Lockwood FLUID FE200 2 Point Exit Device - Vertical Latch
The Lockwood FLUID FE200 Series 2 point vertical latch exit device provides compliant emergency egress for commercial applications requiring dual vertical locking. It delivers escape function at all times by pushing the horizontal operating bar.
This configuration does not include cylinder dogging. For hold-open functionality, refer to the FE2/1V cylinder dogging model.
Estimated Warehouse Dispatch: 2 Days
Key Features
- Two point vertical latching panic exit device.
- Provides escape function at all times via push bar.
- Brushed stainless steel bolt.
- Up to 500kg resistance at each latching point.
- Tested to 1,000,000 cycles.
- Auxiliary bolt activation from 1mm.
- Opening force less than 20N.
- Bar can be cut down to 350mm.
- Rod covers supplied as standard.
- 25 Year Mechanical Warranty.
Fire Rated
- Successfully tested on fire door assemblies in accordance with AS1905.1-2005.
- Fire performance dependent on complete door assembly and installation.
Standards and Compliance
- Conforms to CE EN1125-2008.
- Designed for compliant emergency egress applications.
Specifications
- Series: FLUID FE200 Series
- Configuration: 2 Point Vertical Latch
- Dogging: Not included
- Door Width Options: 900mm (FE209/0VSIL), 1200mm (FE212/0VSIL)
- Maximum Door Height: 2300mm standard
- Extension Kit: FE0050SIL Vertical Rod Extension for doors up to 3000mm
- Finish: Silver (SIL)
- Cycle Testing: 1,000,000 cycles
- Latch Resistance: Up to 500kg per latching point
Dimensions
Dimensions
Available Variants
- FE209/0VSIL - 2 Point Vertical Latch - 900mm
- FE212/0VSIL - 2 Point Vertical Latch - 1200mm
Warranty
- General Warranty: 25 years on mechanical parts and workmanship
- Keys: 12 months
- Finishes: Everbrass 25 yrs; Stainless/Chrome/Anodised 10 yrs; PVD incl. VIVID 10 yrs; Symmetry range 5 yrs; Decorative finishes (Bronze, Antique, Powdercoat) 2 yrs; natural brass ageing excluded
- Stainless Steel: Warranty excludes natural tea staining if not cleaned per care instructions
Download PDF Resources
|
Lockwood Panic Exit Devices Catalogue |
|
Lockwood Panic Exit Instructions |
|
FE0010SIL Cylinder Dogging Kit Instructions |
|
FE0050SIL Extension Rod Instructions |
|
FE5000SIL External Trim Instructions |
Frequently Asked Questions
Is this suitable for fire doors?
Yes, when installed on approved fire door assemblies in accordance with AS1905.1-2005.
Does this include dogging?
No. This model does not include cylinder dogging.
Can this be used on doors over 2300mm?
Yes, when paired with the FE0050SIL Vertical Rod Extension Kit.
Additional Information
The FE200 2 point vertical configuration is suitable for commercial doors requiring dual vertical engagement and compliant emergency egress. For cylinder dogging functionality, refer to FE2/1V configuration.
Lockwood Warranty
Lockwood branded products are covered by manufacturer warranties issued by ASSA ABLOY Australia Pty Ltd. Warranty periods vary by product type, with separate cover for mechanical components, electrical and electronic parts, keys, and finishes.
The summary below sets out the standard warranty structure. All warranty claims are handled by Terry's Tradies Pty Ltd and its associated websites, trading names, and subsidiaries. Full terms and exclusions are set out in the official Lockwood warranty document linked at the base of this page.
Warranty Summary
Finish Coverage Guide
- Everbrass finishes: up to 25 years against corrosion, tarnishing and discolouration.
- Stainless steel, polished stainless steel, chrome plating and anodised finishes: typically up to 10 years.
- PVD and VIVID finishes: typically up to 10 years.
- Symmetry range finishes: typically up to 5 years.
- Decorative finishes (Antique Copper, Architectural Bronze, Oil Rubbed Bronze, Aged Brass, Polished Brass, Satin Brass and related variants): typically up to 2 years against corrosion.
- Unlacquered brass finishes naturally age and change appearance over time. This is not considered a defect.
- Tea staining of stainless steel is not covered where the required cleaning and maintenance have not been followed.
How to Make a Claim
- Contact Terry's Tradies Pty Ltd and its associated websites, trading names, and subsidiaries with your proof of original purchase.
- Keep the product securely packed and clearly identified, ready for assessment.
- Where a claim is escalated to the manufacturer, ASSA ABLOY may issue a case number before goods are returned.
- ASSA ABLOY assesses the claim and determines repair, replacement with the same or closest equivalent product, or refund of the purchase price.
Exclusions
- Normal wear and tear.
- Misuse, abuse, accidental damage or use outside published specifications.
- Improper maintenance or failure to follow care instructions.
- Unauthorised modification, repair or use of non-genuine parts.
- Exposure to corrosive environments including coastal air, salt spray, chemicals or pollution.
- Removal, refitment or associated labour charges.
- Products not originally sold in Australia through authorised channels.
These manufacturer warranties apply in addition to your rights under the Australian Consumer Law. Our goods come with guarantees that cannot be excluded under the ACL. You are entitled to a replacement or refund for a major failure and to compensation for any other reasonably foreseeable loss or damage. Where a failure does not amount to a major failure, you are entitled to have the goods repaired or replaced.
