Lockwood 200 Series Exterior Plate with Guarded Cylinder Hole – P1 Pull Handle
The Lockwood Artefact 200 Series exterior plate measures 162mm x 162mm and features square corners with concealed fixing. This configuration includes a guarded oval cylinder hole and P1 pull handle.
Concealed fixed plates incorporate internal threaded studs at each corner. Plates are fixed back-to-back through the door when paired with the corresponding internal plate.
Estimated Warehouse Dispatch: 11 Days
Key Features
- 162mm x 162mm square corner exterior plate.
- Guarded oval cylinder hole preparation.
- Includes P1 pull handle.
- Concealed fixing configuration.
- Suitable for Lockwood 3770 Selector and 3570 Synergy mortice locks.
- Designed, assembled and customised in Australia.
Fire Rated
- Successfully tested up to 4 hours when installed with an approved Lockwood mortice lock.
- Tested in accordance with AS1905.1:2005 – Fire Resistant Doorsets.
- Fire performance dependent on the complete door assembly.
Specifications
- Series: 200 Series Artefact
- Plate Size: 162mm x 162mm
- Plate Thickness: 2mm stainless
- Configuration: Exterior Plate – Guarded Cylinder & P1 Pull Handle
- Door Thickness: 35–45mm standard
- Fixing: Concealed
- Handing: Left or Right
- Materials: Stainless Steel
Dimensions
Available Finish Options
Satin Stainless Steel
SS
Frequently Asked Questions
What is a guarded cylinder hole?
A guarded cylinder hole provides additional protection around the oval cylinder to reduce tampering and improve durability in commercial applications.
Is this plate fire rated?
Yes. The Artefact 200 Series has been tested up to 4 hours in accordance with AS1905.1:2005 when installed with an approved mortice lock.
Does this include the cylinder?
No. Cylinders are ordered separately.
Are extended fixings available?
Yes. For doors thicker than 45mm, long fixing screws SP2000-208 must be specified.
Additional Information
Artefact 200 Series plates are designed to suit commercial and architectural applications requiring a square plate aesthetic with concealed fixing. When pairing with an internal plate, ensure compatible handing and cylinder preparation is specified.
Warranty
- General Warranty: 25 years on mechanical parts and workmanship
- Keys: 12 months
- Finishes: Everbrass 25 yrs; Stainless/Chrome/Anodised 10 yrs; PVD incl. VIVID 10 yrs; Symmetry range 5 yrs; Decorative finishes (Bronze, Antique, Powdercoat) 2 yrs; natural brass ageing excluded
- Stainless Steel: Warranty excludes natural tea staining if not cleaned per care instructions
Lockwood Warranty
Lockwood branded products are covered by manufacturer warranties issued by ASSA ABLOY Australia Pty Ltd. Warranty periods vary by product type, with separate cover for mechanical components, electrical and electronic parts, keys, and finishes.
The summary below sets out the standard warranty structure. All warranty claims are handled by Terry's Tradies Pty Ltd and its associated websites, trading names, and subsidiaries. Full terms and exclusions are set out in the official Lockwood warranty document linked at the base of this page.
Warranty Summary
Finish Coverage Guide
- Everbrass finishes: up to 25 years against corrosion, tarnishing and discolouration.
- Stainless steel, polished stainless steel, chrome plating and anodised finishes: typically up to 10 years.
- PVD and VIVID finishes: typically up to 10 years.
- Symmetry range finishes: typically up to 5 years.
- Decorative finishes (Antique Copper, Architectural Bronze, Oil Rubbed Bronze, Aged Brass, Polished Brass, Satin Brass and related variants): typically up to 2 years against corrosion.
- Unlacquered brass finishes naturally age and change appearance over time. This is not considered a defect.
- Tea staining of stainless steel is not covered where the required cleaning and maintenance have not been followed.
How to Make a Claim
- Contact Terry's Tradies Pty Ltd and its associated websites, trading names, and subsidiaries with your proof of original purchase.
- Keep the product securely packed and clearly identified, ready for assessment.
- Where a claim is escalated to the manufacturer, ASSA ABLOY may issue a case number before goods are returned.
- ASSA ABLOY assesses the claim and determines repair, replacement with the same or closest equivalent product, or refund of the purchase price.
Exclusions
- Normal wear and tear.
- Misuse, abuse, accidental damage or use outside published specifications.
- Improper maintenance or failure to follow care instructions.
- Unauthorised modification, repair or use of non-genuine parts.
- Exposure to corrosive environments including coastal air, salt spray, chemicals or pollution.
- Removal, refitment or associated labour charges.
- Products not originally sold in Australia through authorised channels.
These manufacturer warranties apply in addition to your rights under the Australian Consumer Law. Our goods come with guarantees that cannot be excluded under the ACL. You are entitled to a replacement or refund for a major failure and to compensation for any other reasonably foreseeable loss or damage. Where a failure does not amount to a major failure, you are entitled to have the goods repaired or replaced.
