Lever 96 - AS1428.1-2009 compliant
- No cylinder or engraving - clean unadorned interior face
- Broadest finish range in the 203 Series lever-only interior plate
- Visible fixings at 4 points. Fixing screws not included. Supplied in trade pack.
- Fire rated to 4 hours - AS1905.1:2005. D8 tested. Pairs with 202 Series exterior plate.
Full Specifications
Item Codes
Dimensions & Technical Drawings
Helpful Tips
- BU and SB - Right Hand only: Polished Brass Unlacquered and Satin Brass are Right Hand only. Contact us for left hand availability.
- Decorative brass warranty: Polished Brass, Polished Brass Unlacquered and Satin Brass are decorative finishes with a shorter finish warranty - refer to the guide below.
- Unlacquered brass note: BU (Polished Brass Unlacquered) will naturally age and its appearance will change over time. For more information contact us.
- Fixing screws not supplied: The visible fixing screws for this interior plate are not included and must be ordered separately to suit the door thickness.
- Interior plate - pairs with 202 Series: This is the inside face plate. It must be paired with a 202 Series exterior plate (round corner). The interior plate uses visible fixings; the exterior 202 plate uses concealed fixings.
- Handing: Determined by which side the hinges are on when facing the door from outside. Left hand = hinges on the left. The interior plate handing must match the exterior plate.
- 202 vs 200 Series: The 203 Series (this plate) has 10mm radius round corners and pairs with the 202 exterior. For square corner interior plates refer to the 201 Series.
- Thick doors: For doors 45-55mm, order long fixing screws SP2000-208 separately.
- Non-returnable: Confirm finish and handing before ordering - this item cannot be returned once purchased.
Mechanical: 25 years. Electrical/electronic: 2 years (excl. batteries).
- Everbrass: 25 years
- Stainless Steel, Chrome & Anodised: Up to 10 years
- PVD / VIVID: 10 years
- Symmetry: 5 years
- Decorative finishes (Bronze, Antique, Powdercoat): Typically 2 years
Lockwood 200/202 Series Handle Catalogue
Lockwood Push Pull Door Handles Catalogue
Lockwood Warranty Overview
Lockwood branded products are covered by manufacturer warranties issued by ASSA ABLOY Australia Pty Ltd. Warranty periods vary depending on product type, mechanical components, electrical elements, and finish category.
This overview summarises the structure of Lockwood warranty coverage. Full terms, exclusions and claim procedures are set out in the official Lockwood Warranty document.
Warranty Periods Summary
Finish Coverage Guide
- Everbrass finishes: up to 25 years against corrosion, tarnishing and discolouration.
- Stainless steel, polished stainless steel, chrome plating and anodised finishes: typically up to 10 years.
- Decorative finishes including Antique Copper, Architectural Bronze, Oil Rubbed Bronze, Aged Brass, Polished Brass, Satin Brass and related variants: typically up to 2 years against corrosion.
- Unlacquered brass finishes will naturally age and change appearance over time. This is not considered a defect.
- Tea staining of stainless steel is not covered where cleaning and maintenance have not been followed.
What the Warranty Covers
- Defects in material and workmanship during the applicable warranty period.
- Assessment by ASSA ABLOY to determine repair, replacement with the same or closest equivalent product, or refund of purchase price.
Common Exclusions
- Normal wear and tear.
- Misuse, abuse, accidental damage or use outside published specifications.
- Improper maintenance or failure to follow care instructions.
- Unauthorised modification, repair or use of non-genuine parts.
- Exposure to corrosive environments including coastal air, salt spray, chemicals or pollution.
- Removal, refitment or associated labour charges.
- Products not originally sold in Australia through authorised channels.
Warranty Claim Process
- Retain proof of original purchase.
- Return the product through the original place of purchase where applicable.
- If claiming directly, obtain a case number before returning goods.
- Products must be securely packed and clearly identified.
- Warranty assessment determines repair, replacement or refund.
Australian Consumer Law
Lockwood warranties operate in addition to rights available under the Australian Consumer Law. Goods come with guarantees that cannot be excluded. Customers may be entitled to a replacement or refund for a major failure and compensation for reasonably foreseeable loss or damage.
Where a product fails to meet acceptable quality standards and the failure does not amount to a major failure, the customer is entitled to repair or replacement.
